Inside a Stackmat

Did you tune the input volume in your computers mixer?

If that does not work (or you tried it already), then try to write to stackmat and ask for a flowchart (usally all component values are explicity written in those), they may be kind and send one to you.
 
Last edited:
Did you tune the input volume in your computers mixer?

If that does not work (or you tried it already), then try to write to stackmat and ask for a flowchart (usally all component values are explicity written in those), they may be kind and send one to you.

What do you mean by tune the input volume in my computers mixer?

Sure I'll try asking stackmat for the flowchart.
 
He means adjusting the volume of that jack you plugged it into. Like when you plug in your microphone you can adjust the sensitivity of it in the sound control panel. Don't forget that you can change the value in CCT from 50 to something close to 50. I was having a problem where my stackmat would keep repeating the same time I just got, so I changed it to 53 and it cleared it up.
 
He means adjusting the volume of that jack you plugged it into. Like when you plug in your microphone you can adjust the sensitivity of it in the sound control panel. Don't forget that you can change the value in CCT from 50 to something close to 50. I was having a problem where my stackmat would keep repeating the same time I just got, so I changed it to 53 and it cleared it up.

Could you tell me how to get to the adjustment thing on cct, my mic is turned all the way up, so my computer should be able to pick it up just fine. I even did a test to make sure it was picking up sound.
 
So I still can't figure out why my timer won't work anymore, my computer picks up the sound just fine and I can hear the sound that it's supposed to make when I hook it up to my speakers. Also, I contacted the stackmat company, but they won't give me any information on the circuit board because it's "classified information" blah blah blah. Any suggestions?

SN: I tried putting some pictures on here, but I have to put a link to it or something? I couldn't figure it out. Could someone maybe post the pics up for me of my stackmat? If so contact me somehow and I will send you the pictures.

Quick recap: It worked for a day then cct wouldn't recognize the timer anymore, not sure why, sadly speedstacks wouldn't help us out.
 
OK so my timer stopped working because I had it on the wrong setting this whole time :P

But I still can't figure out why the random times show up. I tried setting the value from 50 to something else, I tried all kind of stuff I even put it down to one, but it won't stop. Any suggestions?
 
Here is a link to the video of the picture I took and my timer actually working.
 
Last edited by a moderator:
Hey guys I just made a new tutorial of my stackmat mod describing what I did with a custom made macro lens for my flip ultra hd camera. I need to finish editing it then I will post a link here of the video, stay tuned!
 
Ok so here is another tutorial, I show the glitch at the very end at 8:30 in the video. If anyone knows how I could get rid of this problem please help. v=M31Sq_psqwA
 
Last edited by a moderator:
I haven't watched it all yet (had to go off and do something), but the "Buzz" setting you are talking about is the setting used to check diodes. It is often shown as a symbol with a diode and a dot with the 3 volume semi-circle type things that gradually get larger (like parenthesis).

http://www.generaltools.com/images/instruments/DMM333-XL.jpg To the bottom left of the round "Shift" button.
 
Haha thanks for replying, I thought i'd post the vids up here just incase someone came across a solution.
Here you are posting time after time and nobody notice :D

I will watch you vids later, I tried now but had bad lags :(
 
Thanks, I didn't know that, at the end of the video I show the "bug" in the mod, any ideas?
I haven't watched it all yet (had to go off and do something), but the "Buzz" setting you are talking about is the setting used to check diodes. It is often shown as a symbol with a diode and a dot with the 3 volume semi-circle type things that gradually get larger (like parenthesis).

http://www.generaltools.com/images/instruments/DMM333-XL.jpg To the bottom left of the round "Shift" button.
 
Sorry to take this long to get back to you :P If you got o your CCT options, specifically the stackmat timer options, you'll see a value (default is 50) that you can change. Change your value to 51, 49, etc. Keep changing it until it stops. I had to set mine at 53. The same thing happened to me (except I also had it where it would repeat the time I stopped on multiple times) until I changed this value.

File -> Configuration -> 4. Stackmat Settings -> Set Stackmat Value
 
What does this value actually do? I even put it down all the way to 1 and nothing happened. I'll try doing all the different values and see if anything happens. Thanks for the help btw!
Sorry to take this long to get back to you :P If you got o your CCT options, specifically the stackmat timer options, you'll see a value (default is 50) that you can change. Change your value to 51, 49, etc. Keep changing it until it stops. I had to set mine at 53. The same thing happened to me (except I also had it where it would repeat the time I stopped on multiple times) until I changed this value.

File -> Configuration -> 4. Stackmat Settings -> Set Stackmat Value
 
Like I said, try to keep it around 50 (that's what it says in the documentation, anyhow). Did you try it at 51/52/53? Or 49/48/47? I'm not quite sure what it does, to be honest. You might ask Lucas Garron, I know he currently maintains the project. You might also ask Walter Sousa (might have spelled his name wrong, owner of Prisma Puzzle Timer), as he has included stackmat compatibility in his project.
 
Usually these kind of time issues come from an iffy signal coming into CCT. Check the gain on your line/mic in and make sure you are getting a good level for the stackmat. The stackmat value really doesn't need to be changed.

Also, Lucas only hosts the cct site on garron.us. He doesn't actually maintain any of the code.
 
Thanks for the clarification, Dan. Was he the one to last update it from 0.9.3 to 0.9.5?

I didn't check gain on my line in setting when I changed the value, but it worked for me. When I get back I'll check the signal level and see if I can go back down to 50 and clean up the signal a bit.
 
How do I change the gain value? Is it in the mixer settings? I'll try to figure it out and update here. Thanks for the help Dan.
Usually these kind of time issues come from an iffy signal coming into CCT. Check the gain on your line/mic in and make sure you are getting a good level for the stackmat. The stackmat value really doesn't need to be changed.

Also, Lucas only hosts the cct site on garron.us. He doesn't actually maintain any of the code.
 
Back
Top