HaiYan vs TaiYan Cube

computingeee

Regular
Joined
Jan 22, 2010
Messages
80
I ordered the Type F-II for someone through PopBuying.com
I like it very much, but I would like to try something else.

I heard about two cubes that are very good and high level:
HaiYan Cube and the TaiYan Cube.

The HaiYan is a little bit more expensive than the taiyan.

what is better?

The color matters? I mean, Black cube has difference from the White one or White difference from Black?

Thanks.
 
Can you give me details?
why you like it? why is it better than any Type F-II or Type A-V?
Thanks.
 
I ordered the Type F-II for someone through PopBuying.com
I like it very much, but I would like to try something else.

I heard about two cubes that are very good and high level:
HaiYan Cube and the TaiYan Cube.

The HaiYan is a little bit more expensive than the taiyan.

what is better?

The color matters? I mean, Black cube has difference from the White one or White difference from Black?

Thanks.


The Haiyan really is nothing special, except of the molding quality. If you want to buy a type A i recommend A III-SV, A II, or A V, although i think Taiyan would fit you better.
 
I ordered the Type F-II for someone through PopBuying.com
I like it very much, but I would like to try something else.

I heard about two cubes that are very good and high level:
HaiYan Cube and the TaiYan Cube.

The HaiYan is a little bit more expensive than the taiyan.

what is better?

The color matters? I mean, Black cube has difference from the White one or White difference from Black?

Thanks.


The Haiyan really is nothing special, except of the molding quality. If you want to buy a type A i recommend A III-SV, A II, or A V, although i think Taiyan would fit you better.
taiyan's are great. very crispy and slightly rough, but they move wicked fast
 
I ordered the Type F-II for someone through PopBuying.com
I like it very much, but I would like to try something else.

I heard about two cubes that are very good and high level:
HaiYan Cube and the TaiYan Cube.

The HaiYan is a little bit more expensive than the taiyan.

what is better?

The color matters? I mean, Black cube has difference from the White one or White difference from Black?

Thanks.




The Haiyan really is nothing special, except of the molding quality. If you want to buy a type A i recommend A III-SV, A II, or A V, although i think Taiyan would fit you better.

Why do you think TaiYan will fit me better?
Is it worth the price? better than Ghost Hands?
 
I ordered the Type F-II for someone through PopBuying.com
I like it very much, but I would like to try something else.

I heard about two cubes that are very good and high level:
HaiYan Cube and the TaiYan Cube.

The HaiYan is a little bit more expensive than the taiyan.

what is better?

The color matters? I mean, Black cube has difference from the White one or White difference from Black?

Thanks.

Taiyan is good. Kinda like a Rubik's diy, but a little bit better. and the caps don't fall off.
Haiyan is meh. Like daniel said, it's the molding quality.

Get an A-V and sand the corners... you can find the tutorial somewhere on the forum. search it :)
 
I ordered the Type F-II for someone through PopBuying.com
I like it very much, but I would like to try something else.

I heard about two cubes that are very good and high level:
HaiYan Cube and the TaiYan Cube.

The HaiYan is a little bit more expensive than the taiyan.

what is better?

The color matters? I mean, Black cube has difference from the White one or White difference from Black?

Thanks.




The Haiyan really is nothing special, except of the molding quality. If you want to buy a type A i recommend A III-SV, A II, or A V, although i think Taiyan would fit you better.

Why do you think TaiYan will fit me better?
Is it worth the price? better than Ghost Hands?
if you have the F-ii, don't get Ghost Hand. Their similar... very very similar. Get a Taiyan, if you want to. (btw, its DAYAN, not TAIYAN)

CALL IT DAYAN PLZ!
 
I got a white DaYan from popbuying a few weeks ago, and I was quite pleased with it's performance. I like it because it doesn't pop unless you try to make it pop, and it's a pretty light cube overall. I'd recommend it. I haven't tried a Haiyan before, so I can't compare.
 
