Silicone problem

f2lftw

Member
Joined
Mar 16, 2009
Messages
9
I have recently bought a new DIY cube (my first 1 :P) and was amazed on the speed and wanted my rubik's brand cube to go as fast as it. So i went up to the local store and bought myself some silicone spray . as i prized apart my cube i sprayed twice in the core then worked it round for about 5 minutes after.

My cube has gotmuchslower for some reason and is unbearable to turn any help here ??:confused:
 
na in england they dont have that . it was 3 in 1 professional silicone spray
 
Also, take the pieces out and wipe all the dust and grime off the little cubies and spindle. Then put it back and apply lube. If it is a store bought cube, you will need to wear it in for a few weeks. It wears down quicker if it is unlubed.
 
The 3 in 1 stuff takes forever to dry and while it's wet it does slow your cube down. It'll be better when it dries but you can speed this up by wiping off the excess. Best way I found of using it was to spray it on a bit of kitchen roll then wipe the cubies down with it.

As alternatives, Tableau Dry Lube Silicon Lubricant is excellent and available in the uk (I got mine on ebay), Maplin's Silicone Grease with PTFE also often gets recommended but not tried it myself.
 
3 in 1 is ok but it takes forever to take effect. I recommend using a hair dryer and drying it and then wiping off excess. I am also from UK, Tableau and maplin silicone spray are good. I own 3 in 1, maplin and tableau...I have also recently tested out shock oil 20 wt. Overall opinion: Shock oil beats them all. Personally, I'd go for maplin silicone spray because its easily available.

Edit: I wouldn't recommend spraying silicone spray directly onto the core, it can damage the screws and springs, just spray the pieces.
 
Anyone tried the CRC Power Lube? Im using it and i'm making a review on it.
It is smooth but it smells a little.. And it needs some time to evaporate..
It works well on DIYs but on storebought, it sucked alot..

And i have a question here, is most of the lubricant will make the cube stiffer at first?
 
Back
Top