A flaw of the guhong

Whyusosrs?

Veteran
Joined
Jul 7, 2010
Messages
494
For those of you that have the guhong you know how those corners are held together. The little Y shaped piece. Now, for those of you who don't know, the guhong corner is made by 3 pieces. The pieces are joined by another piece that is Y shaped. This piece is inserted into each corner so that they are joined together.

I was cubing today and what do I see? 1 piece of my corner has come off and is now on my floor. Not the whole corner just 1 of the 3 pieces. I looked at it and I looked at the remaining part of my corner. That y shaped piece had snapped off and 1 part of the y shaped piece was stickigg into the part that had fallen off while the other Two were still joined. The corner that had broken off still has part of that Y shaped still in it. No matter what I tried I couldn't get it out, it was jammed in. So it thought it was ruined. Well, I just superglued them together on the inside.

I think it is only a temporary fix, but I just wanted to warn you guhong users. You guys might want to check out your Y pieces and see if you have any wear. If you do, you should replace them with the extras they sent.
 
Last edited:
I think you were cubing too hard. Sounds like that 1/3 of the corner got stuck on something and you tried to force it.
 
For those of you that have the guhong you know how those corners are held together. The little Y shaped piece. Now, for those of you who don't know, the guhong corner is made by 3 pieces. The pieces are joined by another piece that is Y shaped. This piece is inserted into each corner so that they are joined together.

...

I think it is only a temporary fix, but I just wanted to warn you guhong users. You guys might want to check out your Y pieces and see if you have any wear. If you do, you should replace them with the extras they sent.

It sounds like you only put one of the Y pieces in each corner, they should have two. The spares you have are probably the ones you left out.
 
Rorix: Some people have talked about how corner cutting is better if you leave the Y piece out of the end (the part that goes inside the cube, what is normall a rounded triangle but looks like a v-cube piece instead). I'm not sure how true that is, but my GuHong isn't even lubed yet and can cut corners pretty well.
 
Rorix: Some people have talked about how corner cutting is better if you leave the Y piece out of the end (the part that goes inside the cube, what is normall a rounded triangle but looks like a v-cube piece instead). I'm not sure how true that is, but my GuHong isn't even lubed yet and can cut corners pretty well.

Tried it out. Not a big difference.
 
I Just lubed mine with Lubix, it works decently well, but I'm unsure if I've used too little or too much as it feels "gummy" the way it did before lube in certain spots. I'm going to do some more solves with it and see what happens.

I wasn't sure how much of a difference it would make, but thanks for the heads up.
 
I Just lubed mine with Lubix, it works decently well, but I'm unsure if I've used too little or too much as it feels "gummy" the way it did before lube in certain spots. I'm going to do some more solves with it and see what happens.

I wasn't sure how much of a difference it would make, but thanks for the heads up.

Sounds like you used a bit too much. Just keep working it in, or if its really bad, try wiping some off with a towel.
 
Well I did the 6 points at the core, then a small dot (pretty small) on one edge then I popped the piece back in and went to town. It took about 5 seconds of fast random scrambling to feel a difference, but it was VERY noticeable. The thing is, before it was lubed, it felt gummy to solve. There's just this one area that feels similar. I'm going to hold out and see what happens.

I feel like I didn't put enough Lubix into my AV, but I'll keep solving it and see what happens.
 
It sounds like you only put one of the Y pieces in each corner, they should have two. The spares you have are probably the ones you left out.


What?! Oops. I, too, thought the extra Y pieces were just spares. Maybe I'll go back in and add the extra pieces...cube seems fine though.

I put VERY little Lubix into the GuHong (a drop and a half?) and it became nearly frictionless almost immediately. Other cubes I've tried have felt gummed up. I am beginning to think I put too much in them...either that or it just reacts better with the GuHong's plastic.
 
It sounds like you only put one of the Y pieces in each corner, they should have two. The spares you have are probably the ones you left out.


What?! Oops. I, too, thought the extra Y pieces were just spares. Maybe I'll go back in and add the extra pieces...cube seems fine though.

I put VERY little Lubix into the GuHong (a drop and a half?) and it became nearly frictionless almost immediately. Other cubes I've tried have felt gummed up. I am beginning to think I put too much in them...either that or it just reacts better with the GuHong's plastic.

You're kidding right? What exactly is half a drop?
 
I put VERY little Lubix into the GuHong (a drop and a half?) and it became nearly frictionless almost immediately. Other cubes I've tried have felt gummed up. I am beginning to think I put too much in them...either that or it just reacts better with the GuHong's plastic.

You're kidding right? What exactly is half a drop?


Uh...like a 2nd drop that's about half the size of the first?
 
I put VERY little Lubix into the GuHong (a drop and a half?) and it became nearly frictionless almost immediately. Other cubes I've tried have felt gummed up. I am beginning to think I put too much in them...either that or it just reacts better with the GuHong's plastic.

You're kidding right? What exactly is half a drop?


Uh...like a 2nd drop that's about half the size of the first?

You're missing the point.
 
I put VERY little Lubix into the GuHong (a drop and a half?) and it became nearly frictionless almost immediately. Other cubes I've tried have felt gummed up. I am beginning to think I put too much in them...either that or it just reacts better with the GuHong's plastic.

You're kidding right? What exactly is half a drop?


Uh...like a 2nd drop that's about half the size of the first?

You're missing the point.

Elaborate.
 
I put VERY little Lubix into the GuHong (a drop and a half?) and it became nearly frictionless almost immediately. Other cubes I've tried have felt gummed up. I am beginning to think I put too much in them...either that or it just reacts better with the GuHong's plastic.

You're kidding right? What exactly is half a drop?


Uh...like a 2nd drop that's about half the size of the first?

You're missing the point.

Elaborate.

He said he put a drop and a half in. He also said he put in a small amount. Both of which are vague. A drop can literally be any size. It would help if he compared the size of the drop to something such as the size of a pea.
 
I put VERY little Lubix into the GuHong (a drop and a half?) and it became nearly frictionless almost immediately. Other cubes I've tried have felt gummed up. I am beginning to think I put too much in them...either that or it just reacts better with the GuHong's plastic.

You're kidding right? What exactly is half a drop?


Uh...like a 2nd drop that's about half the size of the first?

You're missing the point.

Elaborate.

He said he put a drop and a half in. He also said he put in a small amount. Both of which are vague. A drop can literally be any size. It would help if he compared the size of the drop to something such as the size of a pea.

Is this a drop?
flood.jpg
 
Back
Top