Making StackMat compatible with CCT??

abr71310

Veteran
Joined
Dec 3, 2008
Messages
562
Location
Toronto, Ontario
WCA ID
2009SHAO02
YouTube
Visit Channel
Here's the "screenshot" (more like video documentary) of the problem, as it stands now... I unplugged it SINCE then, but I tried restarted, screwing around with input settings, changing mixers, normal stackmat values... EVERYTHING, and it still does this stuff to me!! T_T;;

[youtube]JDmAeK2Tozs&fmt=18[/youtube]


So yeah, as the ending of the video said, if you guys could lend me a hand I'd be SO grateful... I just want to start my session of 100 and NOT have to manually input all of my times... (yes, I'm lazy :()
 
Your computer might have an internal microphone. Shut that one down and put up the volume of your microphone input. Be sure to set CCT to get the right input (the port) from the microphone. (Microphone = Stackmat Timer, except for the first one)
 
Your computer might have an internal microphone. Shut that one down and put up the volume of your microphone input. Be sure to set CCT to get the right input (the port) from the microphone. (Microphone = Stackmat Timer, except for the first one)

Okay, there's two options for the "mixer" that are choosable atm:
Primary Sound Capture Driver (doesn't work)
and Realtek HDA Primary input (also doesn't work, but corresponds to the "microphone jack" in the settings and Audio Devices in my Control panel.

There's a whited-out option for a Port mixer for HDA primary input, but i have no idea how to enable it.

I'm not sure what you mean by "the port" from the microphone -- I plugged it into the microphone jack on the side of my laptop, as shown in the vid... ><
 
It should be the Realtek HDA Primary input. Adjust the volume until the CCT can get a response. Also there should be an option about the frequency or something.
 
that's really weird

is the cable stereo? did you try to plug it just halfway? maybe it will work

did you set the recording volume options? you can mute the microphone (I did that, since it makes an annoying noise), but you have to have it ready for recording

(also the 165.165.15 thing appears on cct, not on your stackmat timer)
 
I had problems with my stackmat working on CCT as well, until I changed the adapter. I thought it wasn't the problem since it's newly bought but after I bought another one, it worked. But that might not be your problem.
 
be sure ur CCT is set to the correct mixer.

and try push the adapter at ur stackmat end, sometimes its just the adapter is not tight enough on the stackmat

one last thing u can try, if u have a device management program on ur computer, check out if the stackmat(appears as a microphone) is being recognized by ur computer.
 
Interesting development.

I changed the stereo settings from "Input" to "Audio Input", now it seems to work, but it keeps giving me 0.02 times on both my stackmat and the CCT timer... resetting itself every second. How do I stop this from happening??

(it also asks me to confirm time of 0.02 seconds (or 15 minutes) every second, so i keep having to press escape to get rid of the darn thing)

Whenever I turn the timer off, CCT stops screwing around, the second i press "Power", it starts chugging out times of like 0:165.165 and 15:00.00 whenever I change the boxes...

I adjusted the audio input settings but NOTHINGS WORKING NOW (whenever I turn it on red dots flash at the bottom left and right of the timer section and it's seemingly sensitive because when i start the timer for REAL it stops messing around on the timer, but only the first 50 milliseconds or so is shown on the screen).

Now I can't turn the darn thing on... o_O man...
 
Last edited:
I have the same problems as the ones you've got in your first post. Any sugestions?
Here is a picture of my cct configuration: http://bildr.no/image/403278.jpeg

The option in red text is norwegian for "Primary driver for audio input/recording".

The picture is too small to view. Perhaps if you use an image editor that allows full-screen screenshots??

-- I still haven't gotten it working, I've given up for now, and gone back to hand-calculating averages, standard deviation, variance, etc... but I'll probably go to the store and buy some Stereo cables + a 2.5->3.5 converter tomorrow...

Does anybody know if they use a specific brand of cable? Maybe I'll try some...
 
Back
Top