MrRubiksUFO
Regular
As I have read a lot things about this cube, I decided to make a review of mine and to clear up some things (I hope i can).
First of all, in my opinion there are good and bad Mini Dayans (that's how I will call it now). I don't know what makes the bad ones bad and the good ones good, it seems to be just like with V-Cubes; there are big quality differences, too.
To difference between good and bad Mini Dayans, it would be good if you could test some out. I once had one which I actually could not turn (nothing) until I put some Maru in. When I got my new one, I could turn the outer layers without any lubing and they were already a little bit smooth. Those Mini Dayans seem to be the ones which can become quite good.
My review is about one of these, a black Mini Dayan. I did a little modification to it: I replaced the springs with Shengshou 6x6 springs with the result of better cornercutting. My cube is lubed with lubix (for the core) and with maru (for the pieces).
Speed:
The inner layers are pretty fast, but you can still control them well (this is another result of changing the springs). The outer layers are slower, but still fast enough to do fingertricks and to turn quite fast.
Innerlayers get 9/10, the outer layers 7/10.
Cornercutting:
The cornercutting of this 4x4 is also nice. It isn't as good as the my big Dayan, but it cuts almost a piece (outer layers) and 1 piece for the inner layer.
It gets 8/10.
Lock-Ups:
The inner layers of my cube never lock up because of the great cornercutting and the control you get when you turn. The outer layers lock up a lot more, mostly when you turn to fast. But as the corner cutting was increased here, it isn't too bad at all.
Inner layers get 9/10, outer layers 6/10.
Pops:
My cube sometimes pops. It doesn't explode, only one edge comes out. My cube is set on a quite loose tension, so I think with adjusting it could be improved. But I like my cube at this tension, so I won't change it.
It gets 7/10, because it doesn't happen too often, and it doesn't fall apart when it pops.
Overall, this is a nice cube, not my main (this is the Big Dayan), but i like it to play around with it. For cubers with a calm turning style it could be nice.
From me it gets 8/10 points.
I hope I could help you a little with this cube. It isn't bad at all.
First of all, in my opinion there are good and bad Mini Dayans (that's how I will call it now). I don't know what makes the bad ones bad and the good ones good, it seems to be just like with V-Cubes; there are big quality differences, too.
To difference between good and bad Mini Dayans, it would be good if you could test some out. I once had one which I actually could not turn (nothing) until I put some Maru in. When I got my new one, I could turn the outer layers without any lubing and they were already a little bit smooth. Those Mini Dayans seem to be the ones which can become quite good.
My review is about one of these, a black Mini Dayan. I did a little modification to it: I replaced the springs with Shengshou 6x6 springs with the result of better cornercutting. My cube is lubed with lubix (for the core) and with maru (for the pieces).
Speed:
The inner layers are pretty fast, but you can still control them well (this is another result of changing the springs). The outer layers are slower, but still fast enough to do fingertricks and to turn quite fast.
Innerlayers get 9/10, the outer layers 7/10.
Cornercutting:
The cornercutting of this 4x4 is also nice. It isn't as good as the my big Dayan, but it cuts almost a piece (outer layers) and 1 piece for the inner layer.
It gets 8/10.
Lock-Ups:
The inner layers of my cube never lock up because of the great cornercutting and the control you get when you turn. The outer layers lock up a lot more, mostly when you turn to fast. But as the corner cutting was increased here, it isn't too bad at all.
Inner layers get 9/10, outer layers 6/10.
Pops:
My cube sometimes pops. It doesn't explode, only one edge comes out. My cube is set on a quite loose tension, so I think with adjusting it could be improved. But I like my cube at this tension, so I won't change it.
It gets 7/10, because it doesn't happen too often, and it doesn't fall apart when it pops.
Overall, this is a nice cube, not my main (this is the Big Dayan), but i like it to play around with it. For cubers with a calm turning style it could be nice.
From me it gets 8/10 points.
I hope I could help you a little with this cube. It isn't bad at all.
