Hybridizing DianShengs??

abr71310

Veteran
Joined
Dec 3, 2008
Messages
562
Location
Toronto, Ontario
WCA ID
2009SHAO02
YouTube
Visit Channel
I just got my 3 DS cubes two nights ago, and lemme tell you, these are THE FASTEST cubes I've ever been able to turn; my times literally dropped 10 seconds on average...

On OH solves, I went from 1:30 to 1:01.xx in the SAME AVERAGE OF 5!!! (so easy to turn!) -- Plus, my hands don't hurt afterwards! (Damn storebought hybrids...)

Is there a way to hybridize these cubies (or use the core) to make an entirely new wickedly awesome DS hybrid? Would it work really nicely???

How would one modify the DS to make it turn at optimal speeds, that is neither too loose or too tight?? (measurements, anyone?)

Also, Two questions:
1) DS's: allowed at competitions? Why don't people use them? *sad face*
2) Can we use cubesmith stickers/tiles on DS cubes? How would they be put on?

A few things I've noticed:

DS cubes have sort of an extended "jagged" edge and corners, that jut out a little more that allow them to cut corners and still not pop as easily (they lock up a bit though, if my hands are shaky).

The "painted" stickers come off really easily (I thought they wouldn't!! :|) and I'm really disappointed that they don't have sort of the grooved texture that allows them to be restickered or tiled... -- So where and how would I replace the paint??

The core doesn't seem to "match" the rest of the cube -- yes, it's a grey plastic-y one, but I was like OMG how does it turn that fast??!?!?!

NOTE: Yes, as of right now this is my main speedcube and I will likely bring it to the CCC'09 if I don't get around to getting As/YUGA...

Is this a dream come true or is there something I'm missing about the DianSheng??
 
I just got my 3 DS cubes two nights ago, and lemme tell you, these are THE FASTEST cubes I've ever been able to turn; my times literally dropped 10 seconds on average...

On OH solves, I went from 1:30 to 1:01.xx in the SAME AVERAGE OF 5!!! (so easy to turn!) -- Plus, my hands don't hurt afterwards! (Damn storebought hybrids...)

Is there a way to hybridize these cubies (or use the core) to make an entirely new wickedly awesome DS hybrid? Would it work really nicely???

How would one modify the DS to make it turn at optimal speeds, that is neither too loose or too tight?? (measurements, anyone?)

Also, Two questions:
1) DS's: allowed at competitions? Why don't people use them? *sad face*
2) Can we use cubesmith stickers/tiles on DS cubes? How would they be put on?

A few things I've noticed:

DS cubes have sort of an extended "jagged" edge and corners, that jut out a little more that allow them to cut corners and still not pop as easily (they lock up a bit though, if my hands are shaky).

The "painted" stickers come off really easily (I thought they wouldn't!! :|) and I'm really disappointed that they don't have sort of the grooved texture that allows them to be restickered or tiled... -- So where and how would I replace the paint??

The core doesn't seem to "match" the rest of the cube -- yes, it's a grey plastic-y one, but I was like OMG how does it turn that fast??!?!?!

NOTE: Yes, as of right now this is my main speedcube and I will likely bring it to the CCC'09 if I don't get around to getting As/YUGA...

Is this a dream come true or is there something I'm missing about the DianSheng??

Use rubik's pieces with DS core and centers...it's supposed to be great.
Yes, you can use DS's in competition. You just apply the stickers/tiles over the paint or scratch off the paint and then apply :)
You don't have to have a groove to place the tiles or stickers in...just put 'em on :P For paint...I don't know, I don't think it's a good idea to paint your cube though.

Question: have you ever had a DIY before? If not, then there are other cubes to choose from...DS may not be the best cube for you, ya' never know.
 
Last edited:
Hi, I also use the Diansheng cube. However, I am not sure we have the same model. I have two different types: one had stickers on it when it came and the other had paint on the sides when it came. The one with stickers is the one that is ridiculously fast. If yours is the one that came stickered I would put an old type A core in it. After some breaking in it should be fine. If not, the an A core will still speed it up but it will lock a lot.

http://www.youtube.com/watch?v=VZsY67rWht8&feature=channel_page

The cube in the video is a stickered Diansheng with A core. You can be very aggressive with it and still not pop or lock up.

As for those questions, I am sure they are competition legal. If your Diansheng came stickered, just peel off the stickers and put new ones on. If they came painted, the stickers should cover up the paint, so either case there isn't really a problem :P
 
Of course there are good hybrids with the DS.
The Type F has light, soft pieces that cut corners well, and the Dian Sheng has nice centers that make cubes loose, while not popping. So naturally, they're an amazing combo. I use this combo (DS centers and core with Type F pieces) for OH, and it's really loose, light, cuts corners, and has low resistance; my hand never gets tired while solving OH. I don't use this hybrid for regular 2H, though, because I prefer a more solid, weighty feel to my cubes.
 
My DS I got from RubikFans was painted with normal pieces and I accidentally scratched off the paint the first day I had it (I thought the paint was more resilient). I used the abrasive side of a sponge to scratch off some of the paint to make the stickers straight. I tried an old Type A core in mine and it felt too "floaty", so I use the original core and I set it at a looser tension.
 
I have two of these (painted ones) I got from Rubiksfan. I love that its smooth and fast turning so I can see it being a good OH cube. I, like Jai, prefer a more solid feeling cube (like the type D). I have 2 of the stickered DS cubes coming any day now though.
 
DS is cube that is really worth it's money! That cube is awesome, built quality is very good. But stay away from painted version, because red/orange is really confusing. Though, this cube will be ok for beginner, who is searching for a good, cheap cube :)
 
Yeah, I just noticed while solving OH that the DS is really hard to distinguish between red and orange...
Hope i don't screw that up in comp (I have painted, btw); might just put stickers right over em...


Are the stickered DS's really that much more worth it???

Might look into getting some after my A's / YUGA arrives. :D

Thanks for the information, all!!! (DS's are great for OH ALONE -- hybrids = better?!?! WOW!)

Where do you get a type f, btw? o_O
 
Yeah, I just noticed while solving OH that the DS is really hard to distinguish between red and orange...
Hope i don't screw that up in comp (I have painted, btw); might just put stickers right over em...


Are the stickered DS's really that much more worth it???

Might look into getting some after my A's / YUGA arrives. :D

Thanks for the information, all!!! (DS's are great for OH ALONE -- hybrids = better?!?! WOW!)

Where do you get a type f, btw? o_O

cube4you (message too short)
 
Ehhh I might get some Fs later, but I mean I wanna wait until my As/YUGA come in because I hear they make great cubes and are good for hybridizing...

After I get those, I will have: (help me hybridize!!! / choose what other cubes to get)

Eastsheen 2x2x2 (LOL IRRELEVANT (but I love it still))
Storebought 3x3x3 Core (vaseline-d somewhat)
Storebought 3x3x3 pieces (Lubed with silicone -- CRC, NO VASELINE).
--Stickers to pieces in better quality than core, may scrap core in favour of buying another one...

Type A x 2 (B/W)
YUGA
2x DS Painted
DS (NIB, will open later...) -- "Old Brand?" (RubiksFan on eBay -- NOT light, NOT stickered).
 
Back
Top