If you like type A's then go for the HaiYan but if, as you said, you like tyoe F's get a TaiYan

My point is, I never tried Type A. So i can't tell you if I like it more than Type F-II.

I ordered the Type F-II for someone through PopBuying.com
I like it very much, but I would like to try something else.

I heard about two cubes that are very good and high level:
HaiYan Cube and the TaiYan Cube.

The HaiYan is a little bit more expensive than the taiyan.

what is better?

The color matters? I mean, Black cube has difference from the White one or White difference from Black?

Thanks.

Taiyan is good. Kinda like a Rubik's diy, but a little bit better. and the caps don't fall off.
Haiyan is meh. Like daniel said, it's the molding quality.

Get an A-V and sand the corners... you can find the tutorial somewhere on the forum. search it :)

As I said before, I didn't try Type A before, only Type F-II.
I do like very smooth cube, if the Type F-II were less crispy and more smooth I was very happy.

Type A-V is smooth, but doesn't pops, cut corners and fast as the Type F-II?
(That's what I look in cube..)
 
I do like very smooth cube, if the Type F-II were less crispy and more smooth I was very happy.

Type A-V is smooth, but doesn't pops, cut corners and fast as the Type F-II?
(That's what I look in cube..)

you should've said this earlier, so we don't have to "guess" what kind of cube you like.

if you like a cube that is smooth, and fast while having good corner cutting under the minimum standard tension (i.e. the loosest you can set without popping.), then i recommend A III-SV


PS: the MST (minimum standard tension) is different from OT (optimal tension). And just to let oyu guys know, OT referrs to the tension within the OTR (optimal tension range), so it still differs slightly according to the cuber.
 
Last edited:
I do like very smooth cube, if the Type F-II were less crispy and more smooth I was very happy.

Type A-V is smooth, but doesn't pops, cut corners and fast as the Type F-II?
(That's what I look in cube..)

you should've said this earlier, so we don't have to "guess" what kind of cube you like.

if you like a cube that is smooth, and fast while having good corner cutting under the minimum standard tension (i.e. the loosest you can set without popping.), then i recommend A III-SV


PS: the MST (minimum standard tension) is different from OT (optimal tension). And just to let oyu guys know, OT referrs to the tension within the OTR (optimal tension range), so it still differs slightly according to the cuber.

Can you give me a link to A III-SV in PopBuying? What is this SV?

and why the TaiYan cube is doesn't good for me? I like the type f-II a lot

thank you guys for all the answers.
 
it might not be "bad" for you. you just might not like it, or you may have to spend some time, if you want to switch cubes. two cubes can have very different feels. like, F-II is very 'bubbly' but then type A is very different, so i'm told. (never owned or tried one.)
 
I do like very smooth cube, if the Type F-II were less crispy and more smooth I was very happy.

Type A-V is smooth, but doesn't pops, cut corners and fast as the Type F-II?
(That's what I look in cube..)

you should've said this earlier, so we don't have to "guess" what kind of cube you like.

if you like a cube that is smooth, and fast while having good corner cutting under the minimum standard tension (i.e. the loosest you can set without popping.), then i recommend A III-SV


PS: the MST (minimum standard tension) is different from OT (optimal tension). And just to let oyu guys know, OT referrs to the tension within the OTR (optimal tension range), so it still differs slightly according to the cuber.

Can you give me a link to A III-SV in PopBuying? What is this SV?

and why the TaiYan cube is doesn't good for me? I like the type f-II a lot

thank you guys for all the answers.

I'd say it's because DaYan is actually less smooth than F II. You said you wanted a smooth cube.
 
I do like very smooth cube, if the Type F-II were less crispy and more smooth I was very happy.

Type A-V is smooth, but doesn't pops, cut corners and fast as the Type F-II?
(That's what I look in cube..)

you should've said this earlier, so we don't have to "guess" what kind of cube you like.

if you like a cube that is smooth, and fast while having good corner cutting under the minimum standard tension (i.e. the loosest you can set without popping.), then i recommend A III-SV


PS: the MST (minimum standard tension) is different from OT (optimal tension). And just to let oyu guys know, OT referrs to the tension within the OTR (optimal tension range), so it still differs slightly according to the cuber.

