xTheAndyx
Regular
*all credits for this go to my friend, Michael N.*
MEGAMINX WET CORE LUBE PROCESS
1: Get a cap with no sticker on it. If there's a sticker on it, the sticker will peel at a fast rate. Without the cap, the screw can potentially rust. If you've already applied stickers and don't want to take it off, you could try putting tape over it.
2: With the stickerless cap on the desired face, remove all pieces from the layer.
3: Spray at a 90 degree angle downwards at the face, trying to get edge and corner pieces forming the ring on the layer below it.
3b: Try not to spray at the stickers. Silicone has properties known to remove glue.
4: Repeat to every side.
5: Apply turning to the layer to spread the lubricant.
6: Do not over lube. (see 4th note)
NOTES
- Silicone has properties of a lubricant and a glue. When exposed to air however, the silicone does not turn into a glue.
- This process ensures that the lubricant does not turn into a glue, but still applies to the parts of the pieces that need the lubricant the most, the part that are adjacent to other pieces.
- Silicone itself is not very harmful to humans, but the propellant in the silicone has poisonous properties. Please, use caution when spraying silicone, especially if not in a well ventilated area.
- The reason this method is different from the other wet core lubricant processess is that inside all Megaminx's there is empty space. The liquid lubricant can start to puddle up in empty spaces. Be sure not to add too much lubricant, as the not all the liquid may stick to the plastic and simply runoff into the empty spaces.
MEGAMINX WET CORE LUBE PROCESS
1: Get a cap with no sticker on it. If there's a sticker on it, the sticker will peel at a fast rate. Without the cap, the screw can potentially rust. If you've already applied stickers and don't want to take it off, you could try putting tape over it.
2: With the stickerless cap on the desired face, remove all pieces from the layer.
3: Spray at a 90 degree angle downwards at the face, trying to get edge and corner pieces forming the ring on the layer below it.
3b: Try not to spray at the stickers. Silicone has properties known to remove glue.
4: Repeat to every side.
5: Apply turning to the layer to spread the lubricant.
6: Do not over lube. (see 4th note)
NOTES
- Silicone has properties of a lubricant and a glue. When exposed to air however, the silicone does not turn into a glue.
- This process ensures that the lubricant does not turn into a glue, but still applies to the parts of the pieces that need the lubricant the most, the part that are adjacent to other pieces.
- Silicone itself is not very harmful to humans, but the propellant in the silicone has poisonous properties. Please, use caution when spraying silicone, especially if not in a well ventilated area.
- The reason this method is different from the other wet core lubricant processess is that inside all Megaminx's there is empty space. The liquid lubricant can start to puddle up in empty spaces. Be sure not to add too much lubricant, as the not all the liquid may stick to the plastic and simply runoff into the empty spaces.
Last edited: