Cube Selection Help - 2x2, 3x3, 4x4

Status
Not open for further replies.

theace

Master
Joined
Mar 9, 2010
Messages
1,184
Location
Mumbai, Maharashtra, India
WCA ID
2010RAOA01
YouTube
Visit Channel
First up, hey everyone! First post here. I've been at these forums for quite a while. Finally decided to register and all.

Ok, so down to buisness, I need help with cube selection. I've been cubing for about 4 to 6 months now and I've used ONLY Storebought cubes (The crappy Hasbro things). I didn't get a good one for the plain simple reason that I don't have a credit card. Anyway, my dad has decided to buy me a good cube. Catch is, it's gonna be a one time purchase, so I cant experiment. I'm gonna try to tell you as much as possible about my style and hopefully, you guys could help me out...

I am not a very precise cuber. I like cutting corners and I hate lockups. Speed is not too much of an issue (I was considering type C, but I heard that it has speed but doesn't cut). I tend to be VERY rough with the cube (I practically abuse it lol). That's all I can say. If you need any more info, lemme know.

Basically, I want a cube that cuts well and has a good structural integrity (i.e. doesn't pop too much). I've played with a Type F once (it was set VERY loose). Though I loved the cutting ability, the popping put me off. It popped 4 times through 3 solves.

Anyway, I've been considering these cubes:
Cube4You DIY
Type F
Type C
Type A (II or III)

If someone could give me a comparitive review on only these 4 types, it'd be great. Any other suggestions? I read that really big cube guide here (I forgot who wrote it thouhg, sorry).

Also, which 2x2 and 4x4 would you recommend? I've never handled any of those types. Again, same criteria: Good cutting ability and structural integrity.

Thanks guys...
 
Hi. 2x2 and 4x4 same suggestion as ianini. As for 3x3 i haven't tried many cubes but I liked my type F-II, however the core break easily so you might want to change to type A cores later. Haiyan cubes are also very good i've heard, which is just a modification of type A-V.

Hopey this helps and welcome to the forum!
 
First of all, welcome (:
Ok, for 2x2x2 get a Lanlan. It does cut corners, but it locks up a bit too. But that's the only 2x2x2 I've tried. It's kinda one of those hit and miss. Some are good, some are bad. Just adjust the tension if you get a tight on.
4x4x4- I've only tried a storebought Eastsheen. It was alright, but after awhile, the sides get loose and they lock up. I was considering getting a Mini QJ, sometime soon. But I also heard a YJ cuts corners very well. I can't really tell you much since I haven't tried both of them. Just look for reviews about them.
Now for 3x3x3.
Cube4You DIY- The C4Y locks up. I have one and it locked up so much. But I think I just tensioned it wrong. I might try messing with it again. It does cut corners too.
Type F- I have a ghost hand. The ghost hand is really light and has rounded cubies. It practically never pops (think I've only had 3 small pops in over a month of use) and only locks up a little bit. It comes preassembled which is good if you haven't assembled a DIY before. Also you don't really have to lube it. It's also pretty quiet. The only thing about it is that it has a different feel than other cubes. In my opinion it just feels too different for me.
Type C- It's a good cube. My regular type C kinda sucked probably because I had to assemble it myself and messed up, but my mini type C was just amazing. It cut corners pretty well and was fast. It locked up a little bit but that was because I'm rough with my cubes too xD It came preassembled and lubed. I really liked it. It was my main speedcube til I lost it -_- haha
And for Type A- I've never tried one so I can't really tell you much about it. I really hope to get one soon though (:

I hoped I was able to help you a little. Good luck choosing your cube. Happy cubing (:
 
The type FII is basically an F only faster, with slightly less corner cutting, and absolutely no pops (I've had 0 pops in several hundred if not 1000+ solves of my FII)
 
Yeah, some store-boughts are terrible.

I would recommend these cubes.

2x2: LanLan
3x3: F-II or Ghosthand
4x4: Mini QQ or large QJ

All these cubes can be purchased from http://www.popbuying.com/products.pb/category.13

-Ian

Edit: Here is a list of the names of all these puzzles.
http://www.speedsolving.com/forum/showthread.php?t=18103
Thanks. I'll go in for the non tiled 4x4 and lanlan 2x2

The type FII is basically an F only faster, with slightly less corner cutting, and absolutely no pops (I've had 0 pops in several hundred if not 1000+ solves of my FII)
How about a comparison between a Type FII and Ghosthand?

Thanks for all the advice everyone. I'll go in for a Type FII or a ghosthand. If anyone could compare those two, it'd be really cool.

Also, do you know where popbuying ships from? Is the shipping free globally? If it is, than this is frickin gold!
 
Also, do you know where popbuying ships from? Is the shipping free globally? If it is, than this is frickin gold!
Popbuying ships from China and the shipping is free globally, but it can take over a month to get your cubes.

I would recommend the following:

2x2: LanLan
I prefer this over my not broken in ES, but come people prefer broken in ES's over this. I like the corner cutting and smoothness.

3x3: Old type A-II or Taiyan
I use the old A-II as my main speed cube because it rarely locks up, but pops once in a while. It doesn't cut corners over 30 degrees on a reasonable tension, but I really don't care about corner cutting. If you hate lock-ups and not too picky about corner cutting, get this.
The Taiyan never pops, and the corner cutting is great, but it is too speedy for my liking. If you hate pops and like fast cubes, get this.

