Lingyun V2 Problems

Ltsurge

Veteran
Joined
Apr 26, 2011
Messages
504
Location
Vermillion City
I just got my Lingyun V2 as a DIY kit. I assembled it and lubed it with 3 in 1 silicone (my stickering was quite off :() After putting the center caps on I found I had two problems. One; my cube was EXTREMELY crunchy (very clicky), rough and slow (Even my badly assembled guhong was better). Two: when I went to loosen it so it would be faster, the center caps wouldn't come off. After much tugging and filing at the cap I managed to pry it off at the expense of one of my fingernails. I have since finished tensioning it to my likening but the center caps still bug me because every time I want to retension; I have to spend time filing and there is the possibility I would lose a fingernail.

IMHO the Lingyun V2 is a great cube, the corner cutting is pretty much equal to the Zhanchi but it is A LOT more clicky. Is there a mod I can do? (PS. I noticed that on the bottom of the corner stalks where the torpedoes contact, there are 3 nobs of plastic which probably need to be sanded down.

Thanks
 
So you think clicking is a problem in a cube? First of all, some people actually like clicky cubes. Second, why would you buy a lingyun 2 if you do not like clicky cubes?
 
I knew it would be clicky; I bought it because it was... but its really raw. I have tried a friends AV and the lingyun V2 is off the charts in comparison. I'm actually more concerened about the center cap problems though. Besides the clickyness is not the problem, its the speed (its a little too slow)
 
i dont think he knew that it was clicky
i would sand down or file the little nobs at the base of the stalks
Edit: ninja'd
ok then i would get new springs to relief tension without having the cube completly loosened up
or maybe break the current ones in?
 
Last edited:
I knew because of the prototype reviews...

EDIT
Yeah, breaking in is probably going to speed it up; I hope... My problem is more that it is slow rather than it is clicky.
 
Last edited:
So I just assembled my V2. I tried using my finger nail with little success. Instead of breaking my finger nail I used a lever.
 
I personally think that the caps being hard to come off is a good thing. This way we dont have to worry about them flying off in a solve. As to the clickiness, use lubix and it will go down greatly.
 
I personally think that the caps being hard to come off is a good thing. This way we dont have to worry about them flying off in a solve. As to the clickiness, use lubix and it will go down greatly.

Unfortunately I don't have lubix... The center caps are so tight that you can't even get them off when you want them too though
 
Unfortunately I don't have lubix... The center caps are so tight that you can't even get them off when you want them too though

True, but I personally like to get my cube at the perfect tension and then leave it there. I find that changing your tensions too much makes it hard for your hands to adjust to a cube making you lock up more. Just my two cents.
 
you can't even get them off when you want them too though

Flat head screw driver, butter knife or a key are all things you could use to easily remove the caps.
I don't see the problem. Loose centre caps are pretty much my only complaint about the ZhanChi.
Personally I use my 'cubing' nail clippers (I clip the corners off my CS tiles to make them fit Dayans better).
 
I feel that the V2 is not as good as the V1 with torpedoes or the V1 with the screw mod. The V2 is much more clicky and the caps are a problem too. I would rather have caps coming off because putting paper underneath has not failed me yet.
 
When i first got my Lingyun2 it was very clicky and slow, then i tensioned it(used a flathead, the cap nailed me in the eyeball), lubed it with diff oil(lubix style), 48point edge mod and Izovire's corner mod he does to the dayans. Then it turned good, but if you want less clicking, i think maybe scrape off the tracks? but that might ruin your cube
 
is it more clicky than a ZhanChi?? I was thinking about buying it but I already think that the Zhanchi is too clicky

yeah, I wouldn't recommended if you think the zhanchi is too clicky, personally I think the zhanchi is just right though, especially considering its speed and corner cutting
 
This is just a guess because I don't have a lingyun v2 or even a v1 but if you take the center caps off then do a little bit of sanding to the interlocking ledges, not too much though I can't emphasize that enough because if you do sand it too much the center caps won't stay on! But if you do it with very fine sand paper then the center caps should come off easier.
Also if you sand off those nubs, or burs as there called, you see and do the 48 point edge mod it should make it smoother.
Oh and also not many ppl notice this but if you look really closely at the torpedo they might have some Excess plastic from the molding process or burs as there called if you take a knife and just make sure all the torpedoes are smooth all the way around that should help with the clicking and probably lock ups but really more the clicking.
 
Last edited:
My LingYun V2 was real clicky and locky when I first got it but after lubing it with Silicone 50k and messing around with it it has become a lot better.
I think one of the main reason why it's terrible at the beginning is because the tensions where set wrong - at least the one I got that came pre-assembled. It required a lot of trail-and-error when jerking around with tensioning because it turns really well if it's set to loose but prone to popping.

You could also try lubing the core for less clickyness, I would only recommend doing this with 50k Silicone or Lubix since I don't know how other lubricants will affect the core.
 
Back
Top