What should i do with my V-5??

Rodrigo Piaggio

Premium Member
Joined
Sep 25, 2008
Messages
325
Location
Santiago, Chile
WCA ID
2009BERM01
YouTube
Visit Channel
Hi, my new V-5 have 4 layers-colour that turns very well but the other 2 layer turns like crap (a new storebougth turns better!!) since this cube dont have adjustable screws (they are ribets) i cant adjust the tension. I already do 3 days of rough breaking-in but still no difference (like 50+ solves). So, what should i do to make this 2 layers turn like the rest??????

Any suggestions?
 
Last edited:
Lube it? Sand it?

I forgot to say i already lubed with CRC, the layers with the problem show some improvement but still far away compared with all other layers. I unassemble the cube but i dont see anything weird to be sanded in this 2 particular layers. I think the rivets are too tight, is there a way to solve this issue??
 
Last edited:
I'd try sanding, and if that doesn't work, maybe put a little WD-40 in it, work it in quickly, and then disassemble and clean it really well. If neither of those works, I'd be happy to take it off your hands.;)
 
I'd wait to do it until someone more experienced than myself gives input, but if you put it in as a lubricant and then break it in some it eats some of the plastic. That's why you need to clean the cube really well after you do it, but I've heard it can dissolve some of the plastic and make the cube turn better, sort of like an accelerated break-in period. Don't take my word for it though, wait for someone good to chime in.
 
50 solves is not enough to fully break in a V-5. Keep solving.

Definately lube. CRC will work fine. If you have access to silicone oil, that is the best lube known at the moment.

I'd try sanding, and if that doesn't work, maybe put a little WD-40 in it, work it in quickly, and then disassemble and clean it really well.

lolno
 
If you have access to silicone oil, that is the best lube known at the moment.

Can you give me a link for a brand or a description of these silicon oil in order to do some research to find it in my country?

Thanks.

If you go to a hardware store or automotive store, you can ask the people there.

Oh, and the sanding/ WD-40, no and no.
 
N sanding, no WD-40. Here's what I did:

Used it a lot for a week probably 200 solves
lubed it
did about 100 solves
lubed it
repeated this process many times

V-5 require a LOT of breaking in, just have faith and keep using it, and it will get better. I also use CRC, and I would recommend that you do the same.
Mine took about 3 weeks before it started to loosen noticeably, and it has continued to get better. Keep using it and lubing it when it starts to get rough, and it will keep getting better and better.
 
Hi, my new V-5 have 4 layers-colour that turns very well but the other 2 layer turns like crap (a new storebougth turns better!!) since this cube dont have adjustable screws (they are ribets) i cant adjust the tension. I already do 3 days of rough breaking-in but still no difference (like 50+ solves). So, what should i do to make this 2 layers turn like the rest??????

Any suggestions?


I don't think it's a tension problem anyway... disassembled, one of the side of my V5 is waaay looser than the others. Assembled, however, no one side feels looser than or spins better than the others.

I think it just needs more lubrication. Also, where/how are you lubricating? If you're doing the 45 degree turn and soaking that ledge, I don't think you'll get very far.. most of the interacting surfaces are inside the cube, so make sure you pull the pieces apart slightly and spray a little in there. Also, turn the cube right away--the V-Cube plastic seems to be more easily eaten by the solvents in aerosol lubricants than what you might be used to.

I guess the best thing for balance is to really work in that side...if you think it's a flawed unit, contact Verdes Innovations. From the stories I've heard, they're actually quite helpful/cooperative.


EDIT: Also, just spray a little bit. I mean... a *LITTLE* bit... and work it in. I find it's really easy to put too much in when it comes to the V5.
 
Last edited:
Lube, solve, repeat. For lubing, disassemble and then lube. Then wait a bit, reassemble, and solve 100 times. Repeat. The problem will go away after a while.

No WD40, no sanding. Not for a V5.
 
Back
Top