2x2 anchor pieces

Aaron Lau

Veteran
Joined
May 23, 2015
Messages
366
why do 2x2 have anchor pieces?
or have something to hold a corner in place and prevent it from moving?
 
The core could go out of alignment with the corner pieces causing the puzzle to lock up. If you turned it without an anchor piece on both sides, the core would slide out of alignment.
 
im trying to see how that works but i cant really see that

Grab a 3x3x3 and turn it like a 2x2x2, but only hold the corners (don't touch the centers or the edges). After a few turns you can't do an adjacent turn, because the middle layers are not aligned properly. But if you "glue" one single corner to its three adjacent edges (not all of the corners, just with one!), the middle layers will always move with the corners, and you have no lock ups. So, something similar happens inside a 2x2x2.
 
Grab a 3x3x3 and turn it like a 2x2x2, but only hold the corners (don't touch the centers or the edges). After a few turns you can't do an adjacent turn, because the middle layers are not aligned properly. But if you "glue" one single corner to its three adjacent edges (not all of the corners, just with one!), the middle layers will always move with the corners, and you have no lock ups. So, something similar happens inside a 2x2x2.

ahhhh i see now.
Thanks for clearing that up
 
Grab a 3x3x3 and turn it like a 2x2x2, but only hold the corners (don't touch the centers or the edges). After a few turns you can't do an adjacent turn, because the middle layers are not aligned properly. But if you "glue" one single corner to its three adjacent edges (not all of the corners, just with one!), the middle layers will always move with the corners, and you have no lock ups. So, something similar happens inside a 2x2x2.

Wait..... if 3 core pieces lock a corner in place, doenst that mean it cant move? If the R U and F faces cant move doesnt that mean if u do a R or R' it's actually moving the L face?
 
Wait..... if 3 core pieces lock a corner in place, doenst that mean it cant move? If the R U and F faces cant move doesnt that mean if u do a R or R' it's actually moving the L face?

Let's say you want to turn a 3x3 like a 2x2. You have to lock the middle layer turns (M, E, S) so you glue one corner's adjacent edges to the corner. Let's say that corner is DBL. In this case, you can turn only R, U, F, Lw, Dw, Bw, but you cannot turn any L, D or B.

Actually, you can think that the DBL corner never moves. If you do an L turn on a 2x2, that is just an Lw turn in the 3x3 analogue above, so you actually did an (R x') move. But on a 2x2 it doesn't really matter.

If you have such a 2x2 that you can see the center screws inside, like this, you can see that the screws (centers) are always moving together with one particular corner! You can determine your corner which fixes the middle layers.
 
Let's say you want to turn a 3x3 like a you'reYou have to lock the middle layer turns (M, E, S) so you glue one corner's adjacent edges to the corner. Let's say that corner is DBL. In this case, you can turn only R, U, F, Lw, Dw, Bw, but you cannot turn any L, D or B.

Actually, you can think that the DBL corner never moves. If you do an L turn on a 2x2, that is just an Lw turn in the 3x3 analogue above, so you actually did an (R x') move. But on a 2x2 it doesn't really matter.

If you have such a 2x2 that you can see the center screws inside, like this, you can see that the screws (centers) are always moving together with one particular corner! You can determine your corner which fixes the middle layers.

Yeah thats what I thought. So basically when you do an L move, you're actually moving the R face along the R screw.
So doesnt that mean you dont have to lube the core pieces that lock the corner in place?
 
Yeah thats what I thought. So basically when you do an L move, you're actually moving the R face along the R screw.
So doesnt that mean you dont have to lube the core pieces that lock the corner in place?

Not sure, but probably not. :) But since lube can go anywhere inside, I think you should just lube everything.

If you see this video, you can see that there are 3 edge pieces that differ from the others. They have little wings; with that they are holding to the centers, so they are fixed. And the three edges must be adjacent! So, technically, it's not the corner, but its adjacent edges which are fixed to the centers.
 
Not sure, but probably not. :) But since lube can go anywhere inside, I think you should just lube everything.

If you see this video, you can see that there are 3 edge pieces that differ from the others. They have little wings; with that they are holding to the centers, so they are fixed. And the three edges must be adjacent! So, technically, it's not the corner, but its adjacent edges which are fixed to the centers.

Yeah but because they lock the centers in place it doesnt change the face that they cant move.
 
Back
Top