4x4:mini QJ 4x4
I use this as my main 4x4. When you first get it it won't feel that good, but after breaking it in and lubing it, it will become an amazing speedcube. It turns really nice and has pretty good corner cutting(for a 4x4 at least).

You can buy all the at my store, which will be restocking in a few days.
 
Last edited:
Yea, if you're rough with the 3x3 then your best bets are the F-II and Old A-I, any other type As will feel like theyre going to break when you use them and the Cs are a little slow in comparison with the F-II. Another alternative would be the TaiYan which is more like a midpoint between the F-II and old A-I.....the old A-I is a bit heavy, never locks up, has a decent speed to it, but pops occasionally. The F-II is ridiculously fast, never locks, never pops, and is around the medium range in weight.

And as far as 4x4s, get the mini qj hands down, I've had both the eastsheen and mini qj and i almost got to the point of throwing my eastsheen at the wall for how much it locks up. Not to say the mini qj doesn't lock up, but it is nowhere near the eastsheens number of lock ups
 
First up, hey everyone! First post here. I've been at these forums for quite a while. Finally decided to register and all.

Ok, so down to buisness, I need help with cube selection. I've been cubing for about 4 to 6 months now and I've used ONLY Storebought cubes (The crappy Hasbro things). I didn't get a good one for the plain simple reason that I don't have a credit card. Anyway, my dad has decided to buy me a good cube. Catch is, it's gonna be a one time purchase, so I cant experiment. I'm gonna try to tell you as much as possible about my style and hopefully, you guys could help me out...

I am not a very precise cuber. I like cutting corners and I hate lockups. Speed is not too much of an issue (I was considering type C, but I heard that it has speed but doesn't cut). I tend to be VERY rough with the cube (I practically abuse it lol). That's all I can say. If you need any more info, lemme know.

Basically, I want a cube that cuts well and has a good structural integrity (i.e. doesn't pop too much). I've played with a Type F once (it was set VERY loose). Though I loved the cutting ability, the popping put me off. It popped 4 times through 3 solves.

Anyway, I've been considering these cubes:
Cube4You DIY
Type F
Type C
Type A (II or III)

If someone could give me a comparitive review on only these 4 types, it'd be great. Any other suggestions? I read that really big cube guide here (I forgot who wrote it thouhg, sorry).

Also, which 2x2 and 4x4 would you recommend? I've never handled any of those types. Again, same criteria: Good cutting ability and structural integrity.

Thanks guys...
LOL cube4you's lock up like hell. seriously, they lock up CONSISTENTLY.. so don't get c4y... just... no.... get an F-II
 
First up, hey everyone! First post here. I've been at these forums for quite a while. Finally decided to register and all.

Ok, so down to buisness, I need help with cube selection. I've been cubing for about 4 to 6 months now and I've used ONLY Storebought cubes (The crappy Hasbro things). I didn't get a good one for the plain simple reason that I don't have a credit card. Anyway, my dad has decided to buy me a good cube. Catch is, it's gonna be a one time purchase, so I cant experiment. I'm gonna try to tell you as much as possible about my style and hopefully, you guys could help me out...

I am not a very precise cuber. I like cutting corners and I hate lockups. Speed is not too much of an issue (I was considering type C, but I heard that it has speed but doesn't cut). I tend to be VERY rough with the cube (I practically abuse it lol). That's all I can say. If you need any more info, lemme know.

Basically, I want a cube that cuts well and has a good structural integrity (i.e. doesn't pop too much). I've played with a Type F once (it was set VERY loose). Though I loved the cutting ability, the popping put me off. It popped 4 times through 3 solves.

Anyway, I've been considering these cubes:
Cube4You DIY
Type F
Type C
Type A (II or III)

If someone could give me a comparitive review on only these 4 types, it'd be great. Any other suggestions? I read that really big cube guide here (I forgot who wrote it thouhg, sorry).

Also, which 2x2 and 4x4 would you recommend? I've never handled any of those types. Again, same criteria: Good cutting ability and structural integrity.

Thanks guys...
LOL cube4you's lock up like hell. seriously, they lock up CONSISTENTLY.. so don't get c4y... just... no.... get an F-II

No, C4Us wont lock up if you actually knows how to tune a cube.
 
Ii are by far your best bet as they're very good and will only break if you drop from a high distance (which I wouldn't suggest)
 
If you are buying from popbuying, I would say you definitely want to get the Fii, no questions about it. If you can afford it though, I would pick up a 2nd cube, just so you will have something different.
I hate type C, because it feels very rough and bumpy, but if you want something thats got a completely different feel from the Fii, its a good choice. Mini-C is also a nice cube, if you would like something that's a bit smaller than a normal cube. I think its better for one-handed, or if you have small hands.
People used to say that ghosthand was basically the same as Type F.
Some others that you might want to consider on popbuying are the Type A-V or the Haiyan cube.

You might want to pick up some extra stickers too, because the orange/red on the Fii can be a bit hard to tell the difference. I think popbuying sells some stickers, but I don't know if they are any good or not.
 
Status
Not open for further replies.
Back
Top