Older cubers discussions

[phreaker]

The 354 is still new for me but as a general rule I only use light silicone lube (Lubicle Speedy has been my go-to) and DNM in my 3x3s. I like low effort turning and it seems like any time I've used anything heavier I've regretted it. Lower viscosity silicone lubes will dry out faster and may require more frequent reapplication. Seems like it does coat the pieces still and "reactivates" with a couple drops of DNM. Dry and crisp is perfectly fine for me as long as it's fairly fast and controllable still.

You might also swap out for the green GES and see if that suits you more.

When I got the cube, it was stupid fast and uncontrollable for me, the thought of solving BLD on it was scary.

Now, it is very controllable. A *hair* slow, which is not something I hear people say about 354s. So I'm happy where I am. I may throw a touch of DNM in it, or dignitas to speed it up, if I want that. I don't want much more speed.

The corner cutting is so nice... I'm actually considering learning OH BLD. Just need to learn the needed perms. (note: I don't use table abuse... so OH BLD knowing M2 is a bit entertaining. ) Finally learning the u/u' setups for the outside of the edges makes it possible to do.

 

[Old Tom]

My first 7x7x7. Just received. Not tried yet.
View attachment 9481

Scary just to look at! (For me.)

 

[Sergey]

Scary just to look at! (For me.)

It's only at first look. When you know how to solve 4x4 and 5x5 all others are easy. Of course, it is not so simple to achieve an acceptable speed. Anyway this cube is fantastic. Very pleasant, smooth and easy turning. Layers just glides over each other. Unfortunately this one is not without manufacturing defects ;(

 

[phreaker]

It's only at first look. When you know how to solve 4x4 and 5x5 all others are easy. Of course, it is not so simple to achieve an acceptable speed. Anyway this cube is fantastic. Very pleasant, smooth and easy turning. Layers just glides over each other. Unfortunately this one is not without manufacturing defects ;(

What is wrong with it? I'm considering getting a Hays 7M when they get to zcube.hk.

 

[Sergey]

What is wrong with it? I'm considering getting a Hays 7M when they get to zcube.hk.

Scratches over all cube definitely are common for stickerless cubes and it is not a problem. But additionally to this, mine has defects on two corners. One contains relatively deep whitish scratch on blue side but I think it may be polished. The second one is worse. Seems like casting problem or defect that was glued over. Sharp edge on it causes discomfort during solve.

 

[phreaker]

Scratches over all cube definitely are common for stickerless cubes and it is not a problem. But additionally to this, mine has defects on two corners. One contains relatively deep scratch but I think it may be polished. The second one is worse. Seems like casting problem or defect that was glued over. Sharp edge on it cause discomfort during solve.
View attachment 9482View attachment 9483View attachment 9484View attachment 9485

Most stickerless cubes I get have a few little scratches at most. I'd consider that a problem. I'd talk to the people who sent it to you. That is supposed to be the best 7x7 on the market, and Yuxin cubes are usually very smooth and precise.

 

[Sergey]

Most stickerless cubes I get have a few little scratches at most. I'd consider that a problem. I'd talk to the people who sent it to you. That is supposed to be the best 7x7 on the market, and Yuxin cubes are usually very smooth and precise.

My cost about $36. Already sent request to seller.

 

[phreaker]

My cost about $36. Already sent request to seller.

$36? Where'd you get that?!

 

[Sergey]

$36? Where'd you get that?!

It's without delivery, about $43.8 total. here

 

[phreaker]

It's without delivery, about $43.8 total. here

Ok... For the other cubes in my order... I'm cheaper at zcube. So I'll wait for them to stock it.

 

[Sergey]

Ok... For the other cubes in my order... I'm cheaper at zcube. So I'll wait for them to stock it.

There were no many choices at that moment. Now there are more sellers and price may drop.

 

[newtonbase]

There's a new Facebook group called Senior Cubers Worldwide. I've added everyone here that I'm friends with (I think) but don't feel obliged to take part. If there's anyone else who fancies joining here's the link
https://www.facebook.com/groups/1604105099735401/

 

[newtonbase]

Was the photo of us oldies with Professor Rubik at the WC public on this site? I wanted to link to it on the Facebook group? I'll check with everyone first of course.

 

[Sergey]

Already sent request to seller.

The seller answered that he has some note from Yuxin that such defects are normal, easy-peasy. Glued patch on the flagship cube. Well. Will contact Yuxin directly about this... Interesting, is there any kind of RMA at Yuxin.

 

[SpartanSailor]

There's a new Facebook group called Senior Cubers Worldwide. I've added everyone here that I'm friends with (I think) but don't feel obliged to take part. If there's anyone else who fancies joining here's the link
https://www.facebook.com/groups/1604105099735401/

I sent a request to join the group... thanks!

 

[newtonbase]

I sent a request to join the group... thanks!

You're in!

 

[h2f]

There's a new Facebook group called Senior Cubers Worldwide. I've added everyone here that I'm friends with (I think) but don't feel obliged to take part. If there's anyone else who fancies joining here's the link
https://www.facebook.com/groups/1604105099735401/

I think thats a great idea. Thanks Mark.

 

[mafergut]

There's a new Facebook group called Senior Cubers Worldwide. I've added everyone here that I'm friends with (I think) but don't feel obliged to take part. If there's anyone else who fancies joining here's the link
https://www.facebook.com/groups/1604105099735401/

I just requested to join! Good idea

 

[Sergey]

Which alg you're using for 7x7x7 "double parity" (XOXOX)? Trying to adapt XXOXX.

 

[pglewis]

Serious respect for all you OH solvers out there, btw. I really don't care for it, personally, but I do practice it while walking home with my daily coffee. Replacement GTS2M corner ordered and on the way, may it rest in peace. I would not make a good juggler.