Meffert's Megaminx is in stock! Even in white!!! (also other puzzle-related news)

I never knew my puzl.co.uk minx was so good!

actually all products made by puzl are good
made or sold?

And all Mefferts MegaMinxes are horrible when you buy them and I have had to reglue at leas half of my tiles.

If you ever touch Eriks ore Stefans Minx you will understand why they are considered the best Minxes, but if you go by the way Mefferts are sold...... fail indeed
 
If you ever touch Eriks ore Stefans Minx you will understand why they are considered the best Minxes
Erik's is much better than mine (though that's not the reason he's so much faster). Hey, which were those very good ones again that you made me aware of while scrambling in Aachen?
 
i fitted my puzl.co minx with type E screws and springs.(2 springs a center) and now it can't pop anymore.

It sounds like your puzl.co.uk minx used to pop prior to your modification: is that the case? :confused:

I ask this because my unmodified (other than lubed) puzl.co.uk minx (a "PVC" minx?) hasn't ever popped once which I attribute more to the shape of the pieces rather than the tightness of the screws or the springiness of the springs.

With regards to my new Mf8 tiled minx, I'm most interested in the actual differences between the original Meffert's and the Mf8 as I consider it a bit of a travesty that Meffert's.com should supply an inferior rip-off of their own product for the full price without labelling it as such. I still don't own a genuine Meffert's minx (much to my annoyance) so I can't really establish if it is indeed inferior so I'm relying on the various snippets of information around (e.g. http://twistypuzzles.com/forum/viewtopic.php?f=1&t=10497).

I think I'm resigned to doing a serious overhaul of this Mf8 including sanding of edges, re-positioning tiles, etc. :mad:
 
Not that I have any of the megaminxes that are spoken of in this thread, Thrawst has just posted a video on YouTube of his new Mf8 Megaminx. It appears to be okay; I think he may may have said it pops a bit but other than that it looked good.

P.S. This is a rushed post; I'm eating ice cream you know!
 
Gah, but where did Clement get them? You asked, didn't you?
That megaminx is the new supernova, Clément got several of them at Hungarian Open. I bought one from him in Geneva and I will bring it at Benelux Open, if you want to try it, no problem.
And yes it's a good megaminx. But I'm still faster with my chinaminx :p
 
i fitted my puzl.co minx with type E screws and springs.(2 springs a center) and now it can't pop anymore.

It sounds like your puzl.co.uk minx used to pop prior to your modification: is that the case? :confused:

I ask this because my unmodified (other than lubed) puzl.co.uk minx (a "PVC" minx?) hasn't ever popped once which I attribute more to the shape of the pieces rather than the tightness of the screws or the springiness of the springs.

no with the original screws it didn't pop. but i first fitted type A screws/springs. but then it started to pop a little bit. but now with the DS screw/springs it's super.
 
no with the original screws it didn't pop. but i first fitted type A screws/springs. but then it started to pop a little bit. but now with the DS screw/springs it's super.
Ah cool, thanks for the clarification.

Right, I'm back home with the mf8 and I have it disassembled under interrogation spotlights :) The assembly is very poor with some screws real tight and others much too loose. The ends of the springs are quite rough and could do with sanding to reduce that clanky noise when turning. Photos to follow if I can find a working camera.
 
Core and centres...
IMG_0022.JPG

Centre, screw, spring and washer...
IMG_0023.JPG

Core...
IMG_0025.JPG

Assembly...
IMG_0027.JPG

The superglue marks can be seen on most tiles...
IMG_0028.JPG

The placement on this Green-White-Red tile is really bad...
IMG_0029.JPG


I have it tightened up quite a bit but it's still exploding all over the place!
 
Last edited:
msemtd, at first my MF8 minx was bad too, exactly like your description. Make sure the tension is ok and then lube it. It makes a REALLY big difference on these minxes ;).

Thanks Jacco, I'm a bit less dismayed now I've spent a few solid hours playing with it. I must say that the Megaminx is one of my favourite puzzles to solve and I'm loving the extra grip that the tiles provide. Some of the colours on this one can be quite difficult to track, especially with two yellows and an orange - I'm constantly thinking out loud "where's the orangey-yellow and pale-green edge? No, that's the pale-yellow and dark-green!".

As for the popping issue, I think I'll be spending a lot more time on it this weekend. It's clear that the retaining lugs on the mf8 corner pieces are just way too small for the amount of play afforded by so many sprung centres. The puzl minx has a extra ridge on the corners that hooks onto the edge pieces which I'm sure is a huge improvement (assuming the puzl/PVC/PET design post-dates the Meffert's mouldings that is). I'm going to tighten it up again but as some of the screws seem dangerously loose they will require some thread-lock.
 
How large are these compared to a Tomy, Meffert's, and PVC Megaminx puzzles?
I have some stickers laying around and I think I'd like stickers better than tiles (especially if the tiles fall off and the colors are too much alike)
 
Back
Top