your main speedcube

That's what I would've guessed. Worth a shot though since at least it has zero petroleum.
 
Hmm i use an Old type A (all of it is old type a) and heavy duty CRC as ma lube. Works well for me.
 
Storebought thats been sanded and will soon turn it into a spring-screw structured cube.
 
Last edited:
Core: Old Type A
Screws: Type C
Springs: new D
Washers: stacked E and B
Centers: 2006 Rubiks DIY
Edges: A3, half with caps, half without.
Corners: F
all cubies are black.
Stickers: Black across from bright yellow, bright green across from bright orange, dark red across from pastel blue.
lube: a secret mixture of whale oil and children's tears.

A little too specific, but awesome all the same.

Mine is a regular type A from PuzzleProz, nutin special.
For OH I use an old type A from C4Y with Rubik's corners. (I use this for 2H sometimes though. Slow solving :cool::cool:)
 
You must have missed the sarcasm ;)
I mean, its not like we've had this thread before.
 
Mine is:
Type a core
Type b screws
Type d washers (maybe there aren't any.)
type d springs
type f centers
type c center caps
type e edges
type z corners
type y corner caps.
Cubesmith bright vinyl stickers set.
All lubed with a 10:4:3 ratio of silicone release agent, Skippy Peanut butter(chunky), and WD-43, applied delicately with a fine paintbrush.
The cube cuts corners well, and it never pops or locks up!
Super smooth!!!!!
 
Mine is:
Type a core
Type b screws
Type d washers (maybe there aren't any.)
type d springs
type f centers
type c center caps
type e edges
type z corners
type y corner caps.
Cubesmith bright vinyl stickers set.
All lubed with a 10:4:3 ratio of silicone release agent, Skippy Peanut butter(chunky), and WD-43, applied delicately with a fine paintbrush.
The cube cuts corners well, and it never pops or locks up!
Super smooth!!!!!

i can beat that.

Ok

core: type a, and use a razorblade to shave off the imperfections.
type c screws
type e springs
type d small washers and type f large ones, remember large then small on half of the centers and the other way round for the other 3.
type d centers with the screw at a 93 degree angle
Type abcdef center caps, one on each side.
type a third model edges without caps.
Type b corners

Sanded with high quality sandpaper imported from france.

Lubed with the purest of waters mixed in a 2:1 ratio with the sweat of god.
Needs to be broken in with excactly 183 turns.



Your go whoever! Beat that!
 
Mine is:
Type a core
Type b screws
Type d washers (maybe there aren't any.)
type d springs
type f centers
type c center caps
type e edges
type z corners
type y corner caps.
Cubesmith bright vinyl stickers set.
All lubed with a 10:4:3 ratio of silicone release agent, Skippy Peanut butter(chunky), and WD-43, applied delicately with a fine paintbrush.
The cube cuts corners well, and it never pops or locks up!
Super smooth!!!!!

i can beat that.

Ok

core: type a, and use a razorblade to shave off the imperfections.
type c screws
type e springs
type d small washers and type f large ones, remember large then small on half of the centers and the other way round for the other 3.
type d centers with the screw at a 93 degree angle
Type abcdef center caps, one on each side.
type a third model edges without caps.
Type b corners

Sanded with high quality sandpaper imported from france.

Lubed with the purest of waters mixed in a 2:1 ratio with the sweat of god.
Needs to be broken in with excactly 183 turns.



Your go whoever! Beat that!

I have a cube with:
Type A core
3 Type C corners
1 Type E corner
4 Type D corner
3 Type F edges
6 Type B Edges
3 Storebought Edges
4 Type D screws
1 old Type D screw
1 Type E screw
5 big washers from a Rubiks.com DIY
1 D type big washer
NO little washers whatsoever
Type C centers
Lubed with a pi:e ratio of dihydrogen monoxide and WD-39
 
Overall, the BEST lube is skippy peanut butter (chunky), Chocolate melted on a stove which is exactly 59.3 degree celsius, and a drop of spring water from the highest peak of the Alps all mixed together in a ratio of 5246:2341:2452.
Must be exact hor... otherwise you will NOT get a smooth cube.

pcharles93, I will try out your hybrid! Where can you buy dehydrogen monoxide and Wd-39? Searched google but to no avail.

Edit: I tried it, I realized if you change one of the A corners to type Y, and some of the springs to type S, you will get an even better cube!!!! Try it!!!
 
Last edited:
Lol gotta love the sarcasm here. Mine is a month-old rubiks DIY. Its great. I think its a little loose. Because it pops way to easily.
Edit: Okay it was a little loose. Now it's perfect :) turns super fast, doesnt pop (yet). I also glued the center cappies on, now I can actually solve my cube without center caps flying all over. Love your cube, and it loves you back :cool:
 
Last edited:
i use my psychic powers to create a cube out of pure energy. then i solve it in about a yattosecond.
my physical cube is made from cream (for smooth turns), diamonds (hard pieces turn quickly) and oxygen (nice and light)... with C type edges.


i also have a type A II with an old A core that im fond of.
 
I've got a few.
A studio cube from a garage sale, some silicone, and its good to go.
A Rubik's Anniversary (my main), with some lube. It feels really 'dry' but I like it a lot.
A crappy, cheap, stiff cube on which I used a razor blade and sandpaper to perfect the shapes of the pieces. And it still locks up. The core is amazing, though...

Notice that the less modification used, the more efficient the cube is. I've also found that organic peanut butter works better than skippy :P
 
Overall, the BEST lube is skippy peanut butter (chunky), Chocolate melted on a stove which is exactly 59.3 degree celsius, and a drop of spring water from the highest peak of the Alps all mixed together in a ratio of 5246:2341:2452.
Must be exact hor... otherwise you will NOT get a smooth cube.
it!!!
Yup, I tried it..very smooth, but the thing is I ate up the cube after a few solves, very delicious too!! :p
 
Back
Top