Thoughts on the Type A-V mod

koreancuber

Master
Joined
Jan 31, 2010
Messages
1,089
Location
Seoul, Korea, South Korea
YouTube
Visit Channel
Ok, so I modded my Type A V (the corner's edge sanding, edge sanding, and spring mod) and let me give some thoughts about it. Here's how it looks like
attachment.php

attachment.php

attachment.php

First, I accidentally also sanded the edge tip (the one that prevents it from popping) and it started popping like a Old Type A I. I recommend you to NOT TO SAND THE EDGE CUBIE AT ALL. The corner cutting and speed increased, but the popping went up like from 1 pop per 20 solves to 10 pops per 20 solves. I then decided to mod it by cutting the spring (one revolution). After I did this, the corner cutting decrease like crap (28 degrees and less). But, the speed increased a lot. The cube never popped, but I didn't like it very much because the corner cutting sucked. After about three days of heavy usage, my accuracy increased, and so the corner cutting really didn't matter. I decided to make the modded A -V my main speedcube. I think you guys should try it (ONLY mod the corner piece and springs if you want to. I am not responsible for the damage done on your cube). You should do the corner mod, not do the edge mod, and consider doing the spring mod if you'd like, but I do not recommend it if you did not do the edge mod.
<><
 

Attachments

  • P1010671.JPG
    P1010671.JPG
    57.7 KB · Views: 505
  • P1010673.JPG
    P1010673.JPG
    57.1 KB · Views: 492
  • P1010677.JPG
    P1010677.JPG
    64.6 KB · Views: 484
From my mod video of the edge tip?
the little piece that sticked out?
Mine popped less and moved faster after I made that mod.
 
I think maybe you should try my Haiyan-memory.If there have competiton in your country ,pelase ask the organizer to contact. I will give some as gift.Thanks.
 
Instead of cutting the springs you can just remove the small washers. That gave the same effect as what you said (much faster turning, worse corner cutting, lesser pops)

Also note that you have to tighten the tension if you do cut the springs/remove the washers.

But I removed the washers cos there was something wrong with my core that made it hard to turn. I don't recommend it if your A5 is smooth enough
 
My A-V has type C springs in it, which are better in my opinion, for my cubing style.

Less tension, less pops, faster speed, but you have to be more accurate, and it feels... flimsier.

Try it, and see what you think.
 
=/.

It is less popping, you have to consider the attributes of the springs, and WHY things work.

Hybrids fail because people randomly put stuff together and don't understand HOW and WHY the pieces act like they do.

Ugh, type C springs have less tension, so you can have it at a tighter setting, but less tension and LESS POPPING.
WHY? Because the screw is closer to the core, and the center can't move out as far.
But it's still fast because of the lesser tension.


That's why it REDUCES popping if you have the type C springs with a tighter setting.
 
Back
Top