C4U spring in C - normal or reversed?

daniel0731ex

Master
Joined
Dec 10, 2008
Messages
2,294
i decided to put my extrsa C4U ahrdware into my main cube, which is a type c, but i noticed that the spring does not go into tthe center piece as easy when i put it the normal way. but then i noticed that the bottom of the centerpiece is very thin, so if i rverse the spring it will penetrate through the plastic over time. after some close inspection i noticed that the spring does fit alll the way to the bottom of the plastic, it just simply doesn't move within the centerpiece (which is not nessesary because the spring is supposed to be staionary in the centerpiece and rubs on the screqwhead.) what should i do for my type c? i already threaded my C core with the C4U screws and could not change it back.
 
I have mine in reversed but don't have enough testing. If you are using a CII you pretty much HAVE to reverse the springs.

the threads on the C4U screw are tighter so the adjustments you make are more precise.
 
I forgot to ask, why do you need to know this in the first place? If you ask me, the springs and screws from any type can be effortlessly pwnt by Type C screws and springs. Why use C4Y?
 
I must disagree the C4U screws allow much finer adjustment and the springs have less tension which allows them to cut corners much better. this is my opinion, but cubers should try it out for themselves and see how they like it.
 
I just know that I've tried screws and springs from Type A, C, D, E, F, and C4Y in my Type Cs, and I like the Type C set the best. As always though, it's personal preference.
 
I just know that I've tried screws and springs from Type A, C, D, E, F, and C4Y in my Type Cs, and I like the Type C set the best. As always though, it's personal preference.

I'm not a big fan of the type-C core. I've had problems with them unscrewing over time, causing the cube to come loose. I once even had a centre piece come out during a pretty rough solve, leaving my sorry cube in bits all over the floor :eek: ... what I like to call a 'terminal pop' :rolleyes:

I only changed to C4U core because they seem stronger/more resilient, but that's only backed up by a couple months of testing, so could easily be wrong..
 
I just know that I've tried screws and springs from Type A, C, D, E, F, and C4Y in my Type Cs, and I like the Type C set the best. As always though, it's personal preference.

I'm not a big fan of the type-C core. I've had problems with them unscrewing over time, causing the cube to come loose. I once even had a centre piece come out during a pretty rough solve, leaving my sorry cube in bits all over the floor :eek: ... what I like to call a 'terminal pop' :rolleyes:

I only changed to C4U core because they seem stronger/more resilient, but that's only backed up by a couple months of testing, so could easily be wrong..

The bottom line is that there is no "best" setup. The best practice is to try different setups and see what works for you. That said a lot of peopel enjoy C4U hardware with Type C cubbies.
 
Back
Top