THE Type F-II Review

koreancuber

Master
Joined
Jan 31, 2010
Messages
1,089
Location
Seoul, Korea, South Korea
YouTube
Visit Channel
Pictures
P1030744.jpg

P1030746.jpg

P1030747.jpg

P1030748.jpg

P1030749.jpg

P1030750.jpg

THE REVIEW

Smoothness (9.3/10) : Although the GuHong wins almost every cube in smoothness, the F-II is also rated as a very smooth cube. But unlike the Ghosthand (which is smooth and real quiet) the F-II has a slight click to it (I'm sure breaking it in will help).

Speed (9.6/10) : The F-II is mainly known for it's fast speed. Compared to the Haiyan Memory (Alpha 5), the F-II is only slightly faster. One bad thing about the cube is that because of it's lightweight, smoothness and speed, the cube overshoots time to time, which cause lockups.

Corner cutting (8.7/10) : Because the cube (like most other cubes) does not have backward corner cutting, it is a bit hard to adjust (when using the GuHong). The forward corner cutting can cube definitely over 40 degrees. Also, I think the corner cutting isn't effected very much, when tightened/loosened (mine is slightly loose)

Stability (popping, overshooting frequency) (8.2/10) : It popped on me already.. TWICE. I'm sure tightening would help, but I can't do that just yet (I'll explain later). Popping is mostly caused, in my case, due to forced backward corner cutting attempts. The cube is definitely more stable than the GuHong (too much overshooting), but it falls a bit lower than the Haiyan Memory (no overshooting). So if you hate the GuHong because it's too unstable, and you don't like the Memory because it's too stable, get the F-II.

Lock-up resistance (8.5/10) : Because of it's low stability (overshooting), lock ups are caused occasionally, and they are pretty bad. (I have 1~2 second lockups sometimes, which pretty much ruins the solve because it makes you 1) loose your tempo 2) loose your mindset 3) completely knocks off you look ahead.

Quality (0.1/10) : I really HATE this kind of plastic. It's thinner than the usual plastic that cubes are made with, and it feels cheap. The caps fall off too easily (which I can fix).

Quietness (9.5/10) : It falls a little behind the guHong (9.6/10), but it's no problem for me, nor should it to anyone else (I even like the sound of the Haiyan memory).

Feel : The cube feels smooth, a bit crispy, a bit clicky. Also, the cubies are round, and that's a bit different from the Alpha 5 and GuHong.

OVERALL

Pros : Fast, smooth, corner cutting is good, only locks up occasionally, more stable than the GuHong, doesn't pop that often (if you have it tighter than mine)

Cons : Lock ups do occur, can pop when you attempt to backward corner cut, the caps fall off easily, overshoots sometimes, feels cheap.

MY STORY (this might just be blah blah blah to some people)

So I've keep on mentioning the backward corner cutting, Guhong and stuff, and here's something I want to tell you guys. The GuHong is a great cube. It's only problems are that it is too unstable and that it can backward corner cut (I'll explain now). This causes us to change our style of cubing (at least mine), to a much more rough style of cubing (I've noticed my solves AND compared them with solves before I got the GuHong). What I wanted to point out, is that this causes me not to use other cubes, because they pop/lock up more often, because of my changed style... so a warning to the GuHong lovers. BEWARE, the cube might be damaging your cubing style (well, it doesn't matter if you don't care)
 
Last edited:
I disagree with quite a lot here O_O
I don't feel any click in my F2, and it has a kind of buttery feel.
It almost never overshoots for me, and doesn't really lock up.

*I'm talking about an F2 in its prime, mine is starting to die :(
 
The only thing I don't like about the F-II is that the caps fall off really easily. That can be remedied with some blue tac.
 
The FII isn't NEAR as "fast" as a GuHung. You either used a different lube in the GuHong, have it set far too tight, or haven't lubed it enough/at all. My FII is a lot more "smooth" than fast. The GuHong reminds me of the alpha cubes in terms of "fast." My unlubed mini alpha is so ridiculously fast, and has never popped on me, but I still prefer my FII because it's smooth. The FII can't cut as far as a GuHong (mine can cut 55deg easily, I'm sure if I loosened it up it'd be 60+ but then it would be too fast for me), but my FII still cuts over 40deg and that's definitely more than ample. My FII can also backward corner cut almost as much as forward, so I'm more than pleased.

I see a significant different in "feel" of FII and GuHong. Speed and smoothness are completely different in each cube and I feel that gives the overall feel completely different (not to mention the GuHung is a very lightweight cube as well)
 
My F-II

Smoothness: 9.9/10
Speed: 9.6/10
Corner cutting: 45 degrees
Reverse cutting: 20 degrees
Stability: 8/10
Lock ups: 9.5/10
Quality: 10/10
Silence: 9/10

GuHong > F-II > Haiyan Memory > Alpha V

I must have gotten lucky with my F-II because most reviews are worse than mine.
 
My F-II

Smoothness: 9.9/10
Speed: 9.6/10
Corner cutting: 45 degrees
Reverse cutting: 20 degrees

Stability: 8/10
Lock ups: 9.5/10
Quality: 10/10
Silence: 9/10

GuHong > F-II > Haiyan Memory > Alpha V

I must have gotten lucky with my F-II because most reviews are worse than mine.

Really? Not even the GuHong can do that.

My FII isn't clicky at all, still my favorite cube of the bunch.
 
Back
Top