[Review] MoYu HuaLong

How would you rate the MoYu HuaLong?


  • Total voters
    123
I got 2 sets of maru cx3 springs from cubicleus: one for yuxin, and the other is intended either for hualong or aolong.
I tried it in hualong - lost the corner cutting ability unless I set it loose. But I didn't really like this kind of looseness (not like gans 357 or yuxin loose) - its as if there is no spring in the hualong
 
I got 2 sets of maru cx3 springs from cubicleus: one for yuxin, and the other is intended either for hualong or aolong.
I tried it in hualong - lost the corner cutting ability unless I set it loose. But I didn't really like this kind of looseness (not like gans 357 or yuxin loose) - its as if there is no spring in the hualong

That's weird. I have my CX3 springs in my Hualong and I quite like the feel. It feels quite light to me and still corner cuts line to line on the other side, and three quarters reverse.
 
Exellent!

I bought this cube at amazon, it felt great, apart from corner twists(1-2 in 100 solves) this was the best cube i tried out! the problem came when i cleaned the cube out and there was no lube to put in, so all the corner cutting was gone and popping became frequent in this cube, the cube got very sandy, so i bought some lube, lubed it and now it is Perfect!
recomendation: YES! for intermediate to advanced only (i would highly suggest buying some lube for this cube if you are buying it)
 
I bought this cube at amazon, it felt great, apart from corner twists(1-2 in 100 solves) this was the best cube i tried out! the problem came when i cleaned the cube out and there was no lube to put in, so all the corner cutting was gone and popping became frequent in this cube, the cube got very sandy, so i bought some lube, lubed it and now it is Perfect!
recomendation: YES! for intermediate to advanced only (i would highly suggest buying some lube for this cube if you are buying it)

Then you should try the budget cube YJ Guanlong. I got a DIY kit so, no stickers, no lube... I mounted the cube and it was horrible, 0 corner cutting or whatever. As soon as I lubed it it works just great... for a budget cube, still not comparable to a Hualong or other premium cube.
 
I have it...The cube is awesome. Right outta the box, the cube was sooooo scratchy and dry... Personally, I don't like that sandy feeling! But after lubing, tensioning and breaking into: the result was amazing. I mean the cube cuts 60 degrees and reverse cuts almost a whole cubicle!!!! It's awesome and in my about 1000 solves, it has never popped or corner twisted, I'm by the way an 25 second solver...
 
Moyu Hualong Review

The moyu hualong is a great speedcube. This is highly recommended for cubers that are 35 seconds or below. This cube has corner twists every 50 solves or so. Pops are very rare, but when you lube and tension it, the stakes go up. Even after tensioning and lubing, though, it pops every 150 solves. You can set it up however you want, and you can make the turning speed just right. If you are sub-30, I would recommend using the cubicle.us weight 3 silicone. This cube is smooth when you turn it fast, but when you turn is slowly, you can feel small bumps, which have never been a problem for me. It hardly ever locks up, and when it does, it is barely noticeable. Corner cutting is around 45 degrees, and reverse is about one piece. The shades are perfect for me, and I know for many other people, too. I would reccomend this cube to anyone who is 15 seconds or above. This cube has great plastic, so it is not wobbly or fragile. It really is worth the price of $16 on the cubicle.us. That is my favorite cubing store with great prices, and free shipping for orders over ten dollars. The normal shipping is 2-5 days. You can speed it up by paying a few extra dollars, but even after that, the prices are great. You can also get 5% off of all purchases with certain discount codes. So, I do highly recommend this cube.


-ScrambledCuber
 
Moyu Hualong Review

The moyu hualong is a great speedcube. This is highly recommended for cubers that are 35 seconds or below. This cube has corner twists every 50 solves or so. Pops are very rare, but when you lube and tension it, the stakes go up. Even after tensioning and lubing, though, it pops every 150 solves. You can set it up however you want, and you can make the turning speed just right. If you are sub-30, I would recommend using the cubicle.us weight 3 silicone. This cube is smooth when you turn it fast, but when you turn is slowly, you can feel small bumps, which have never been a problem for me. It hardly ever locks up, and when it does, it is barely noticeable. Corner cutting is around 45 degrees, and reverse is about one piece. The shades are perfect for me, and I know for many other people, too. I would reccomend this cube to anyone who is 15 seconds or above. This cube has great plastic, so it is not wobbly or fragile. It really is worth the price of $16 on the cubicle.us. That is my favorite cubing store with great prices, and free shipping for orders over ten dollars. The normal shipping is 2-5 days. You can speed it up by paying a few extra dollars, but even after that, the prices are great. You can also get 5% off of all purchases with certain discount codes. So, I do highly recommend this cube. If you liked this review, I also have a YouTube channel, so please subscribe to that.


