MoYu Weilong GTS V2 Review

hi,
So today I received my gts 2 in stickerless. Will upload unboxing if I have time.
I will get into basics. The feel is a mix of gts v1 and valk, really smooth and some resistance. It also feels quite papery but this is a common trait for moyu stickerless cubes. Really good, very uncontrollable so i slowed it down with lube (traxxas 50k, i think i put a tiny bit too much so it feels a little gummy), also i put in gts v1 springs, i might try original weilong soon. Corner cutting isn't as good as I'd like it to be, it can cut 45 but it's a downgrade from the original. Much more stable than the original but unstable relative to the valk. When I disassembled it the corners looked like a mix of valk and gts v1. And the edges were pretty much the same as the original gts but with added wings for stability. i will be putting some n50 4x2mm into it, if i can find a place that sells n42 i will get those. At this point in time it's not guaranteed to be my main but it has a very high chance.

N50s will feel fairly strong in this cube. I made one of mine with N38 4x2 and to me has about as strong a magnetic pullforce as you'd ever need in a cube. I may however do one with N42s as well. gaussboys.com sells both the N38 and N42 magnets and they're really high quality.
 
N50s will feel fairly strong in this cube. I made one of mine with N38 4x2 and to me has about as strong a magnetic pullforce as you'd ever need in a cube. I may however do one with N42s as well. gaussboys.com sells both the N38 and N42 magnets and they're really high quality.
Will 4mmx2mm n35 magnets be too weak? Will it have the same effect as n35 on the Valk 3?
 
Will 4mmx2mm n35 magnets be too weak? Will it have the same effect as n35 on the Valk 3?
I think you could actually use the N35s with good results in this cube. Since I ordered five of these cubes I think I'll do at least one in 35s as well. I don't know why it is, but with the magnets I use, there seems to be kind of a big step between 35 and 38. The N38 often seems to turn out stronger than I had anticipated. Anyway I bring this up because as soon as I started doing initial turns on my newly magnetized N38 GTS2, it occurred to me that some people might like N35s in it particularly if they prefer a more subtle magnetic feel. Though I haven't tried them yet, the 35 in the GTS2 may have a similar feel to the same magnet in the Valk. The interesting thing about the GTS2 is that it has a lighter airier feel than the Valk.
 
Will you be making a video on how to make a Magnetic Weilong GTSV2 or something related to magnetic Weilong GTSV2? I luv ur videos, keep up the good work!
 
Will you be making a video on how to make a Magnetic Weilong GTSV2 or something related to magnetic Weilong GTSV2? I luv ur videos, keep up the good work!
Thanks so much! Yes, I shot all the video today. Just have to edit and compile it. It's really an easy, straight forward magmod. I hope to have it up tomorrow night or Tuesday at the latest. Thanks for watching, I appreciate it!!! There are starting to be a lot of magnetic cubing videos on YouTube!
 
So N38s-N42s will work best. I'm just wondering if it was the GTS springs or the original Weilong springs?
The springs feel light. I haven't investigated yet, which springs they are. But I have done three magnetic GTS2 cubes already. One with N35, one with N38, in in about an hour, I will be finishing my cube with the N42 magnets in it

So far I like the N38s best, but thats a bit premature. Still need to give the N42 cube a work out once the glue has dried.
N35s are quite light in the cube but still have a positive magnetic effect, so that's nice. I could see some people preferring the lighter feel of the N35 cube. They're very close to the feel of N35s in the Valk with perhaps just a slight step down in magnetic strength. The interesting thing about the GTS2 is you really don't need its tensions set loose. So keeping things tighter in on the GTS2 seems to make the magnets a little more noticeable. In other words, if the N35s feel too subtle, bringing in the tensions seems to help.
It's weird but the particular N38s which i use (all the time) are probably a bigger step up, strengthwise, from N35 then you'd expect. You'd think going from N35 to N38 would be a small step in strength, but it's actually a little bit bigger step than that. The step between N38 and 42 is subtle. The step between N48 and 52 is more noticeable.
 
So N38s-N42s will work best. I'm just wondering if it was the GTS springs or the original Weilong springs?
Overall, I think the grade in 38 will have a more wide appeal. The magnets are noticeable, they're medium strong, yet the cube remains smooth and quick. The N42's are very similar but have a little more of a "bump". If I can figure out how to do it, I will upload a photograph showing a magnetic field imprint on magnetic viewing film. You'll see that the 42 cube has a more defined magnetic field indicated by it's lighter and darker areas when compared to the 38 cube. This is very interesting, because sometimes strength wise, the magnets feel very close to being the same.
 

Attachments

  • IMG_2431.JPG
    IMG_2431.JPG
    506.5 KB · Views: 18
And here is a visual comparison of the magnetic fields of the N35 GTS2 (left) and the N38 GTS2 (right).
 

Attachments

  • IMG_2438.JPG
    IMG_2438.JPG
    447.5 KB · Views: 26
I got my stickerless GTS2 yesterday, and although the turning is great, it is probably a bit better for someone who has a lighter turning style, as the cube is very fast. The magnetized version will probably fix this. This is completely personal preference, also, but my recognition isn't quite as good on stickerless cubes. As a result, my times on the stickerless version are around 3% worse, but this will become my backup main and I'd consider switching if my turning style changes. My current main is the Valk 3, not magnetized.

Overall review:
★★★★★

Also posted on thecubicle.us (where I got the cube from)
 
Overall, I think the grade in 38 will have a more wide appeal. The magnets are noticeable, they're medium strong, yet the cube remains smooth and quick. The N42's are very similar but have a little more of a "bump". If I can figure out how to do it, I will upload a photograph showing a magnetic field imprint on magnetic viewing film. You'll see that the 42 cube has a more defined magnetic field indicated by it's lighter and darker areas when compared to the 38 cube. This is very interesting, because sometimes strength wise, the magnets feel very close to being the same.
So N40 could be good? I have rougher turning style but I don't like the magnets too strong or too weak. The magnets on gaussboys is too expensive + the worldwide shipping. Is there another place where I could get N38 or N40 which as cheaper shipping and magnets? I've got a YAN 3 M with N35. Would it feel like the GTS2 with N35 or would the GTS2 feel weaker than my YAN 3 M? I reckon my YAN 3 M needed a bit stronger magnets.
 
So N40 could be good? I have rougher turning style but I don't like the magnets too strong or too weak. The magnets on gaussboys is too expensive + the worldwide shipping. Is there another place where I could get N38 or N40 which as cheaper shipping and magnets? I've got a YAN 3 M with N35. Would it feel like the GTS2 with N35 or would the GTS2 feel weaker than my YAN 3 M? I reckon my YAN 3 M needed a bit stronger magnets.
I really don't know of any other reliable source for N38 magnets, or N40. Have you tried emailing Gaussboys to inquire about shipping?
I wish I still had my Yan. I gave it away soon after magnetizing it, but the N35s are a little subtle in the GTS2. To me, the N38s are perfect- not too strong, not too weak.
 
My magnets arrived today! :) So I will practise with Warrior W, and then magnetise my gts2 with n35. I don't have much of a rough turning style so I think n35s will be fine in the gts2.
 
Back
Top