Alpha 4

Alpha 4?

  • Like

    Votes: 9 50.0%
  • Dislike

    Votes: 9 50.0%

  • Total voters
    18
  • Poll closed .

koreancuber

Master
Joined
Jan 31, 2010
Messages
1,089
Location
Seoul, Korea, South Korea
YouTube
Visit Channel
I just got this cube, but I wanted to make a poll before I made a review, to see how many like or dislike this cube.

I can't believe so many people dislike this cube.

Here's what I think.

The cube sucks, at least when you first get it. Mine was set at a high tension (I traded), so I took the whole cube apart, to see the internal structure and all. This cube and the A-5's only similar characteristic is the edge piece. The sizes are different and all, but the look the same (except the tab on the edge, the A-4 doesn't have one). The corners look fragile, but the high quality plastic backs that up. (No real worries unless you like throw your cube around). The core looks like a regular Alpha core (good center caps). One thing I did notice, while I was taking the cube apart), was that the edges had tracks, and the tracks had imperfections, unlike other Alpha products. Well anyway, because I wanted the full performance of the cube, I took a good 30 minutes to shave down all of them. Then I lubed it with Jig-a-loo, by laying them out piece by piece and spraying it. For the core, I took the screws and springs out (for some reason, they were hard to get out). The core was simply an Alpha core (yellow, not rounded), and the springs were the same ones as on the A-5).

After lube and assembly. I set it to the highest tension, and turned it 9~10 times on all 6 sides. Then I assembled it (the edges are hard to put in), and stickered it (I have this tendency to always resticker a cube, when I get it). Hmm.. for the performance, I'd give it a 9/10. I'm pretty impressed with this cube. I wanted to see how it was, since there were no reviews on youtube, and almost none in the forum. This cube feels like and A-2 + A-5. The tracks make it feel similar to the A-2, but the edges and corners make it feel like an A-5. Lockups. It seems as though the lockups are reducing as I solve it more and more. I set the tension as medium-loose. I get lockups occasionally, but not that much. The white cube is killing my recognition (and the stickers. I hate all stickers that aren't half-bright or bright Cubesmith stickers). anyway, I broke my PB somehow (13.xx) and I'm getting good times with it.

Problems. 1.) The corner and edge sizes.... CUBESMITH STICKERS PEEL. 2.) Fragility. The corners look too weak. 3.) Center caps. They don't fall off, but they are hard to get off (must use some sort of sharp thing). 4.) Occasional lockups.

To sum it up, I give a rating of 9.3/10. I guess this is my secondary speedcube, until I find another con to it. I'm not sure what makes the majority of you guys hate this cube, but if you tune it perfectly, it's a wonder. The next time you buy Alpha products, buy this one (AND the A-2, 3 or Haiyan Memory )
 
Last edited:
It's a prototype of the A5, which everyone seems to love. So it should be no different. But, apparently, it has a lot of locks, so no one likes it. So shouldn't everyone hate the A5 too? :confused:
 
It's a prototype of the A5, which everyone seems to love. So it should be no different. But, apparently, it has a lot of locks, so no one likes it. So shouldn't everyone hate the A5 too? :confused:

It being a prototype would insinuate that they made improvements.
 
It's a prototype of the A5, which everyone seems to love. So it should be no different. But, apparently, it has a lot of locks, so no one likes it. So shouldn't everyone hate the A5 too? :confused:

It being a prototype would insinuate that they made improvements.

Yes, of course. But I've taken a close look at both cubes and can't see that much of a difference.
 
I can't believe so many people dislike this cube.

Here's what I think.

The cube sucks, at least when you first get it. Mine was set at a high tension (I traded), so I took the whole cube apart, to see the internal structure and all. This cube and the A-5's only similar characteristic is the edge piece. The sizes are different and all, but the look the same (except the tab on the edge, the A-4 doesn't have one). The corners look fragile, but the high quality plastic backs that up. (No real worries unless you like throw your cube around). The core looks like a regular Alpha core (good center caps). One thing I did notice, while I was taking the cube apart), was that the edges had tracks, and the tracks had imperfections, unlike other Alpha products. Well anyway, because I wanted the full performance of the cube, I took a good 30 minutes to shave down all of them. Then I lubed it with Jig-a-loo, by laying them out piece by piece and spraying it. For the core, I took the screws and springs out (for some reason, they were hard to get out). The core was simply an Alpha core (yellow, not rounded), and the springs were the same ones as on the A-5).

After lube and assembly. I set it to the highest tension, and turned it 9~10 times on all 6 sides. Then I assembled it (the edges are hard to put in), and stickered it (I have this tendency to always resticker a cube, when I get it). Hmm.. for the performance, I'd give it a 9/10. I'm pretty impressed with this cube. I wanted to see how it was, since there were no reviews on youtube, and almost none in the forum. This cube feels like and A-2 + A-5. The tracks make it feel similar to the A-2, but the edges and corners make it feel like an A-5. Lockups. It seems as though the lockups are reducing as I solve it more and more. I set the tension as medium-loose. I get lockups occasionally, but not that much. The white cube is killing my recognition (and the stickers. I hate all stickers that aren't half-bright or bright Cubesmith stickers). anyway, I broke my PB somehow (13.xx) and I'm getting good times with it.

Problems. 1.) The corner and edge sizes.... CUBESMITH STICKERS PEEL. 2.) Fragility. The corners look too weak. 3.) Center caps. They don't fall off, but they are hard to get off (must use some sort of sharp thing). 4.) Occasional lockups.

To sum it up, I give a rating of 9.3/10. I guess this is my secondary speedcube, until I find another con to it. I'm not sure what makes the majority of you guys hate this cube, but if you tune it perfectly, it's a wonder. The next time you buy Alpha products, buy this one (AND the A-2, 3 or Haiyan Memory :):):):))
 
1. the A4 is not a prototype of the A5. it's just that they have similar designs, but it was meant to be a seperate model.
2. this cube was meant to be a cube for beginners who just started learning finger tricks; it's one of the cubes that never pops while still having incredible speed.
3. the large plastic washer makes the cube faster.
 
attachment.php
 

Attachments

  • plastic washer.JPG
    plastic washer.JPG
    17.5 KB · Views: 125

did you mean "the big washer" are washers that made from plastic?
Can you explain the teory behind the picture?
i dont really get the point from the picture about making the cube faster..:confused:

anyway, i like the A4
it does lock up, but it's not that bad. it cuts corner quite good too tho, and I think it's the cheapest from all Guo Jia Alpha 3x3x3 series (exlude the minis)
 
Back
Top