Trouble reassembling Eastsheen 4x4x4

[AndyRoo789]

I've got all the pieces in, except the last 4 pieces that connect to the center caps.

When i try to push them in, it wrecks everything else.

Heeeeelllppp!!

 

[rahulkadukar]

Use Youtube

 

[LNZ]

Your Eatsheen should come with an instruction sheet on how to assemble and take it apart. Putting in the last pieces is hard. But try this. Put sticky tape all around on the all ready three assembled layers and try again on the last layer. Then when the job is done, remove the sticky tape.

 

[bwatkins]

Your Eatsheen should come with an instruction sheet on how to assemble and take it apart. Putting in the last pieces is hard. But try this. Put sticky tape all around on the all ready three assembled layers and try again on the last layer. Then when the job is done, remove the sticky tape.

I bought mine from huskyomega, and they didnt come with instructions, but i use a similar method, i would put some books or something on all 4 sides to keep it square while i inserted the final pieces, that only happened to me once though...good luck!

 

[Ethan Rosen]

This may help you get the idea of what to do

 

[elcarc]

http://lmgtfy.com/?q=assemble+eastsheen+4x4

use that

 

[DevenNadudvari]

Unscrew the center thing and then put them in

 

[Thomas09]

When my ES 4x4 first exploded, it was only the last layer luckily. But what I did was put in an edge set including the inside edge piece in, then the corners next to it, and did it all around the cube. Then I dropped in those pegs that connect to the centre caps. Then, I put in those hooks that should go in between the spaces of the pegs. I then put on the cap and screw and the centre caps on.

Hope I helped and sorry I couldn't use pictures.

 

[ShortRubiksFreak]

Eastsheen Reassemble fun

you'll have to actually unscrew it and take the tops off the center pieces. it looks difficult but its actually not too bad. i freaked out the first time but with this video i managed to get it back. you'll need a good screwdriver and make sure you make it really tight when its back together. Oh and please dont let any pieces fall down, put it back together and wonder why one side doesnt turn. VERY dissapointing. Good luck!


http://www.youtube.com/watch?v=Pi1xMa_eQNM