GuHong issue

kpcube

Regular
Joined
Sep 19, 2010
Messages
152
okay so I just got a GuHong a few days okay and i love but it has a strange problem and i wondered if it was normal. I set my tensions fairly loose but not terrible and it seems like every so often when i ramp up the tps a center will just unscrew itself and an entire layer will just fall to the floor.... Granted my tensions are a little looser then usual as I have not be able to lube it yet need to get some but still...... Anyway normal or not?
 
It isnt normal that your entire center unscrews... You might disassemble it entirely including the screws and springs. Clean everything out and put it back together. If this doesn't help your core or one of your screws is broken. If that is the case you need to replace the broken part with a different core or screw. I might is the case as Ukspeedcuber said that your tension are too loose tighten it and look if it happens again. Hope I helped you out
 
Haha, mine did that when I swapped cores. The main reason this happened was because I was forcing the corners too much which gave the core too much pressure to handle. I suggest either tightening the screws down or get a different core.

Also, LUBE IT!! It makes a difference.
 
well i know that some cube have qwirks F2 or the rubil's DIY and caps for example so i just wondered if it was something like that. thanks
 
I exchanged it with my Av core for the time being, (lost a washer), and it's much better actually. However when I get back to college I will be reassembling my Av as the replacent parts I need will be there so I will grab another core thanks.
 
I exchanged it with my Av core for the time being, (lost a washer), and it's much better actually. However when I get back to college I will be reassembling my Av as the replacent parts I need will be there so I will grab another core thanks.

the Guhong or the A-V?. you need a washer unless you want your center busted and can't be fixed :D

btw, thanks for noticing my post (if you did) and getting an A-1 Core :)
 
Sorry ment to clairfy and forgot.... The A-V is missing the washer, replacement parts are up at school like i said just have to wait till i go back then i can reassemble it.

edit: and yes i did notice thank you
 
Last edited:
Ofcourse it's not normal, would you class a cube falling apart as normal? -.-'

Just make the tensions tighter...
:fp

OT: Dayan's cores seem to strip sometimes, so if you turn counterclockwise, it will actually unscrew.... so try to replace the core or ask dayan for a new core.. :)
 
:fp

OT: Dayan's cores seem to strip sometimes, so if you turn counterclockwise, it will actually unscrew.... so try to replace the core or ask dayan for a new core.. :)

haha so mean but yeah ordered an A-1 core as suggested so for now we wait. thanks
 
Back
Top