How to make a LanLan 2x2 not suck

DavidWoner

The Punchmaster
Joined
May 7, 2008
Messages
3,936
Location
Kansas City, MO, USA
WCA ID
2008WONE01
YouTube
Visit Channel
Yes. Not suck. It's always baffled me why LanLans out of the box are sooo bad. Since it's just an ES with springs it didn't make sense to me. Then I realized the problem is, of course, the springs. This is what LanLan springs look like:

xpdbgm.jpg


and they could not be a worse fit. The fat part at the bottom gets jammed in the bottom, slowing it down (if you try to remove one you will see what I mean). They are too long and too stiff, creating too much tension. So I replaced them with springs from ballpoint pens:

2vljejr.jpg


The red line indicates roughly where I cut it. You can see there is no fat part to get jammed, and not only is the metal slightly thinner, it is not coiled as tight, resulting in a weaker spring. You'll also notice that it is cut slightly shorter than the original spring. This is what a finished spring looks like next to a lanlan spring:

im2x51.jpg


Make sure you put them in with the flatter side down (against the center piece).

Many of you probably know that Justin and I have always shared and celebrated a mutual hatred of LanLans. However after doing this we said:

"David says:
I would imagine
that this is what everyone else THINKS a lanlan feels like.
its everything I had hoped it would be when I first ordered it"

"David says:
so now it actually feels like a springy ES
rather than a springy s***pile"

"[3:32:15 PM] Justin Jaffray: oh my god
[3:32:17 PM] Justin Jaffray: david
[3:32:24 PM] Justin Jaffray: may god have mercy on your soul
[3:32:35 PM] Justin Jaffray: for you have created something that trancends humanity"

You get the idea. Enjoy!
 
I bought 2 Lanlans and out of the box one is slow like you describe so I might mod it, however the other one is amazing...
 
I was actually planning to do the same mod, but my cubelagoon order havent arrived yet....(it's been more than 3 months)
 
I might consider this when I receive mine. It should arrive tomorrow morning or something.
 
My lanlan doesn't suck...I got like 0.5 seconds off my average (5.8 -> 5.3)

I may try this, anyway...

will it help with the "pops"? Or is that just me being too clumsy?

5.8 -> 5.3 isn't that much of a change, especially for 2x2.

And I've done about 300-400 solves with it and no pops yet, whereas it popped about 1/30-1/50 solves before.

or you can just break it in

Mine just felt worse the more I used it.

Justin and I have always shared and celebrated a mutual hatred of LanLans.

What about me?!

This is what I did to my ES, and I like it much better than my LL. I should do this.

I don't think I've ever celebrated it with you. And yeah I actually thought to myself "This is kind of like Jackson's 2x2, but much better" :p
 
Sounds good Woner, but where do you get all the ballpoint pens from? I don't really want to go out and buy 6 at 2 dollars each.

You're saying you don't already have a million of them? I'm going to raid the box of those that don't work any more. ;)

But with that said, Lanlan 2x2 works AT LEAST as well as an eastsheen. I compared them. It turns about 98% as fast, and cuts corners 150% better.

EDIT: The ES was lubed, the LL wasn't.
 
Doesn't a LanLan only have 3 springs? Mine has 3 springs. Do I have something else?

No you are correct. Faz is just being dumbfaz again.

Sounds good Woner, but where do you get all the ballpoint pens from? I don't really want to go out and buy 6 at 2 dollars each.

Well these specific ones I bought cheap a while to back use in megaminxes, but any pens will do. You only need two pens anyway, since there are 3 springs in the LL and on penspring=2 LL springs.

But with that said, Lanlan 2x2 works AT LEAST as well as an eastsheen. I compared them. It turns about 98% as fast, and cuts corners 150% better.

EDIT: The ES was lubed, the LL wasn't.

Such accurate measurements! I'm sure the process was extremely scientific, and is undoubtedly representative of every ES there is, not just the bad (probably) one that you own. Please tell me more!

PLEASE think before you make another claim like that
 
Just did the mod, and I don't like it 1 bit. Maybe it's the springs from the pen, but it feels really unstable and locks up alot. I much prefer the original lanlan - can you help me out here woner?

Want me to make a quick video to show you?

Sometimes it can't even turn.
 
Back
Top