Kabuthunk
Regular
I'm just curious as to the processes that people go to in order to lubricate their cubes. Being new to this as a whole, I followed a youtube instructional type video (http://www.youtube.com/watch?v=yHEbHWD8Z_8 for the sanding, http://www.youtube.com/watch?v=4__-eRccGHU for the lubing) on my store-bought cube, which worked quite nicely.
Now, not being a speed-cuber (although that being the end result of my fascination would be kinda nice), I like the cube to be fairly solid (toyed with various degrees of looseness with a DIY cube, see below, decided I liked it more 'firm'), however I still like it to be able to rotate smoothly. So, I decided to amp up the complete lubrication/smoothing for the white DIY cube I got from the Rubik's site.
By the way, I've been told that I'm probably somewhat OCD, so that may account for the following.
So what I did when said DIY cube arrived was to meticulously sand down any bumps from the injection-mould edges or injection site with a metal file (pretty much identical to the one in that first video above). Then, I went over any of my filed spots with 600 grit sandpaper, so that I could smooth away any ridge or bump that my fingers could perceive. THEN, I went over all the sanded spots with a 1500 grit sandpaper to polish it as smooth as possible (if you're familiar with grit levels, that's starting to get up there towards the point of polishing more than anything else). At this point, my fingertips could barely, barely feel any difference between original untouched plastic and the sanded portion.
Then, after attaching the stickers (didn't know if lube first would make them stick less, but I can't imagine it would do anything other than just that) I did pretty much identical lubing to the second youtube video posted above (disassemble, spray all contact sides with silicone lubricant).
At this point, I'm not entirely sure how to describe how smooth it feels rotating it, but the best thing I can come up with is... imagine you're running your hands over a glassy smooth sheet of ice. That's what it feels like turning it. It feels like it only has the barest minimum of touch with any other sides or something. Cutting corners also works fairly well (not that I need to do that really, me only being able to solve it in multiple minutes with my own method which I imagine is similar to a beginner method), and yeah... love it
.
So... tl;dr: I put like... 12 or so hours of work into sanding/lubing the cube, because I'm obsessive like that. What do you guys to do smooth up a new cube's rotating?
Now, not being a speed-cuber (although that being the end result of my fascination would be kinda nice), I like the cube to be fairly solid (toyed with various degrees of looseness with a DIY cube, see below, decided I liked it more 'firm'), however I still like it to be able to rotate smoothly. So, I decided to amp up the complete lubrication/smoothing for the white DIY cube I got from the Rubik's site.
By the way, I've been told that I'm probably somewhat OCD, so that may account for the following.
So what I did when said DIY cube arrived was to meticulously sand down any bumps from the injection-mould edges or injection site with a metal file (pretty much identical to the one in that first video above). Then, I went over any of my filed spots with 600 grit sandpaper, so that I could smooth away any ridge or bump that my fingers could perceive. THEN, I went over all the sanded spots with a 1500 grit sandpaper to polish it as smooth as possible (if you're familiar with grit levels, that's starting to get up there towards the point of polishing more than anything else). At this point, my fingertips could barely, barely feel any difference between original untouched plastic and the sanded portion.
Then, after attaching the stickers (didn't know if lube first would make them stick less, but I can't imagine it would do anything other than just that) I did pretty much identical lubing to the second youtube video posted above (disassemble, spray all contact sides with silicone lubricant).
At this point, I'm not entirely sure how to describe how smooth it feels rotating it, but the best thing I can come up with is... imagine you're running your hands over a glassy smooth sheet of ice. That's what it feels like turning it. It feels like it only has the barest minimum of touch with any other sides or something. Cutting corners also works fairly well (not that I need to do that really, me only being able to solve it in multiple minutes with my own method which I imagine is similar to a beginner method), and yeah... love it
So... tl;dr: I put like... 12 or so hours of work into sanding/lubing the cube, because I'm obsessive like that. What do you guys to do smooth up a new cube's rotating?