wtf

apwhitelaw

Regular
Joined
Dec 16, 2008
Messages
52
This V-Cube 6 is a piece of ********.

Just got it a couple of hours ago. Few minor pops. Then I got like 4 pieces to come out in one pop, and while putting them back, I managed to **** up the rest of the cube, or at least the top half. I didn't pay to put this **** back together, and really, now that it got disassembled while I was still solving it, I don't know which corner goes where and I could put them in the wrong spot. And I WILL NOT take it apart to put it together in solved position. It already enough work with only half of the cube to put together.

Best ****ing $60 I've ever spent.
 
SO you're complaining because you fail at turning, assembling and visualizing corner positions?
 
Stop being a cry baby, and just figure out how to put it back together. It isn't hard. And get used to the pops, because that's what happens. If you weren't aware of that it's your fault for not looking around before you spent $60 on a cube. Either way, dissing V-cubes is not gonna go down around here.
 
I KNEW it was gonna pop. I KNEW I may have to do some reassembling. But I Don't know which corner goes where, and I'd rather not take it apart again after this. Also, any video I look at doesn't really tell me what to do.

"Take this piece and do blah blah blah" Well what the hell is "this piece"?



Also, about the corner pieces, well, see as the corner pieces are mixed up since I was trying to solve it, there is no way of know exactly where to put them.
 
Last edited:
On my v-6 you can twist a corner while it is assembled without popping a piece, so it shouldn't matter because of orientation, and permutation should be taken care of because of parity. While it is dissasembled, mod it with the memyself&pi 6x6 mod (look on youtube).
 
For corners, all you have to do is make sure the orientation is solvable without twisting a corner. As long as that is true, the entire cube will be.
http://cubefreak.net/BLD/3OP_guide.html#CO
The sum of corner orientations (where correct=0, cw=1, ccw=2) of the eight corners is always divisible by 3.

Sorry but I have no idea what your talking about, either of you.

On the 6x6, nothing matters but the corners.
Everything else can be solved.

You can just reassemble randomly without caring about the other pieces other than corners.
 
For corners, all you have to do is make sure the orientation is solvable without twisting a corner. As long as that is true, the entire cube will be.
http://cubefreak.net/BLD/3OP_guide.html#CO
The sum of corner orientations (where correct=0, cw=1, ccw=2) of the eight corners is always divisible by 3.

Sorry but I have no idea what your talking about, either of you.

Learn to read?
I gave you the link...
The solved state is where the sum of all the orientions = 0 according to the 3OP definition. If you do a sune, you get 1+ 1+ 1 (twisted 3 corners clockwise). That adds up to 3. If you do triple sune, 1+2 (twisted a corner CW and the other CCW). It always works. Twisting a single corner is just impossible and you know it isn't solvable.
So just set your cube down and look at all the corners +0 for correct orientation, +1 for cw, +2 ccw, and at the end, your sum+x is divisible by 3, where x is the orientation of the missing corner.

Cubing used to be an activity for people who like to think...
Now it's just for zombies with fingers.
 
For corners, all you have to do is make sure the orientation is solvable without twisting a corner. As long as that is true, the entire cube will be.

For corners, all you have to do is make sure the orientation is solvable without twisting a corner. As long as that is true, the entire cube will be.
http://cubefreak.net/BLD/3OP_guide.html#CO
The sum of corner orientations (where correct=0, cw=1, ccw=2) of the eight corners is always divisible by 3.

Sorry but I have no idea what your talking about, either of you.

On the 6x6, nothing matters but the corners.
Everything else can be solved.

You can just reassemble randomly without caring about the other pieces other than corners.

Yeah I know that, but since I'm not reassembling from scratch, but from a point at which I was trying to solve it, I do not know where the corners go and can't find out.
 
For corners, all you have to do is make sure the orientation is solvable without twisting a corner. As long as that is true, the entire cube will be.

For corners, all you have to do is make sure the orientation is solvable without twisting a corner. As long as that is true, the entire cube will be.
http://cubefreak.net/BLD/3OP_guide.html#CO
The sum of corner orientations (where correct=0, cw=1, ccw=2) of the eight corners is always divisible by 3.

Sorry but I have no idea what your talking about, either of you.

On the 6x6, nothing matters but the corners.
Everything else can be solved.

You can just reassemble randomly without caring about the other pieces other than corners.

Yeah I know that, but since I'm not reassembling from scratch, but from a point at which I was trying to solve it, I do not know where the corners go and can't find out.


*facepalm*

You DONT know that obviously, because if you did, you wouldnt have posted.
We have been trying to tell you how to fix it, and provided links.

Maybe if you READ the links, youll find out.
 
For corners, all you have to do is make sure the orientation is solvable without twisting a corner. As long as that is true, the entire cube will be.

For corners, all you have to do is make sure the orientation is solvable without twisting a corner. As long as that is true, the entire cube will be.
http://cubefreak.net/BLD/3OP_guide.html#CO
The sum of corner orientations (where correct=0, cw=1, ccw=2) of the eight corners is always divisible by 3.

Sorry but I have no idea what your talking about, either of you.

On the 6x6, nothing matters but the corners.
Everything else can be solved.

You can just reassemble randomly without caring about the other pieces other than corners.

Yeah I know that, but since I'm not reassembling from scratch, but from a point at which I was trying to solve it, I do not know where the corners go and can't find out.

Are you really serious? I mean like, do you even understand the simple concepts of a Rubik's cube? Parity for example? The reason why every state isnt solvable? You dont even seem to understand how to calculate if the corners are gonna be solvable even with all the help we just gave you. Just try and find out by yourself. Seriously, people need to stop whining and learn how to do things on their own.
 
For corners, all you have to do is make sure the orientation is solvable without twisting a corner. As long as that is true, the entire cube will be.

For corners, all you have to do is make sure the orientation is solvable without twisting a corner. As long as that is true, the entire cube will be.
http://cubefreak.net/BLD/3OP_guide.html#CO
The sum of corner orientations (where correct=0, cw=1, ccw=2) of the eight corners is always divisible by 3.

Sorry but I have no idea what your talking about, either of you.

On the 6x6, nothing matters but the corners.
Everything else can be solved.

You can just reassemble randomly without caring about the other pieces other than corners.

Yeah I know that, but since I'm not reassembling from scratch, but from a point at which I was trying to solve it, I do not know where the corners go and can't find out.

Are you really serious? I mean like, do you even understand the simple concepts of a Rubik's cube? Parity for example? The reason why every state isnt solvable? You dont even seem to understand how to calculate if the corners are gonna be solvable even with all the help we just gave you. Just try and find out by yourself. Seriously, people need to stop whining and learn how to do things on their own.

OK seriously its been like 5 minutes since you guys posted links. I haven't even had time to read it.
 
Back
Top