Some cubes I would like for my birthday - what do you think?

theevilworm

Member
Joined
Dec 10, 2009
Messages
16
Hi guys,

next month its my birthday and so far, I only got these cubes so far:

a VERY small 2x2 cube from a mathematic challenge at my school (Känguru);

an original 3x3 and 4x4 Rubiks Cube, and they suck; (well, 3x3 is okay since lubrication, but 4x4 is unbelieveable bad. I never use it because it always locks up)

a 5x5 V-CUBE;

So for my birthday I thought of the following cubes:

a pyraminx
a new 3x3 (probably DIY, I heard these are a good choice)
a new 2x2
a 7x7
something unfamiliar, like siamese or 1x3x3

I looked on www.cubikon.de (since I'm German) for these, and would like your opinion.

http://www.cubikon.de/-Alle-Produkte-Pyraminx-Magische-Pyramide-Drehpuzzle-schwarz/a-1010.html (Pyraminx... theres only these two, without any clue who made them)

http://www.cubikon.de/-Alle-Produkte-Zauberwuerfel-Floppy-Cube/a-1088.html (1x3x3)

http://www.cubikon.de/-Alle-Produkt...weiss-Original-Verdes-Innovations/a-1050.html (7x7, V-CUBE White)

For the 3x3 DIY and 2x2, I got no clue which brand is good or what type would be the best choice. Could you give me some tips here?

I would really like your opinions and maybe links to better cubes! Thanks in advance!
 
Kauf dir den F2 3x3 ;)

Der Floppy Cube ist gut, aber nicht wirklich ein echtes Puzzle (nach 5 Sekunden rumprobieren gelöst).
Der V-Cube 7 ist super, hol ihn dir! ^^

Der Pyraminx ist schlecht, die Sticker gehen schnell ab.

Unfamiliar --> Square-1?

Sorry, that I responded in German, but I think it isn't really a problem :p
 
Wow, es treiben sich tatsächlich Deutsche hier rum? Cool! Ich wusste nicht, ob es erlaubt ist, Deutsch zu schreiben. Ich schreibe trotzdem lieber English, der Großteil versteht mich ja sonst nicht :)

English: Wow, there are Germans on this board? Cool! I didn't know wether posting in German is allowed. I prefer writing English since the majority of the community wouldn't understand me otherwise :)

Could you please post a link to the F2 3x3 cube you're referring too? I'm really confused with these types.
@Others: Which 3x3 types would you recommend?

Okay, so the Floppy cube is too easy, I see. I wasnt sure about that, I thought it may be harder than it looked. The Square-1 looks interesting, is it very hard? Are there some good tutorials out there?

And are there factories that produce good quality pyraminxes? Could you give me name or link?

I'll surely get the 7x7, I'll just skip 6x6 as I dont like the even numbers that much, and 7x7 is better for bragging, lol (mostly because of its pillow-form) =D
 
For 2x2 Eastsheen is far superior to all other 2x2 cubes. They don't even need lube to turn fast. For the 3x3x3 I have a Cube4you DIY and I really like but the stickers suck, but cubesmith sells good stickers.
 
For 2x2 Eastsheen is far superior to all other 2x2 cubes. They don't even need lube to turn fast. For the 3x3x3 I have a Cube4you DIY and I really like but the stickers suck, but cubesmith sells good stickers.

If I'm not mistaken, a good number of people prefer the LanLan 2x2x2 also.
 
2x2x2 : definitely go for a LanLan or a Ghost Hand because they are basically Eastsheen with springs.

Allright, seems as LanLan is superior. Ill go for LanLan 2x2.
And I looked at Square-1, too. It looks AWESOME! Are there different Square-1's sold, or can I buy the one from Cubikon?

For 3x3: I'm really confused with the naming system. I read this thread: http://www.speedsolving.com/forum/showthread.php?t=12659, but still confused...
Is Type FII sold at Cubikon excactly the same FII sold at C4Y? Does this "type" mean what factory made the cube?
 
Type is what ''is'' the cube. No matter where you buy it, an Fii is an Fii.

It's very confusing at first I know! I had a lot of problems understanding too. You'll get around. Go check Stephan Pochhman's website, it explains everything with images.
 
Thanks for that explanation, I begin to understand...
I the thread I posted in my last post Type F wasnt the best cube, in fact, the thread starter rated it bad.
Has FII fixed these problems?
And what about the other cubes you mentioned before, like A5 oder DianSheng? I had only planned to get one new 3x3.

Moreover, where can I buy a good pyraminx?
 
Rpotts, thanks for all the links you provided! Are these really the types you wrote next to them? The description on the site doesnt say anything about these :-S Are there several names for the same cube?

I thought Type A5 is A5, and nothing else?!
 
from your descriptions, i think that an A3f would fit you the most.
it seems that you only have a storebought 3x3, and never used a DIY cube before. For someone like you, a solid, smooth and unpopable cube would be the best choice for you.
 
from your descriptions, i think that an A3f would fit you the most.
it seems that you only have a storebought 3x3, and never used a DIY cube before. For someone like you, a solid, smooth and unpopable cube would be the best choice for you.

I oppose. The A3f is quite fragile. The edges are very easy to break off. I'd say get an F-II, A-5 or the C-I. The F-II and A-5 don't pop much, but the c-I does. They are all fast, but I like the A-5 the best. Just wait a bit until the new mold comes out and then try it out.
 
Last edited:
from your descriptions, i think that an A3f would fit you the most.
it seems that you only have a storebought 3x3, and never used a DIY cube before. For someone like you, a solid, smooth and unpopable cube would be the best choice for you.

I oppose. The A3f is quiet fragile. The edges are very easy to break off. I'd say get an F-II, A-5 or the C-I. The F-II and A-5 don't pop much, but the c-I does. They are all fast, but I like the A-5 the best. Just wait a bit until the new mold comes out and then try it out.

you confused the A3 with the A3f. The edge may be a bit less sturdy, but it would never break unless you do it on purpose. Also, I'm talking about the feel of the cube, and it would be a very good fit for someone who never had a DIY before.
PS: it's not that quiet either
 
@daniel0731ex: lol that was edited while you made the post. anyway, the A3F is the one that the Alpha company is still producing (old one stopped). They are know to be very fragile, and a person with a Rubik's brand (sturdy, never popping cube), I wouldn't recommend that cube. The feel of the cube is good, but the cube itself is very very not recommended if it's you first DIY.
 
^C I is easier to transition to from a storebought. F II and A V arent that much harder either. A III-f is an extremely acquired taste.
 
Back
Top