I heard there was an updated version of Edison cube last week and ordered it right away from cubenjoy.com. I’m writing this right after receiving the cube. It seems like Sky Cube is already well known to most Korean speedcubers. I know I’m not the only Korean in this forum, so if you know about this cube well, or you (non-koreans) just happen to own one by any chance, you might like to leave comments.
There are three cubes made by Shin-Kwang, a company that gets most profit by selling jam-free copying papers and massaging machines. They produced the first cube in South Korea about 20 years ago with the name of ‘Nobel cube,’ about 2000won in Korean currency (2 bucks). This one is not as famous because it is so stiff, and it takes about 5 minutes to solve this for most sub 30 speedcubers. Second is Edison Cube, 7500won (7.50$), designed by Korea Cube Association. It is my main speed cube and takes me around 25s to solve. And the last one is called Sky cube, 14500won (14.50). It seems like they are naming their cubes after historical intellectuals. Obviously Nobel is Alfred Nobel, and Edison is Thomas Edison. But ‘Sky’ isn’t a guy’s name. Just in case you wanted to know, ‘sky’ in Korea means top 3 colleges in Korea like ‘Ivy league’ of US. ‘Sky’ is initials of three colleges ‘Seoul national univ,’ ‘Ko-ryo (Korea) Univ,’ and ‘Yonsei univ.’
According to ‘cubenjoy.com,’ the only place that sells SkyCube, SkyCube is basically an upgraded version of Edison Cube. (They say Sky won’t replace Edison because some still prefer Edison over Sky cube in Korea) Major error of the Edison cube was its weight, textured feeling inside of the cubies and loose center pieces. The center piece was prone to fall and it is against WCA rules to participate without it. Although they sell extra caps for replacement, it is indeed disturbing. Also, it is about .5mm away from the center than it is supposed to be when it’s all the way in. Qualities of Edison cube varied a lot. Yellow (There are two yellows, I’m talking about the bright one. not the mustardish yellow one) is always the best, but black colors are sometimes good, but sometimes crappy. So people used to say to get the best black cube, you should buy 3 black cubes and pick the best one. But they now filter crappy cubes. The color is only available in white since white is the only plastic that qualifies as a top quality speed cube (according to them).
My initial feeling of the cube wasn’t very good. My fingers have been conditioned to solve Edison Cube, which has reasonable amount of friction for accurate turn. However, Sky cube had zero friction. When I first got my Type F, I thought no plastic cubes would turn smoother than this, but Sky cube had like absolute zero friction (doesn’t mean it felt better as a speedcube to me). This might be good for someone who prefers Type F over any other cubes, but to me, my fingers turned the cube more than it supposed to be, disturbing smooth connection between movements.
The weight is also significantly reduced. When you hold the cube, it would feel as if you are holding a fake cube made by thick papers. It feels like I could crush it with my one fist. But that makes it unpoppable while solving because it is impossible give torque strong enough due to its light weight.
My first solving with the cube was around 50s. (My average is 27s) I was very disappointed initially, but as I got used to the feeling, it feels perfect, and I broke the record with it which is 22.
Inside of the cube is completely smooth. The cube turns well without lubrication, and It feels same even after lubing. To do this, they put caps outside of the cubies. Most speed cubes including DIY cubes, when you take it apart and see the other side of cubies, you’ll see line that was made while fusing plastic pieces with heat in the factory. For Sky Cube, instead of looking smooth outside, they chose to make inside smooth. This results the design of cube look cheap overall. (It’s not visible in the picture)
The logo says ‘World becomes one through SkyCube’ in Korean. Under the cheap looking logo, there’s Shin-kwang’s website, ‘www.sks1004.com’ which isn’t ready for customers yet. BTW you need Type-F stickers if you are ordering stickers from cubesmith.com
The reason why cubenjoy do not officially sell the cubes to foreign countries is because it is only legal in Korea. As Korea does not acknowledge the patent of Rubik’s Cube by Ideal toys, it is legal to make Rubik’s cube. As far as I know, every country other than Korea acknowledges the patent and it is illegal to sell replicas. Cubenjoy obviously does not want to be engaged in international lawsuits. That’s why they don’t ship internationally IMO.
Overall, it’s quite decent cube, turns without friction, virtually unpoppable, and looks cheap. For most cubers, accessibility would be the problem.
I’m happy that quality of cubes is getting better these days. I always hoped to see companies like v-cubes since 7 years ago. Now there is v-cube, and companies like Dayan-guhong and ShinKwang are trying to become something like v-cube.
