How do you cap edges?

dillonbladez

Master
Joined
Nov 15, 2009
Messages
1,197
Location
Toronto, Ontario, Canada :)
WCA ID
2010CHAN03
YouTube
Visit Channel
I'm sorry if this has been already asked, but I couldn't find anything on the subject...

How do you cap edges? C4Y cubes come with the edge caps, to make their edges sealed. I want to do the same. I don't have materials like epoxy putty, or anything.
Would Lance's capping method work? The plastic goes over the piece, though, so I don't think it would work...

BTW: I want to do this to a storebought. I recently modded it and turned it into a DIY and I see great potential, and capping the edges should solve the lockups, more or less.
 
capping the edges should solve the lockups, more or less.

not really. the amount of material on the corners, and the spacing between the centers and inside of the corners is what causes lockups. Just 'observe' some lockups yourself.

IMO....just buy a DIY....no matter what you do to a storebought, it'll never be as good as other cubes.
Yes you can corner mod it (THAT solves most lock ups) but it still won't cut as much as a A5, or F2 or ghosthand for that matter.
 
capping the edges should solve the lockups, more or less.

not really. the amount of material on the corners, and the spacing between the centers and inside of the corners is what causes lockups. Just 'observe' some lockups yourself.

IMO....just buy a DIY....no matter what you do to a storebought, it'll never be as good as other cubes.
Yes you can corner mod it (THAT solves most lock ups) but it still won't cut as much as a A5, or F2 or ghosthand for that matter.

Most of my lockups are from the corners, or some other pieces (but what other than corners?) are catching on to the hollow parts of my edges.

Also, as I said, I have modded the cube, making it a DIY. I also said it has lots of potential. You underestimate storeboughts. I also have tons of DIYs... collecting ftw :) I really wish there was a way.. The cube was crap at first, and with tons of modding, it's great. I just need to fix my lockups problem.

BTW: Hopefully, this will give me something to do during the summer :)
 
If you have another spare storebought that you don't want, you could take the edges and shave it into a cap that fits the hollow and stops at the right place.
I did a similar mod for the YJ 4x4 corners using the foots, and it now doesn't pop anymore.

If you want i could draw a diagram for you later for how to make it.
 
If you have another spare storebought that you don't want, you could take the edges and shave it into a cap that fits the hollow and stops at the right place.
I did a similar mod for the YJ 4x4 corners using the foots, and it now doesn't pop anymore.

If you want i could draw a diagram for you later for how to make it.

That would be awesome.. except I don't have any other storeboughts. D:
Too bad Lance's capping method won't work for this.. I guess I'll just take some plastic and carve it into an edge cap, I guess. That's not very precise though... Any other suggestions?

The diagram would probably help, thanks Daniel :)
 
attachment.php


Bssically the red is what you should have in the end, and the blue is how much plastic you want to leave before the final sanding.
 

Attachments

  • edge.JPG
    edge.JPG
    22.1 KB · Views: 111
Last edited:
soo...you don't care about my diagram? I worked on it for a pretty long time to make it very precise...

oops, sorry, i've seen it, and liked it, thanks you very much, mr. daniel.
I just didn't visit for a while, so I didn't post...

The plastic sheet method wouldn't work for me, as daniel stated, so I guess I will have to try daniel's capping method or... ... ... yeah. lol, thanks guys :)
 
soo...you don't care about my diagram? I worked on it for a pretty long time to make it very precise...

oops, sorry, i've seen it, and liked it, thanks you very much, mr. daniel.
I just didn't visit for a while, so I didn't post...

The plastic sheet method wouldn't work for me, as daniel stated, so I guess I will have to try daniel's capping method or... ... ... yeah. lol, thanks guys :)

it's okay. i think i was also a bit too impatient :D

btw just so that you know, my diagrsm is how your caps will be like.

If you uses the same cube, you could just simply make it right at the original lines. But if you uses a different type, you need to leave more plastic so you could do minor adjustments to make it fit properly.
 
soo...you don't care about my diagram? I worked on it for a pretty long time to make it very precise...

oops, sorry, i've seen it, and liked it, thanks you very much, mr. daniel.
I just didn't visit for a while, so I didn't post...

The plastic sheet method wouldn't work for me, as daniel stated, so I guess I will have to try daniel's capping method or... ... ... yeah. lol, thanks guys :)

it's okay. i think i was also a bit too impatient :D

btw just so that you know, my diagrsm is how your caps will be like.

If you uses the same cube, you could just simply make it right at the original lines. But if you uses a different type, you need to leave more plastic so you could do minor adjustments to make it fit properly.
Too impatient? That diagram looks pretty precise to me o.0

I was also thinking of putting tape on the C4Y caps, but then that would just make it harder to get out, lol
 
soo...you don't care about my diagram? I worked on it for a pretty long time to make it very precise...

oops, sorry, i've seen it, and liked it, thanks you very much, mr. daniel.
I just didn't visit for a while, so I didn't post...

The plastic sheet method wouldn't work for me, as daniel stated, so I guess I will have to try daniel's capping method or... ... ... yeah. lol, thanks guys :)

it's okay. i think i was also a bit too impatient :D

btw just so that you know, my diagrsm is how your caps will be like.

If you uses the same cube, you could just simply make it right at the original lines. But if you uses a different type, you need to leave more plastic so you could do minor adjustments to make it fit properly.
Too impatient? That diagram looks pretty precise to me o.0

I was also thinking of putting tape on the C4Y caps, but then that would just make it harder to get out, lol

He means he was impatient waiting for a response.
 
Back
Top