my b-day: proper cube use

panyan

Veteran
Joined
Dec 16, 2008
Messages
892
Location
London, England
notice the thread title: i was trying to get a play on words from the southpark season 5 episode: proper condom use.

ANYWAY:
I will be unwrapping a type c and c4u cube later, should :
1)i lube right away?
2) how to lube properly? and
3) how do i get perfect tension? thanks

ACTUALLY I JUST REALISED THIS IS NOT OFF-TOPIC - PLEASE MOVE TO APPROPRIATE SECTION - THANKS
 
For the type C. You just assemble like any other cube. Just spray a little lube in there and work it around. I'm assuming you use either Maplin or Tableau silicone spray. For Maplin, spray abit more in and work it around longer. If you use Tableau then you can just spray in the normal amount and work it in until it feels right. For tension, adjust the tension until it feels usable. Solve it a few times and everytime it pops, tighten it abit. Repeat.

For the C4Y cube. Assemble it and lube it like the type C. It may feel like you've tightened it all the way and it still pops like crazy but that's just because the core is unthreaded so just keep tightening. Don't use Tableau on C4Y cube. For me, it had very little effect. Use Maplin and spray in the standard amount and work it around for abit with a few solves.

Thats how I adjusted and lubed mine but I use Shock oil and Maplin silicone spray mix in my C4Y cube.

Oh and by the way...HAPPY BIRTHDAY! Haha ^^
 
Last edited:
For the type C. You just assemble like any other cube. Just spray a little lube in there and work it around. I'm assuming you use either Maplin or Tableau silicone spray. For Maplin, spray abit more in and work it around longer. If you use Tableau then you can just spray in the normal amount and work it in until it feels right. For tension, adjust the tension until it feels usable. Solve it a few times and everytime it pops, tighten it abit. Repeat.

For the C4Y cube. Assemble it and lube it like the type C. It may feel like you've tightened it all the way and it still pops like crazy but that's just because the core is unthreaded so just keep tightening. Don't use Tableau on C4Y cube. For me, it had very little effect. Use Maplin and spray in the standard amount and work it around for abit with a few solves.

Thats how I adjusted and lubed mine but I use Shock oil and Maplin silicone spray mix in my C4Y cube.

Oh and by the way...HAPPY BIRTHDAY! Haha ^^
Just spraying it in is not properly lubing, it might ruin your cube depending on the brand silicone (for example, jig-a-loo melts the cube a bit and might fuse the pieces)

answers as I know them:

Do not lube directly, solve it a lot of times so it grinds away any bad pieces.
you can try pestvic's method of breaking in if you want.

To lube, disassemble, lay out the pieces and spray a thin layer of silicone over them.
Then let it dry for ~20 minutes and assemble and do some solves.
If you want, you can take it apart after that and let it dry longer but that's not needed.

For the tension, tighten all screws about the same, then do some solves.
Hard turning, no pops: loosen a bit.
Good turning, no pops: pretty much perfect.
Good turning, pops: tighten a bit.

If it locks up a lot, try tightening it a bit more.

And of course, happy birthday!
 
Last edited:
thanks guys, the funny thing is that for greeks, june 10 is very frequent. My grandfather has his birthday today, as does my godfather. My godbrothers have theirs on the 9th and my cousin on the 11th. It is kinda wierd...

I'm assuming you use either Maplin or Tableau silicone spray.

actually i use neither, i use: 1)halfords silicone spray (own brand) 2) shock oil (20wt) 3) "berry" silicone spray my dad got from the guy who washed his car, its meant to be good for the tyres?!

To lube, disassemble, lay out the pieces and spray a think layer of silicone over them.
Then let it dry for ~20 minutes and assemble and do some solves.

thick or thin? think is kinda inbetween :p

If it locks up a lot, try tightening it a bit more.

really? i never knew that.. hmmmm
 
Last edited:
thanks guys, the funny thing is that for greeks, june 10 is very frequent. My grandfather has his birthday today, as does my godfather. My godbrothers have theirs on the 9th and my cousin on the 11th. It is kinda wierd...

I'm assuming you use either Maplin or Tableau silicone spray.

actually i use neither, i use: 1)halfords silicone spray (own brand) 2) shock oil (20wt) 3) "berry" silicone spray my dad got from the guy who washed his car, its meant to be good for the tyres?!

To lube, disassemble, lay out the pieces and spray a think layer of silicone over them.
Then let it dry for ~20 minutes and assemble and do some solves.

thick or thin? think is kinda inbetween :p

If it locks up a lot, try tightening it a bit more.

really? i never knew that.. hmmmm
I meant to say thin...
sorry for the typo (normally I read my post again to get this kind of errors out :P)
 
Back
Top