New Member

[Samurai2o6]

just order a Ghosthand II (White), Dayan Guhong (White), Dayan Guhong (Black), and 4cc of Lubix, time for the agonizing 1-2 week shipping.

 

[Erzz]

You should go here and do all the mods and lubrication techniques to your GuHong if you want it to be really good.

 

[Samurai2o6]

yeah I was thinking about modding one of the guhongs with the Ultimate Lubix mod.

 

[collinbxyz]

There should be a thread for all the new members...

 

[cubeslayer]

You can be surprised at how good a store bought can become after lubing it with silicone and breaking it in. I can get mid 20s with various lubed store bought cubes.

 

[daniel0731ex]

I wouldn't recommend GuHongs to beginners as they hinders your learning of fingertricks. You should start with a "normal" cube until you are reasonably comfortable with your turning, THEN you have the minimum skill needed to start cubing on a Guhong.

I'd say use a cube that is considerably faster, but with less tolerance, than your Guhong to practice, for the best effect when you use your Guhong in a comp. (e.g. Maru DIY)

 

[JyH]

Just ignore the whole type-x naming system and go for the actual company names. The most known cubes right now are Ghosthand II, Dayan's (Guhong, lingyun, etc), Alpha 5, maybe C4Y 3x3, F-II. Out of those cubes they say Ghosthand is the quietest, F-II is the smoothest, Guhong is the fastest, Alpha 5 is also fast but in comparison to the guhong it's a lot more clicky, lingyun is like guhong but pops more from what I've heard. I've had a C4Y, was kinda meh, had a heavy feeling and it didn't really cut corners. I didn't get to test it out for more than a few solves before it fell on the floor and completely shattered the core, and I had to throw it away.

And you don't need to get a type A core for your guhong, these types of modifications are for people that have like sub 20 averages and every millisecond counts towards getting a new world record and stuff like that. Right now as long as you have a decent cube, you should just worry about improving your times by practicing and learning algorithms.

C4Y Cores are the most durable. They can't just "shatter" if it falls on the ground. Even a hammer won't do you any good to it.

 

[Samurai2o6]

I wouldn't recommend GuHongs to beginners as they hinders your learning of fingertricks. You should start with a "normal" cube until you are reasonably comfortable with your turning, THEN you have the minimum skill needed to start cubing on a Guhong.

I'd say use a cube that is considerably faster, but with less tolerance, than your Guhong to practice, for the best effect when you use your Guhong in a comp. (e.g. Maru DIY)

would a ghosthand II work as a started in ur opinion?

 

[MalusDB]

Hey guys, I'm another new member here. right now Im using an original store bought rubix brand cube. I lubed it with cooking oil since i didnt have any other lube handy, and in full knoledge that I was going to be getting another cube ( i actually started on a brandless cube that you would need fingers of steel to do finger tricks on, but i learnt some theory using it). I was just wondering if you could give me some insight into just how much advantage i would have in buying a new cube at this stage. I am by no means fast, averaging around 1.20, but i have only started using full f2l and only about to begin looking at the advanced final layer solves.

tl;dr how much improvement will a new cube make me on a 1.20 time with a mutilated store bought rubixs brand?

thanks in advance.

 

[collinbxyz]

Hey guys, I'm another new member here. right now Im using an original store bought rubix brand cube. I lubed it with cooking oil since i didnt have any other lube handy, and in full knoledge that I was going to be getting another cube ( i actually started on a brandless cube that you would need fingers of steel to do finger tricks on, but i learnt some theory using it). I was just wondering if you could give me some insight into just how much advantage i would have in buying a new cube at this stage. I am by no means fast, averaging around 1.20, but i have only started using full f2l and only about to begin looking at the advanced final layer solves.

tl;dr how much improvement will a new cube make me on a 1.20 time with a mutilated store bought rubixs brand?

thanks in advance.

You may average about a little over 1 minute when you get a new cube. There are a lot of good beginners cubes. I think the mf8 3x3 would be a good beginner's cube, but I don't know for sure. I personally think it's pretty fast with decent corner cutting. You can get one from China or North East United States. You live in Ireland, so I'm not sure which would be faster...

 

[MalusDB]

You may average about a little over 1 minute when you get a new cube. There are a lot of good beginners cubes. I think the mf8 3x3 would be a good beginner's cube, but I don't know for sure. I personally think it's pretty fast with decent corner cutting. You can get one from China or North East United States. You live in Ireland, so I'm not sure which would be faster...

Thanks, that seems about right, although i feel that the main thing slowing me down is manouverability. I can see where I'm going, and my hands make the movements, but lock ups are literally every 3rd 90 degree rotation. I hit an unlucky 45 earlier today actually when the cube managed to behave itself right through F2L .

 

[Magix]

thanks, I love the addiction of wanting to fix the cube faster, right now I'm currently learning the 2-look OLL and 2-look PLL, but I was thinking about getting 1 Ghosthand II and 2 Dayan Guhong with lubix at I think cubedepot but my question is if the dayan diy kit comes with stickers....

Why do you need three 3x3's?

 

[Bapao]

Why do you need three 3x3's?

I own 11 or so 3x3x3s. I don't "need" more than one but just enjoy collecting/ comparing cubes. Having at least two would be a good idea though; in case one breaks.