Anyone could do it!! The Most Convienient Logo-printing Method

[Systemdertoten]

AWESOME!! Except...how come you didn't crop off the excess tape? Also I recommend Scotch tape for smooth cubesmith tiles, the texture is much similar.

I couldn't remove the tape with the tools I had at that moment; I'll try to remove it later.

 

[Elbeasto94]

that sucks, I have inkjet

 

[cyoubx]

I just did it with an inkjet. Works really well actually. I found that I had to rub the tape before running it through water. I used normal, scotch tape. I'm going to try this with packing tape next.

 

[timeless]

u can use clear printing labels too

 

[cyoubx]

Found a better way for inkjet printers.

After messing around with this, I've found that scotch tape works quite well with ink. Instead of using water, lightly set the tape onto the logo. Press gingerly, then remove the tape from the paper. It doesn't matter if the ink is drying or not, both states will work.

Below is the end result.

EDIT: It turns out the video above demonstrates what I did. The packing tape in the video obviously works better, but I don't currently have that

 

[Vinny]

Found a better way for inkjet printers.

After messing around with this, I've found that scotch tape works quite well with ink. Instead of using water, lightly set the tape onto the logo. Press gingerly, then remove the tape from the paper. It doesn't matter if the ink is drying or not, both states will work.

Below is the end result.

EDIT: It turns out the video above demonstrates what I did. The packing tape in the video obviously works better, but I don't currently have that

I love you.

 

[Deleted member 12389]

Using the laser printer method, I now have a chinese character logo for my mf8 legend.

Thanks!

 

[daniel0731ex]

Just for those of you who don't know, laser printer = toner.

 

[Vinny]

I did it using Cyoubx's idea. It worked pretty good!

 

[Vinny]

Random bump because I'm bored. I made a tutorial for YouTube:

 

[jakkspeedcuber]

Nice tutorial, it works with my inkjet !

 

[Linalai66]

Thanks This is awsome!

 

[Deleted member 12389]

My lunhui now has a colored logo printed with laser printer. Awesome tutorial!

 

[professoralpha7]

I keep rubbing off the ink along with the tape.

 

[Riley]

Doesn't the water ruin the tape's stickiness?

 

[Vinny]

I keep rubbing off the ink along with the tape.

Just press the tape on the paper and carefully peel it off without ripping the paper off with it, it's another way to keep the ink on.

 

[Georgeanderre]

Doesn't the water ruin the tape's stickiness?

Not if you leave it to dry

 

[Deleted member 12389]

it leaves a remnant of stickness behind. Sufficient to stick it on to the cube. Its 2 days since I stuck mine on. Its still intact.

 

[Deleted member 12389]

Doesn't the water ruin the tape's stickiness?

it leaves a remnant of stickness behind. Sufficient to stick it on to the cube. Its 2 days since I stuck mine on. Its still intact.

 

[Linalai66]

i dont even know which kind of printer i have
lol