big megaminx center problem

Joined
Oct 8, 2008
Messages
99
ok so i got a megaminx and now i have a big problem.
most of the time when ever the red side is turned, so is the screw and i had like a super pop today in class, it was baddd

i sprayed crc silicone spray in the center piece hoping the screw wouldnt stay with it but that didnt work.

its a pvc megaminx if that makes any difference
 
I mad a thread with this same problem recently. Apparently buying speed screws and springs from Cube4You will fix it, if you want to pay for the shipping as well...
 
what about shaving down the center piece in the middle slightly so it doesnt catch?

EDIT

ok so i fixed it.
so what i did was i sprayed silicone spray on the screw so it made a coat of it on the threads, then i put the screw with the center in and screwed it down all the way and spun the center so it right so it tightened it down as far as it could go and did that for about a minute, and now it doesnt unscrew, hopefully this will last and if all else fails ill buy new screws, hope this helps anyone else with the same problem
 
Last edited:
ok after a few days this is good but it the screw catches every once in a while, it fell apart yesterday but a quick assembly and it was fine again, ill prolly buy some new springs and screws, anywhere to get them BESIDES cube4you or cubefans?(shipping sucks)
 
Meh, I already posted it somewhere, dunno where so I'll post this again.
This problem is easily fixed, the problems occurs on several puzzles.
I had it on pyraminx, 3x3 type D and mefferts and other megaminxes.
You can easily fix it by the following:
1. Take out the screw
2. Take normal glue (not superglue), it should be glue that leaves a bit of goo after it dries up. Mostly this is the normal household glue, I think white glue for wood also works.
3. Put a drop inside the hole where the screw goes.
4. Put the screw back

What you actually do is NOT glueing the screw in the hole but creating more friction/resistance in the screw hole, this way the screw won't twist along with countre clockwise moves anymore since it has more friction in the hole now. This also results in the fact that you can still adjust your screw afterwards.
Don't I reat don't buy new screws since you will probably have the same problem with those, plus it costs you money time and effort to buy new ones even if they would work..
 
Meh, I already posted it somewhere, dunno where so I'll post this again.
This problem is easily fixed, the problems occurs on several puzzles.
I had it on pyraminx, 3x3 type D and mefferts and other megaminxes.
You can easily fix it by the following:
1. Take out the screw
2. Take normal glue (not superglue), it should be glue that leaves a bit of goo after it dries up. Mostly this is the normal household glue, I think white glue for wood also works.
3. Put a drop inside the hole where the screw goes.
4. Put the screw back

What you actually do is NOT glueing the screw in the hole but creating more friction/resistance in the screw hole, this way the screw won't twist along with countre clockwise moves anymore since it has more friction in the hole now. This also results in the fact that you can still adjust your screw afterwards.
Don't I reat don't buy new screws since you will probably have the same problem with those, plus it costs you money time and effort to buy new ones even if they would work..

This has fixed my bright purple side, but my pink side is still loosening. Should I apply more glue? I've tried at least 5 times with this side and no good :mad:
 
Back
Top