penfold1992
Regular
ive made this just to try to aid some people who have never brought a DIY before to try to convince them which is the cube for you.
the cube i used to cube was called a "professional speedcube" it was a storebrought cube and was really very good in my opinion but it was starting to pop way to much, overshoot frequently and lock up ALL the time. so time for a change.
anyway, first comment. Lightake. the shipping took AGES! i ordered on the 7th and it got here today... so 3 weeks 3 days to get here. AND on top of that i didnt get my square-1 which i ordered. it will be sent on the next shipping date whenever that is... so the prices may be good on lightake but do prepare to wait a while for your cubes.
AV - came in a bag as it is a DIY all the bits were seperate
FII - came inside a sheng en box with a holographic image on it...
both in a paper bag with bubble wrap attached to it.
onto the review.
FII - i unboxed this and instantly thought it was very smooth with minimal friction on the turning. it cuts corners about 3/4 of the middle cubie and it reverse cuts by about a 1/8th of the middle cubie which is really all you need in my opinion. the middle layer is very free which is nice and i get almost NO lockups (unless i turn wrong which is my fault completely) and so far i have had no pops either (the only thing i have popped is a corner cap)w. another thing to add, this feels very much like a rubiks or storebrought in feel which means it wont take much of getting used to if you never had a DIY before.
the only negitive thing ive seen at the moment for me is that it overshoots quite a lot... there seems to be no friction on the corners to slow it down so you can spin about 120 degrees when you only want 90...
one more note... comes pre-lubed
AV - a very different experience is a simple way of putting it. this cube was what i imagined a DIY to feel like and act like (not saying thats a good or bad thing). it has a different feel to all the cubes i own it has a gritty feeling to the turning however it still turns very smoothly just the feeling isnt smooth. the structure of the AV is very secure it has very little gaps to it which is to hopefully prevent lock ups and such from occuring. the edge pieces have little teeth on them to try to prevent pops however i have popped it a few times already however the tension is not set to just quite how i want it yet and i havnt sanded down the edge pieces either. the best feature about this cube is it doesnt oveshoot at all and its even difficult to undershoot. The AV is unlubed however i dont feel it really is in need of lube quite yet
Ok just a little conclusion:
If you would like a cube that:
cuts corners ok
is very slippy and loose
is quiet
feels similar to your storebrought (FEELS... as in the turning feeling)
GET A FII
if you would like a cube that:
cuts corners very well but pops quite a lot.
has a very rough feel to it and is very accurate turning
you dont care about sound ( this one is a little noisy)
and you would like a tottally different feel to your current cube
and you are not very heavy handed in turning...
GET A AV
this post isnt complete yet as i will be adding a few things later however please leave your suggestions or questions and i will try to update it as soon as possible. once again this is like a beginners Q/A for which brand new DIY to get and not necessarily for those who have many other cubes and want a full review.
Thank you for reading too ^^
the cube i used to cube was called a "professional speedcube" it was a storebrought cube and was really very good in my opinion but it was starting to pop way to much, overshoot frequently and lock up ALL the time. so time for a change.
anyway, first comment. Lightake. the shipping took AGES! i ordered on the 7th and it got here today... so 3 weeks 3 days to get here. AND on top of that i didnt get my square-1 which i ordered. it will be sent on the next shipping date whenever that is... so the prices may be good on lightake but do prepare to wait a while for your cubes.
AV - came in a bag as it is a DIY all the bits were seperate
FII - came inside a sheng en box with a holographic image on it...
both in a paper bag with bubble wrap attached to it.
onto the review.
FII - i unboxed this and instantly thought it was very smooth with minimal friction on the turning. it cuts corners about 3/4 of the middle cubie and it reverse cuts by about a 1/8th of the middle cubie which is really all you need in my opinion. the middle layer is very free which is nice and i get almost NO lockups (unless i turn wrong which is my fault completely) and so far i have had no pops either (the only thing i have popped is a corner cap)w. another thing to add, this feels very much like a rubiks or storebrought in feel which means it wont take much of getting used to if you never had a DIY before.
the only negitive thing ive seen at the moment for me is that it overshoots quite a lot... there seems to be no friction on the corners to slow it down so you can spin about 120 degrees when you only want 90...
one more note... comes pre-lubed
AV - a very different experience is a simple way of putting it. this cube was what i imagined a DIY to feel like and act like (not saying thats a good or bad thing). it has a different feel to all the cubes i own it has a gritty feeling to the turning however it still turns very smoothly just the feeling isnt smooth. the structure of the AV is very secure it has very little gaps to it which is to hopefully prevent lock ups and such from occuring. the edge pieces have little teeth on them to try to prevent pops however i have popped it a few times already however the tension is not set to just quite how i want it yet and i havnt sanded down the edge pieces either. the best feature about this cube is it doesnt oveshoot at all and its even difficult to undershoot. The AV is unlubed however i dont feel it really is in need of lube quite yet
Ok just a little conclusion:
If you would like a cube that:
cuts corners ok
is very slippy and loose
is quiet
feels similar to your storebrought (FEELS... as in the turning feeling)
GET A FII
if you would like a cube that:
cuts corners very well but pops quite a lot.
has a very rough feel to it and is very accurate turning
you dont care about sound ( this one is a little noisy)
and you would like a tottally different feel to your current cube
and you are not very heavy handed in turning...
GET A AV
this post isnt complete yet as i will be adding a few things later however please leave your suggestions or questions and i will try to update it as soon as possible. once again this is like a beginners Q/A for which brand new DIY to get and not necessarily for those who have many other cubes and want a full review.
Thank you for reading too ^^