Printing a logo onto stickers

spirit

Member
Joined
Jan 22, 2011
Messages
23
I created a custom logo for myself and I want to print it directly onto a sticker for my 3x3. There was a thread on how to do this with a laser printer, but I only have access to a inkjet printer. I know that inkjet printers won't work with the stickers from Cubesmith, but I'm wondering if there are any stickers out there that will work with an inkjet printer?

Otherwise, I was also thinking I can print onto standard label paper, the kind you get from any stationary store. But since they're not meant for cubing, I don't know how long it'll last. Has anyone tried this method before?
 
Last edited:
logosnevjegy_angol.jpg


from www.rubikkocka.hu/pages/kockamatricaeng.htm
 
I use inkjet vinyl and a cricut cutter.
I put them on all the prize cubes for the DeVry Open. They turned out well.

The vinyl is Papilo Inkjet Waterproof Self-Adhesive Vinyl. You could always use scissors if you have to.
logo.jpg
 
Last edited:
If it was a simple logo, surely you could just use a permanent marker (and maybe make a stencil) and then it would cost little/no money, that's what I did for my new Square-1 Stickers.
 
If it was a simple logo, surely you could just use a permanent marker (and maybe make a stencil) and then it would cost little/no money, that's what I did for my new Square-1 Stickers.

I made a maze cube with permanent marker once, but my sandpaper-like block laying fingers rubbed it off VERY quickly.

But hey, if it works for you, sweet.
 
I started a thread some time back on a similar topic, but it didn't generate much of a response. I got cubesmith Vinyl sheets and yet to do any printing on them.

http://www.speedsolving.com/forum/showthread.php?26948-Printing-on-Cubesmith-Vinyl-Sheets

Results with permanent markers were not good for me either, got erased after a couple of solves. I tried to create very simple logos by cutting and applying adhesive tape on stickers leaving out an area to resemble the logo, spraying a durable paint and removing the tape. The results were ok. The logo can be felt by the fingers, not sure if it is a problem because I didn't put these test stickers (removed from an old cube) on any of my cubes.
 
Thanks for the replies everyone.

radmin - I checked out the Papilio website for the vinyls and they were pretty expensive. I think I'll shop around stationary stores in my area to see if they haven't anything similar for a lower price.

anuradha - Your thread was the one I was referring to in my first post. But that has instructions for laser printers while I only have an inkjet.
 
Theoretically could you just take a white side of cubesmith stickers, put it on the top left of a paper, and run it through the printer and hope you get the right spot?

Also, would you select gloss photo paper or something for when you print it?
 
Theoretically could you just take a white side of cubesmith stickers, put it on the top left of a paper, and run it through the printer and hope you get the right spot?

Also, would you select gloss photo paper or something for when you print it?

I did try that, I used Photoshop to align everything so that it'll print correctly. The problem is that the ink doesn't spread so all you end up with are lots of droplet sized dots.
 
Do it the Rubik's brand way. Just print on regular paper then put packing tape over it.
 
Just wanted to update everyone on what I ended up doing.

I ended up using inkjet label paper I found at the dollar store to print the logo onto. As you can see from the image I just printed the logos onto the label paper and cut it out in the shape of a 3x3 sticker. I then applied clear packing tape on top of that so the ink won't rub off while I'm using the cube.

IMG_1977.jpg




Here's how it turned out.
IMG_1974.jpg



You can compare that to what I did before. In this one I just printed the logo onto regular printer paper, cut it out, then stuck it onto the original cube sticker using packing tape. As you can see from the image, the packing tape is starting peel off after a number of solves. That, so far, has not happened with the label paper method. You can also notice that the paper stands out from the original sticker, so it doesn't really look that great.
IMG_1975.jpg
 
I've received my logo stickers from Oliver today.

Clearly I can't comment on how they will ware yet, but first impressions, they are great.

I would recommend him to anyone that wants a personalised sticker.
 
Back
Top