Lubing my cube

keityo

Member
Joined
Nov 14, 2009
Messages
5
Hello everyone! I used CRC Heavy Duty Silicone, and my 3x3 Type a DIY cube turns nicely. After a few days, I popped off an edge piece and it was yellow on the inside. Is it possible that the lube melted the core onto the cube pieces? Is there a "proper" way to lube my cube? All I did was take out a piece and sprayed the insides using the straw, and then turning the pieces to spread the lube. Thanks.
 
Yeah, that is a slight possibility.
Something similar happened to me to a small extent.

You're doing it fine.
No real problem there.
 
Ok. It just looks yellow on the inside, and the CRC can says that it corrodes plastic. I used it because everyone else pretty much uses it. Is taking the pieces out, spraying them, letting them dry, and reassembling better?
 
There are many different views on this particular subject, but I always find that taking the cube apart and spraying it lightly twice (let it dry, then do it again) works best. I don't ever spray into the cube.
 
Well apparantly CRC Heavy Duty Silicone now contains ACETONE which eats plastic for breakfast:

http://www.silicongrease.com/deals/...one-multi-use-lubricant---75-wt-oz-B000BXKZUG

http://www.thumpertalk.com/forum/archive/index.php/t-749932.html

There seems to be 3 types of this "Heavy Duty Silicone". One is discontinued (prolly the good stuff)

1)
Wood, plastic, metal and rubber surfaces. Use in moist and harsh environments. Not for use as an appearance cleaner or on paint.
http://www.crcindustries.com/hd/content/prod_detail.aspx?PN=05074CA&S=Y (discontinued)
http://www.crcindustries.com/faxdocs/msds/50741.pdf

2)
Wood, plastic, metal and rubber surfaces. Use in moist and harsh environments. Not for use as an appearance cleaner or on paint.
http://www.crcindustries.com/hd/content/prod_detail.aspx?PN=05174&S=Y (available 1)
http://www.crcindustries.com/faxdocs/msds/5074.pdf

3)
Wood, metal and rubber surfaces. Use in moist and harsh environments. Not for use as an appearance cleaner or on paint.
http://www.crcindustries.com/hd/content/prod_detail.aspx?PN=05074&S=Y (available 2, notices it doesn't mention plastics)
http://www.crcindustries.com/faxdocs/msds/5074.pdf (same MSDS as the one above)
 
Last edited:
Back
Top