'Audio Fingerprint' of different 3x3s

AaronW

Member
Joined
Apr 29, 2015
Messages
9
WCA ID
2009WOLF01
Today I decided to record audio of a bunch of 3x3s on the same mic, a Sennheiser MD421, and compare their average frequency spectrums to observe peaks, troughs, shelves, etc. This data could potentially help people identify the model of cube from an audio recording. Much like the light spectrum fingerprint of various elements, each cube has a distinct sound.
This could be a total waste of time, and maybe lubing and setting up of a cube determines its sound way more than its construction, but I still think that maybe the resonant frequencies of the cubes will differentiate them.

I wrote down whatever peaks I saw in the spectrum. (I use voxengo SPAN for this)
The first frequency I’ve written for each is usually the lowest peak/lowestfrequency produced. (probably the least important)
The middle one or two are regular looking peaks, I would call these the body frequencies.
The last numbers are the highest peak of the cube, and are usually very loud. This range accounts for most of the 'bite' or 'clackiness' of the cube.
Ranges, indicated with { } appear for some cubes in the upper frequencies. If there was not a single obvious frequency, but a relatively equal range, I specified the range.

The frequencies are in kilohertz (kHz)
Hualong: 1.69, 3.39, 12.5
Tanglong: 1.10, 5.35, {11.2-13.8}
Guanlong: 1.10, 4.7, 11.7
Dayan Guhong: 1.14, 5.79, 13.7
Aolong v2: 2.58, 4.5, 6.0, {11.5-13.5}
the first Yuxin 3x3: 1.88, 3.65, 5.70, {11.5-13.8}
Fangshi Shuangren: 1.13, 3.53, 12,0
Newisland Phoenix: 1.36, 5.35, {11.2-14.2}
QiYi Sail: 1.8, 5.86, 13.2
2009 mini cube4u: 1.15, 3.47, 13.3
original 1980s Rubik’s brand: 1.15, 3.55, {11.3-13.7khz}

Could this be done? Does this matter? Does anyone care?
Let me know your opinions on this.
 
Last edited:
Back
Top