-ScrambledCuber
 
Is there anyone else here who had this cube and found it got bad and sluggisg after a few months of breaking it in? Or am I just really really bad at maintaining cubes? It's probably the second one because a couple years ago the same thing haplened to my zhanchi but im just wondering.
 
Is there anyone else here who had this cube and found it got bad and sluggisg after a few months of breaking it in? Or am I just really really bad at maintaining cubes? It's probably the second one because a couple years ago the same thing haplened to my zhanchi but im just wondering.
Did you disassemble and clean your cube?
 
I recently lubed it with 10K, and it gets a bit sluggish.
Worked it thro, and its now better. So, its probably your 50k lube...may help if you loosen it or clean out the lube
[fast without lube, but the turning then feels like rough]
 
Today, when lots have great cubes have come out, is it still a good idea to get this cube?

Or should I just stick with my Gans 356

Guoguan Yuexiao feels like an upgraded version of Hualong. Yuexiao has similar feel as Hualong, cuts a bit better, and has no corner-twisting and popping problem that Hualong might have at loose tension.

If you plan to get Yuexiao and you have no problem with the green side being too light, I'd recommend the stickerless version as it's lighter, and I feel the plastic is softer so the cube feels more smooth.
 
This is the review thread for the moyu hualong. Please review only if you have got the cube or tried it out. This is the most recent moyu cube. Any thoughts about it?
Where did you buy the puzzle? Local toy shop
When did you buy the puzzle? Yesterday
Turning speed? (Is it just right? Too fast and uncontrollable?) Out of the box it was too fast and uncontrollable but after doing a few hundred solves it feels just right without extra lubrication and tensioning.
What do you think about the feel of the cube? (smooth/dry/crisp/airy/etc.) Crispy and smooth
Overall corner cutting? 35 degrees, reverse 20 degrees
Locks or pops? Rarely locks up, never popped
Does it corner twist? Never
Does it feel cheap? (as in the feeling where the puzzle seems to want to fall apart) No
Stickers and shades? Standard Moyu shades, but the orange is slightly brighter than my Weilong GTS
Whom would you recommend it to? Speedcubers who have fast and/or aggresive turning style and OH cubers.
Is it worth the price? Definitely.
Additional comments: I bought a Weilong GTS last year and at first it felt OP compared to my Rubik's Cube V2 but then I later found out it did worse than my friend's Hualong in corner cutting (like maybe even only half). The Weilong GTS was too slow for me (default tensions), when I did F2Ls real fast, the edges pop, if I turn too hard, it corner twists. Also, when I did OH solves on it, I had a hard time doing R' (I'm OH left-handed). I had to push down my pinky real hard to make the R face move and when it did, it overshot and would lock up because of its bad corner cutting.

I came across a toy shop yesterday and bought it for $19. It was too fast for me right out of the box and I kept overshooting. I was about to change the tensions when I thought that I should break it in first before changing the tensions.

After doing a few hundred solves on the cube, I could control the cube and it felt perfect for my extremely fast and aggressive turning style. It corner cut VERY WELL, it NEVER corner twists or POPS at all. It also rarely ever locks up (Once in 50 solves). I put the Hualong and the Weilong GTS side-by-side and to my surprise, the Hualong was actually slightly smaller than the Weilong GTS although their dimensions should be 57mm x 57mm x 57mm and 56.5mm x 56.5mm x 56.5mm respectively.

To me, this cube is perfect for OH solving. It is slightly smaller than most cubes which makes it easier for my pinky to reach the R face and I can do the trigger R U R' U' with ease using this cube.

Also, I noticed that this cube's stickers are slightly thicker than the Weilong GTS (I can see the sticker colors from the side), a brighter shade and also of higher quality.

In conclusion, I believe that this cube is very worth its price because it corner cuts very well, never corner twists and pops and rarely locks up. I would recommend it to cubers with fast and/or agressive turning style and OH cubers.
 
lol indeed. Hualong was my first nice speedcube after Dayan and I liked it a lot. But now I definitely wouldn't use it. As for OH, my favorite is Gans Air as it's lighter and quite stable.
 
lol indeed. Hualong was my first nice speedcube after Dayan and I liked it a lot. But now I definitely wouldn't use it. As for OH, my favorite is Gans Air as it's lighter and quite stable.
I agree. It's lighter so your hand would take less weight and it's also more controllable. However, even though it is extremely worth the price, it's quite expensive.
 
"This is the review thread for the moyu hualong. Please review only if you have got the cube or tried it out. This is the most recent moyu cube. Any thoughts about it?" I'm not an idiot. I know it's not the newest cube. Does it seem like I started this thread? Have you even looked at the first post? I bought my Weilong GTS because it was the newest and I wasn't satisfied with it. So I bought this cube. That's it! All because of my join date don't think I'm the noob who gets whatever cube he sees in a toy shop and claims it's the newest. Don't criticise and try to find fault in others before looking properly.
 
Back
Top