Can you give me a link to A III-SV in PopBuying? What is this SV?

and why the TaiYan cube is doesn't good for me? I like the type f-II a lot

thank you guys for all the answers.

I'd say it's because DaYan is actually less smooth than F II. You said you wanted a smooth cube.

Suppose the smoothness is doesn't bother me and I like F-II.
Fast, Crispy, Cut Corners. The DaYan is excellent?
 
I do like very smooth cube, if the Type F-II were less crispy and more smooth I was very happy.

Type A-V is smooth, but doesn't pops, cut corners and fast as the Type F-II?
(That's what I look in cube..)

you should've said this earlier, so we don't have to "guess" what kind of cube you like.

if you like a cube that is smooth, and fast while having good corner cutting under the minimum standard tension (i.e. the loosest you can set without popping.), then i recommend A III-SV


PS: the MST (minimum standard tension) is different from OT (optimal tension). And just to let oyu guys know, OT referrs to the tension within the OTR (optimal tension range), so it still differs slightly according to the cuber.

Can you give me a link to A III-SV in PopBuying? What is this SV?

and why the TaiYan cube is doesn't good for me? I like the type f-II a lot

thank you guys for all the answers.

I'd say it's because DaYan is actually less smooth than F II. You said you wanted a smooth cube.

Suppose the smoothness is doesn't bother me and I like F-II.
Fast, Crispy, Cut Corners. The DaYan is excellent?

it will be perfect.
 
I do like very smooth cube, if the Type F-II were less crispy and more smooth I was very happy.

Type A-V is smooth, but doesn't pops, cut corners and fast as the Type F-II?
(That's what I look in cube..)

you should've said this earlier, so we don't have to "guess" what kind of cube you like.

if you like a cube that is smooth, and fast while having good corner cutting under the minimum standard tension (i.e. the loosest you can set without popping.), then i recommend A III-SV


PS: the MST (minimum standard tension) is different from OT (optimal tension). And just to let oyu guys know, OT referrs to the tension within the OTR (optimal tension range), so it still differs slightly according to the cuber.

Can you give me a link to A III-SV in PopBuying? What is this SV?

and why the TaiYan cube is doesn't good for me? I like the type f-II a lot

thank you guys for all the answers.

I'd say it's because DaYan is actually less smooth than F II. You said you wanted a smooth cube.

Suppose the smoothness is doesn't bother me and I like F-II.
Fast, Crispy, Cut Corners. The DaYan is excellent?

F-II isn't really Crispy... as compared to other cubes such as C, F-II is not crispy.
 
I do like very smooth cube, if the Type F-II were less crispy and more smooth I was very happy.

Type A-V is smooth, but doesn't pops, cut corners and fast as the Type F-II?
(That's what I look in cube..)

you should've said this earlier, so we don't have to "guess" what kind of cube you like.

if you like a cube that is smooth, and fast while having good corner cutting under the minimum standard tension (i.e. the loosest you can set without popping.), then i recommend A III-SV


PS: the MST (minimum standard tension) is different from OT (optimal tension). And just to let oyu guys know, OT referrs to the tension within the OTR (optimal tension range), so it still differs slightly according to the cuber.

Can you give me a link to A III-SV in PopBuying? What is this SV?

and why the TaiYan cube is doesn't good for me? I like the type f-II a lot

thank you guys for all the answers.

I'd say it's because DaYan is actually less smooth than F II. You said you wanted a smooth cube.

Suppose the smoothness is doesn't bother me and I like F-II.
Fast, Crispy, Cut Corners. The DaYan is excellent?

F-II isn't really Crispy... as compared to other cubes such as C, F-II is not crispy.

yeah...it's rough and unsmooth.
 
Back
Top