A many questies about lubrication!!!

Cyber

Regular
Joined
Sep 21, 2008
Messages
187
I have reached now 40sec BP without lube :P So I think it is time to lubricate my cube...Now Im working to find best way and time to do it! Some1 help me?

How long u should wait until u should lube ur cube?(500completions and then?) I have noticed that this got a big differnce...But how much will it be? :D

And then it is time to lube!
What kinda of products should I use?
Pop some edges or "open" the whole cube?
How long it should be scramble after lube?
And how long it takes to get it dry?
Should I take off extra silicon after it is dry?

Thats it! All that I wonder :P
Feel free to responce!
 
One of the best silicone spray lubricants are...
CRC Heavy Duty Silicone Spray Lubricant
CRC Food Grade Silicone Spray Lubricant
Jig-a-loo

Most people use silicone spray lubricants. Some people recommend not to use oil-based lubricants such as petroleum jelly/vaseline because it "eats" the plastic. But, NEVER EVER use WD-40.

Badmephisto did an experiment on YouTube for the best way to lubricate a cube. You want to take out 5-8 edge pieces out, spray silicone in, and play with the cube for 2 minutes. Then just let it sit there for 6+ hours. Here is the experiment: http://www.youtube.com/watch?v=JtOHpSyfjd8
 
Thanks for the link!!! I'm definitely getting Jig-A-Loo and spraying my cube in all 8 edges. Should I just spray once, like just tap the button and that's it, or hold it for like half a second? And how do I work it in? I don't know finger tricks or any great algorithms to do that will use every portion of the cube.
 
Thanks for the link!!! I'm definitely getting Jig-A-Loo and spraying my cube in all 8 edges. Should I just spray once, like just tap the button and that's it, or hold it for like half a second? And how do I work it in? I don't know finger tricks or any great algorithms to do that will use every portion of the cube.
Just do it like in the video. I think it would be pretty hard to mess up lubrication so don't worry about having to do it exactly right. And to work it in, just scramble the cube after lubing and maybe solve it a couple times... your goal is just to try and get it spread across all pieces.
 
Will doing it for more than 2 minutes thin it out too much? Would letting it sit after mixing it around for a little, instead of constantly mixing it around be more efficient? I don't want to under or over lube it.
 
Will doing it for more than 2 minutes thin it out too much? Would letting it sit after mixing it around for a little, instead of constantly mixing it around be more efficient? I don't want to under or over lube it.

you definitely have to mix it around for at least a minute or two. how silicone spray works is it feels like its binding the plastic together at first. it may feel difficult to turn and probably wont cut corners well. after a minute or two, it will loosen up and start to turn great. once you spray it, make sure you get the pieces in and scramble it, dont let it sit right after you spray it. once it feels loose, then you let it sit for a while
 
Like I said, it's hard to do it wrong... meaning that it's going to do what you want either way. Having it too thin or under lubed is not a problem because you can just put in more if you need to. I've also never had trouble because of lubing too much. It wouldn't hurt to start with a little and work you're way up. But I really think you should just do it, you'll naturally stop yourself before the point where there's too much. Working it in is mainly because lube tends to work the opposite way if it isn't allowed to dry properly, meaning that it will make your cube stick together. As long as you work it in a little (or a lot) and don't just spray it in and let the cube sit there for a day, then you'll be fine.

A minute too late, oh well.
 
Lol. So close. Okay. Once I get some money (extra money that I won't need for anything else) to buy Jig-A-Loo, I will buy it. Too bad HomeDepot only has it online, or I wouldn't have to pay for it, just call my dad on his way home from work to pick it up, like the super glue for my 3x3x5. But since its online, I may have to pay for it myself. :(
 
Back
Top