The lengths you go to to lubricate your cube

Kabuthunk

Regular
Joined
Feb 25, 2010
Messages
47
Location
Winnipeg, MB
YouTube
Visit Channel
I'm just curious as to the processes that people go to in order to lubricate their cubes. Being new to this as a whole, I followed a youtube instructional type video (http://www.youtube.com/watch?v=yHEbHWD8Z_8 for the sanding, http://www.youtube.com/watch?v=4__-eRccGHU for the lubing) on my store-bought cube, which worked quite nicely.

Now, not being a speed-cuber (although that being the end result of my fascination would be kinda nice), I like the cube to be fairly solid (toyed with various degrees of looseness with a DIY cube, see below, decided I liked it more 'firm'), however I still like it to be able to rotate smoothly. So, I decided to amp up the complete lubrication/smoothing for the white DIY cube I got from the Rubik's site.


By the way, I've been told that I'm probably somewhat OCD, so that may account for the following.


So what I did when said DIY cube arrived was to meticulously sand down any bumps from the injection-mould edges or injection site with a metal file (pretty much identical to the one in that first video above). Then, I went over any of my filed spots with 600 grit sandpaper, so that I could smooth away any ridge or bump that my fingers could perceive. THEN, I went over all the sanded spots with a 1500 grit sandpaper to polish it as smooth as possible (if you're familiar with grit levels, that's starting to get up there towards the point of polishing more than anything else). At this point, my fingertips could barely, barely feel any difference between original untouched plastic and the sanded portion.

Then, after attaching the stickers (didn't know if lube first would make them stick less, but I can't imagine it would do anything other than just that) I did pretty much identical lubing to the second youtube video posted above (disassemble, spray all contact sides with silicone lubricant).


At this point, I'm not entirely sure how to describe how smooth it feels rotating it, but the best thing I can come up with is... imagine you're running your hands over a glassy smooth sheet of ice. That's what it feels like turning it. It feels like it only has the barest minimum of touch with any other sides or something. Cutting corners also works fairly well (not that I need to do that really, me only being able to solve it in multiple minutes with my own method which I imagine is similar to a beginner method), and yeah... love it :D.


So... tl;dr: I put like... 12 or so hours of work into sanding/lubing the cube, because I'm obsessive like that. What do you guys to do smooth up a new cube's rotating?
 
I'm just curious as to the processes that people go to in order to lubricate their cubes.

Wow, sounds like you've put a lot of effort into your cube.

I remember when I got my first Chinese DIY (a black type-A) I did something similar. Using graded sandpaper to progressively sand the inner edges into a more rounded shape. It turned out to to make the cube horribly unstable and I ended up giving it away.

These days I don't go to huge lengths to make a new cube better. The only form of 'sanding' they get is about a weeks rough solving without lube to break them in. It usually removes any imperfections fairly well, and after lubing leaves the cube feeling pretty smooth. I've found that some cubes respond very well to a long period of break in. My main type-C (about 6 months old) feels really nice and smooth now.

I'm not sure that sanding my type C would have had the same effect though. I think breaking in probably causes the inner pieces to wear down in the places which matter. For example, the inner lip on edges end up with a curve which very closely matches the curvature of the centre pieces holding them in, helping them to glide smoothly over them without catching. By manually sanding a cube its going to be difficult to recreate the same wear patterns.

Anyway, if you can apply the same obsession to your cubing you're sure to get very fast ;)
 
I remember when I got my first Chinese DIY (a black type-A) I did something similar. Using graded sandpaper to progressively sand the inner edges into a more rounded shape. It turned out to to make the cube horribly unstable and I ended up giving it away.

Yeah, I didn't round any of the cubies themselves... just smoothed the sides, and on the corner pieces, somewhat rounded out the sides of the inner jut that holds it into the cube (originally, it's almost more like a curve made up from three straight lines at say... 20 degree angle corners or whatever. I turned that round. Works awesome :D).

Mental note though if I should ever have the urge to try rounding the cubies themselves though... bad idea.
 
Back
Top