Is this a real QJ, and how to set tension!

ambo_o7

Regular
Joined
May 29, 2010
Messages
41
Is this a real QJ, i got it really cheap of ebay.

313jb7k.jpg
aky4hk.jpg
1z23kao.jpg




And how do i set the tension, its really loose and id like to tighten it.
 
And how do i set the tension, its really loose and id like to tighten it.

i would take the cube apart, then loosen the one screw in the core a little bit

He wants to tighten it

So he tightens it following his instructions? srs.

anyway, I'm pretty sure that for QJ's, you don't have to take apart the cube. If you find a screw driver that is narrow enough, and you can find which 4 centers the screw is under, you can put the screw through the 4 centers (in the middle of them), and then tighten. That's what I do.
 
And how do i set the tension, its really loose and id like to tighten it.

i would take the cube apart, then loosen the one screw in the core a little bit

He wants to tighten it

So he tightens it following his instructions? srs.

anyway, I'm pretty sure that for QJ's, you don't have to take apart the cube. If you find a screw driver that is narrow enough, and you can find which 4 centers the screw is under, you can put the screw through the 4 centers (in the middle of them), and then tighten. That's what I do.

no.
 
tightening the screw makes it looser.....a tight screw makes the ball core slightly smaller and therefore looser....a looser screw expands the ball core slightly and tightens the cube
 
And how do i set the tension, its really loose and id like to tighten it.

i would take the cube apart, then loosen the one screw in the core a little bit

He wants to tighten it

So he tightens it following his instructions? srs.

anyway, I'm pretty sure that for QJ's, you don't have to take apart the cube. If you find a screw driver that is narrow enough, and you can find which 4 centers the screw is under, you can put the screw through the 4 centers (in the middle of them), and then tighten. That's what I do.

no.

No what?
 
tightening the screw makes it looser.....a tight screw makes the ball core slightly smaller and therefore looser....a looser screw expands the ball core slightly and tightens the cube

You have no logic

and you have no concept of engineering.....a larger ball core will exert more pressure on all the pieces outward holding them in place slightly more and adding a "tighter" feeling......the only argument for tightening the screw and making the core slightly smaller is it may tighten the tracks for the center 2 layers making them harder to turn and making the "tighter" feeling but only on the inner 2 layers, the outer layers would be looser.....its the same concept as a balloon, you blow it up more exerting more pressure on the rubber "skin" making it tighter, you let air out making the rubber "skin" feel looser
 
tightening the screw makes it looser.....a tight screw makes the ball core slightly smaller and therefore looser....a looser screw expands the ball core slightly and tightens the cube

You have no logic

and you have no concept of engineering.....a larger ball core will exert more pressure on all the pieces outward holding them in place slightly more and adding a "tighter" feeling......the only argument for tightening the screw and making the core slightly smaller is it may tighten the tracks for the center 2 layers making them harder to turn and making the "tighter" feeling but only on the inner 2 layers, the outer layers would be looser.....its the same concept as a balloon, you blow it up more exerting more pressure on the rubber "skin" making it tighter, you let air out making the rubber "skin" feel looser

That logic only works when you are exerting pressure on something that can apply a force against the force causing the pressure. Since the peices are not fixed they are just going to follow the ball core and get looser. The ball core will expand but will not exert more pressure because the peices of the cube are not fixed down. Its like blowing up a balloon with random peice of paper stuck to it. The peices of paper will get further away from each other since they are not linked together, only by the balloon as a central 'core'. This is the same concept as the cube. The peices are not linked together, only by the core.
 
Last edited:
tightening the screw makes it looser.....a tight screw makes the ball core slightly smaller and therefore looser....a looser screw expands the ball core slightly and tightens the cube

You have no logic

and you have no concept of engineering.....a larger ball core will exert more pressure on all the pieces outward holding them in place slightly more and adding a "tighter" feeling......the only argument for tightening the screw and making the core slightly smaller is it may tighten the tracks for the center 2 layers making them harder to turn and making the "tighter" feeling but only on the inner 2 layers, the outer layers would be looser.....its the same concept as a balloon, you blow it up more exerting more pressure on the rubber "skin" making it tighter, you let air out making the rubber "skin" feel looser

That logic only works when you are exerting pressure on something that can apply a force against the force causing the pressure. Since the peices are not fixed they are just going to follow the ball core and get looser. The ball core will expand but will not exert more pressure because the peices of the cube are not fixed down. Its like blowing up a balloon with random peice of paper stuck to it. The peices of paper will get further away from each other since they are not linked together, only by the balloon as a central 'core'. This is the same concept as the cube. The peices are not linked together, only by the core.

the only pieces connected to the core are the centers....the rest rely on their proximity to the centers for tension
 
tightening the screw makes it looser.....a tight screw makes the ball core slightly smaller and therefore looser....a looser screw expands the ball core slightly and tightens the cube

You have no logic

and you have no concept of engineering.....a larger ball core will exert more pressure on all the pieces outward holding them in place slightly more and adding a "tighter" feeling......the only argument for tightening the screw and making the core slightly smaller is it may tighten the tracks for the center 2 layers making them harder to turn and making the "tighter" feeling but only on the inner 2 layers, the outer layers would be looser.....its the same concept as a balloon, you blow it up more exerting more pressure on the rubber "skin" making it tighter, you let air out making the rubber "skin" feel looser

That logic only works when you are exerting pressure on something that can apply a force against the force causing the pressure. Since the peices are not fixed they are just going to follow the ball core and get looser. The ball core will expand but will not exert more pressure because the peices of the cube are not fixed down. Its like blowing up a balloon with random peice of paper stuck to it. The peices of paper will get further away from each other since they are not linked together, only by the balloon as a central 'core'. This is the same concept as the cube. The peices are not linked together, only by the core.

the only pieces connected to the core are the centers....the rest rely on their proximity to the centers for tension

Then if you loosen the ball core, the centres get loose. That means the rest of the peices will also become loose because the centres will follow the ball core and expand. The edges and centres will therefore become looser because the centres that are holding them down have expanded away from them. Need proof? Go loosen a screw on a ballcore 4x4. =.=.
 
Last edited:
...Why are the pictures so freaking huge??
Resize theme here. Please.

Sry, took pics on my phone and forgot the resize.


and at the whole screw conversation, i loosended screw and the cube loosened more, the logic of movement contradicts the theory of loosening the interior to make the exterior tighter :|

And ye, i guess its just a loose cube :P no problem, ima buy a mini qj soon an hope its a bit better.

Thanks
 
Back
Top