Lubing Pyraminx?

Jai

Veteran
Joined
Aug 26, 2007
Messages
660
Location
Thornhill, Ontario, Canada
WCA ID
2007GAMB01
YouTube
Visit Channel
I recently got a Pyraminx (white Cube4you one with prismatic stickers), and it doesn't turn that well, so I was wondering if I should lube it. However, there is a gap in the middle of the faces, between the 2nd row middle piece, and the 3rd row middle piece, so if I lubed it, a lot would probably spill out (I don't want to have to take apart my entire pyraminx to lube it). So, any tips for lubing a Cube4You pyraminx?

If not lubing, then is there anything else I could do? I've heard of changing springs and removing ball-bearings, and whatnot, but is this possible on a Cube4you Pyraminx?
 
I have a 9spuzzles one, which should be the same

you can loosen the screws, taking the tips out and adjusting...also, this way you can lube each piece and not "waste" lube

I did both, sprayed a bit on the inside...some time after I took it apart and lubed again

works pretty nice. I average 12-14 seconds on it
with cubesmith stickers it will surely look better :D
 
I found this soviet-time pyraminx from my cupboard and it needed a lube. So I opened first search-result in youtube and did everything like he did. With silicone I sprayed it in and left it outside to dry (fumes). So I came back now and it DOESN'T MOVE!!:confused::confused::eek::eek::confused::confused: It's like totally stuck. Only the one-piece places move, but bigger doesn't!! HALP!:(:(
// got it.. I took a knife and cut all the piece edges with it. And then using lots of power I finally got it open.
 
Last edited:
Do the tips come off? How do you open it to adjust springs and ballbearings?
I recently started pyra on a c4u one and average around 10 shiny stickers and all. I just took a piece out sprayed some lube in and turned it around.
Its probably not too worth it for me to spend time making this pyraminx better as I have a mefferts in the mail.
@Novrill when you lube something you have to move it around for a few seconds at first to prevent that fusing.
 
Last edited:
Back
Top