P.S. The picture shows Comparison between Sky cube and Edison Cube.
There are three cubes made by Shin-Kwang, a company that gets most profit by selling jam-free copying papers and massaging machines. They produced the first cube in South Korea about 20 years ago with the name of ‘Nobel cube,’ about 2000won in Korean currency (2 bucks). This one is not as famous because it is so stiff, and it takes about 5 minutes to solve this for most sub 30 speedcubers. Second is Edison Cube, 7500won (7.50$), designed by Korea Cube Association. It is my main speed cube and takes me around 25s to solve. And the last one is called Sky cube, 14500won (14.50). It seems like they are naming their cubes after historical intellectuals. Obviously Nobel is Alfred Nobel, and Edison is Thomas Edison. But ‘Sky’ isn’t a guy’s name. Just in case you wanted to know, ‘sky’ in Korea means top 3 colleges in Korea like ‘Ivy league’ of US. ‘Sky’ is initials of three colleges ‘Seoul national univ,’ ‘Ko-ryo (Korea) Univ,’ and ‘Yonsei univ.’
According to ‘cubenjoy.com,’ the only place that sells SkyCube, SkyCube is basically an upgraded version of Edison Cube. (They say Sky won’t replace Edison because some still prefer Edison over Sky cube in Korea) Major error of the Edison cube was its weight, textured feeling inside of the cubies and loose center pieces. The center piece was prone to fall and it is against WCA rules to participate without it. Although they sell extra caps for replacement, it is indeed disturbing. Also, it is about .5mm away from the center than it is supposed to be when it’s all the way in. Qualities of Edison cube varied a lot. Yellow (There are two yellows, I’m talking about the bright one. not the mustardish yellow one) is always the best, but black colors are sometimes good, but sometimes crappy. So people used to say to get the best black cube, you should buy 3 black cubes and pick the best one. But they now filter crappy cubes. The color is only available in white since white is the only plastic that qualifies as a top quality speed cube (according to them).
My initial feeling of the cube wasn’t very good. My fingers have been conditioned to solve Edison Cube, which has reasonable amount of friction for accurate turn. However, Sky cube had zero friction. When I first got my Type F, I thought no plastic cubes would turn smoother than this, but Sky cube had like absolute zero friction (doesn’t mean it felt better as a speedcube to me). This might be good for someone who prefers Type F over any other cubes, but to me, my fingers turned the cube more than it supposed to be, disturbing smooth connection between movements.
The weight is also significantly reduced. When you hold the cube, it would feel as if you are holding a fake cube made by thick papers. It feels like I could crush it with my one fist. But that makes it unpoppable while solving because it is impossible give torque strong enough due to its light weight.
My first solving with the cube was around 50s. (My average is 27s) I was very disappointed initially, but as I got used to the feeling, it feels perfect, and I broke the record with it which is 22.
Inside of the cube is completely smooth. The cube turns well without lubrication, and It feels same even after lubing. To do this, they put caps outside of the cubies. Most speed cubes including DIY cubes, when you take it apart and see the other side of cubies, you’ll see line that was made while fusing plastic pieces with heat in the factory. For Sky Cube, instead of looking smooth outside, they chose to make inside smooth. This results the design of cube look cheap overall. (It’s not visible in the picture)
The logo says ‘World becomes one through SkyCube’ in Korean. Under the cheap looking logo, there’s Shin-kwang’s website, ‘www.sks1004.com’ which isn’t ready for customers yet. BTW you need Type-F stickers if you are ordering stickers from cubesmith.com
The reason why cubenjoy do not officially sell the cubes to foreign countries is because it is only legal in Korea. As Korea does not acknowledge the patent of Rubik’s Cube by Ideal toys, it is legal to make Rubik’s cube. As far as I know, every country other than Korea acknowledges the patent and it is illegal to sell replicas. Cubenjoy obviously does not want to be engaged in international lawsuits. That’s why they don’t ship internationally IMO.
Overall, it’s quite decent cube, turns without friction, virtually unpoppable, and looks cheap. For most cubers, accessibility would be the problem.
I’m happy that quality of cubes is getting better these days. I always hoped to see companies like v-cubes since 7 years ago. Now there is v-cube, and companies like Dayan-guhong and ShinKwang are trying to become something like v-cube.
P.S. The picture shows Comparison between Sky cube and Edison Cube.
Attachments
Last edited: