original square-1

AlanAlanine

Regular
Joined
Oct 10, 2008
Messages
105
so i have a square-1 from like 10 years ago (the kind that says square-1 on it)

someone told me it has a screw in it. does that mean I can adjust it if I take it apart?

or should I just lube it. (i don't want to take it apart if I can't adjust tension)
 
Yes, you can adjust tension. The hard part is getting off the caps. They're probably glued on, but usually can still be pried off with a bit of effort.
 
It took me 2 and a half hours to open mine, mostly because I guessed the side wrong. Try the cap that doesn't say Square-1, my screw was under there, although I can't say for sure that yours will be the same. They are glued very tight, I had to pop out 2 edges just to be able to cut all the glue. Also, there are little plastic rods attached to the center that are fused to the cap. They are non-essential, but you will have to break them open it. If you can get a screwdriver in the gap, just pry with a lot of force and the first one will snap, then push the screw driver in further and pry again to break the second. It will be very loud and it will definitely feel like you are damaging the puzzle, but its okay.
 
My square-1s (i have 2) are very cheap (got them for 2 USD) and the screw is not adjustable. Instead, since it is very easy to pull in and out, I just have to pull both halves apart. If I pull it too much apart by accident, I can easily pull off the cap.
 
This isn't exactly related, but I got a square-1 from meritline, and I tried to pry off one of the center caps, but it seemed that something broke on it and one side of it started to come loose. Does this mean I broke a peg? If so, do I just glue it back on and not take it apart, or can I continue to take it apart with, say, and exacto knife?

EDIT: Yes, one of the pegs is broken. I tried pulling a center off with an exacto knife, and I got a bit done when I saw the broken peg.
 
Last edited:
This isn't exactly related, but I got a square-1 from meritline, and I tried to pry off one of the center caps, but it seemed that something broke on it and one side of it started to come loose. Does this mean I broke a peg? If so, do I just glue it back on and not take it apart, or can I continue to take it apart with, say, and exacto knife?

EDIT: Yes, one of the pegs is broken. I tried pulling a center off with an exacto knife, and I got a bit done when I saw the broken peg.

One of my pegs broke too. It is stuck in its hole.
 
One of my pegs broke too. It is stuck in its hole.

Right, that's what happened to mine. But now I can't get the other peg out of its hole because I'm afraid that I'll break it.

Should I continue?

EDIT: Well I got that cap off and learned that it's the wrong cap. BLAH. And I've already broken the edge off of my other cap in one place, and it's about to break in another place. Why are there no youtube videos of how to take apart an OLD square 1?
 
Last edited:
One of my pegs broke too. It is stuck in its hole.

Right, that's what happened to mine. But now I can't get the other peg out of its hole because I'm afraid that I'll break it.

Should I continue?

EDIT: Well I got that cap off and learned that it's the wrong cap. BLAH. And I've already broken the edge off of my other cap in one place, and it's about to break in another place. Why are there no youtube videos of how to take apart an OLD square 1?

Well the pegs serve no purpose other than to seal the sq1, so breaking them is not big deal as long as you dont damage the actual cap. There is no way to open a square-1 brand without breaking the pegs.
 
I had 2 originals (bought them from Toys R' Us when I was a kid, my first puzzles ever), but gave one to a good friend. With a tiny bit of lube, mine became a very nice puzzle. I don't think messing with the screws is necessary. Solve it a bunch, then lube it and solve more, and you'll be fine.
 
I had 2 originals (bought them from Toys R' Us when I was a kid, my first puzzles ever), but gave one to a good friend. With a tiny bit of lube, mine became a very nice puzzle. I don't think messing with the screws is necessary. Solve it a bunch, then lube it and solve more, and you'll be fine.

You dont understand how tight mine was. My hands were in pain after 5 or so solves. Also, once I popped an edge out there was no turning back. There was no physical way that edge would go back in without loosening.

Mine actually belongs to a friend, who got it as a gift a few years back.
 
Original squares-1 are pretty easy to find, honestly. I know quite a few non-puzzlers that have one sitting in a box somewhere from "back in the day"
 
Back
Top