Monthly Computer Cube Competition 14: August 2010 (special edition!)

qqwref

qqwref

Legend
Joined
Dec 18, 2007
Messages
7,834
Location
a <script> tag near you
WCA ID
2006GOTT01
YouTube
Visit Channel
This is the monthly speedsolving.com computer cube competition! But... it's a bit different this time. 2x2 and 3x3 seem to be the only popular events, so for this month I've kicked it up a notch on the others. Who doesn't like a challenge, eh? They're all best of 1 except 3BLD, so you don't have to go crazy if you don't like solving so much.

Here are the rules.
- Do all of the solves for each event consecutively (no practice solves in between), and you must decide that you're doing official solves right before you start the first one. You can redo a solve if you get a computer-related problem.
- You may use any simulator you want (if it supports the puzzle of course).
- NO MACROS! You can't do more than one turn per key press.
- Try to keep inspection under 15 seconds.
- I have the right to ask for proof that you are capable of the times you claim.
- For the 3x3 and 2x2 events, the top 5 people get 6, 4, 3, 2, and 1 points in that order. For every other event, everyone who submits a non-DNF time gets 5 points.

Here are some useful simulators:
- Ryan Heise's hi-games.
- Ryan Heise's 3x3 BLD sim.
- Gelatinbrain for many puzzles.
- Jeremy Fleischman's jflySim + qqTimer.
- Mitchell Stern's NxN clock simulator.
- My jsclock (dvorak version) or Tim Sun's sim for 3x3 clock.
- My qCube.
- My IsoMinxSim.

This competition is over. Results are here.

The current list of puzzles are as follows:
- 2x2x2: Average of 12.
- 3x3x3: Average of 12.
- 8x8x8: Best of 1.
- 9x9x9: Best of 1.
- 10x10x10: Best of 1.
- 20x20x20: Best of 1.
- 1x5x5: Best of 1.
- 4x4x5: Best of 1.
- 4x5x5: Best of 1.
- 3x3x3 BLD: Best of 5.
- Clock (10x10): Best of 1.
- Clock (20x20): Best of 1.
- Clock (30x30): Best of 1.
- Deep-Cut Helicopter Cube: Best of 1. (This is gelatinbrain 3.3.3.)
- Gigaminx: Best of 1.
- Lattice Cube: Best of 1. (This is gelatinbrain 3.2.7.)
- Master FTO: Best of 1. (This is gelatinbrain 4.1.8.)
- Master Pyraminx: Best of 1. (This is gelatinbrain 5.1.10.)
- Master Skewb: Best of 1. (This is gelatinbrain 3.2.2.)
- Master Super-X: Best of 1. (This is gelatinbrain 3.4.5.)
- Square-2: Best of 1. (Use jflysim.)
- Teraminx: Best of 1.

Good luck and have fun!
 
Last edited:
Oh boy...
I was just thinking about doing a teraminx solve the other day...
I guess I have some motivation now.

1x5x5: 2:23.594
Gigaminx: 1:09:05.687
 
Last edited:
congrats qq you have officially gotten me to love computer cubes

2x2: 5.96, 9.85, 11.64, 9.89, 8.69, 7.93, 5.75, 3.95, 6.70, 10.17, 7.44, 4.45 = 7.68 (a couple PLL skips :))
3x3: 53.29, 32.14, 37.25, 41.18, 36.27, 38.01, 49.47, 33.40, 35.01, 42.06, 30.27, 51.03 = 39.58 getting more used to this
1x5x5: 1:42.066 this thing is weird
Clock (10x10): 5:36.243 first day i've ever tried solving solving any size clock :)
Clock (20x20): 20:20.148 headache

sorry, i'm afraid that might be all I will be able to do for this comp...I don't have enough time to sit in front of the computer for as long as it would take me to solve one of those large cubes or a gigaminx or a 30x30 clock..and as for all that gelatinbrain stuff..I haven't even learned how to solve the normal versions of a Pyraminx, Skewb, FTO, etc...and I'm going back to school soon which means I won't have too much time to mess with them..next month if it is back to normal I should be able to do most things though
 
Last edited:
sz35 said:
I want to solve a sq2. when I open jflysim+qqtimer there is no sq2 option, only sq1/
Click to expand...

Go to the Square-1 sim, then select 'Options' in the applet, and change the variation to Square-2.
 
2x2: 4.05, 4.91, 7.55, 9.14, 4.65, 6.34, 4.67, 3.88, 5.84, (11.83), 4.84, (3.58)
I think I'll stick to real 2x2. :p
3x3: 14.09, 17.31, 16.82, 15.68, 15.05, (11.46), 15.68, 17.70, (18.59), 16.29, 16.88, 14.69 = 16.02
Pretty good considering I haven't done any computer cubing in quite a while.
 
Last edited:
hawkmp4 said:
sz35 said:
I want to solve a sq2. when I open jflysim+qqtimer there is no sq2 option, only sq1/
Click to expand...

Go to the Square-1 sim, then select 'Options' in the applet, and change the variation to Square-2.
Click to expand...
Thanks :)

Sq2: 3:45.17
3x3x3: 20.37, 32.99, 25.12, 22.37, 26.43, 29.39, 28.74, 17.98, 23.00, 22.17, 26.63, 25.10 = 24.93 Yes, I suck at computer cubes, and I'm proud of it.
 
Last edited:
2x2: 3.05, (1.38), 3.28, 2.25, 5.13, 2.95, 3.59, (6.25), 2.13, 2.69, 4.17, 2.27 --> 3.15
Wow. This is really bad. 1.38 was nl.

3x3: 13.03, 14.41, 12.24, 12.48, 14.50, 14.49, (15.31), 10.09, 12.22, 11.41, (9.55), 12.69 --> 12.75
First computer cube avg since I got back from nats. The 9.55 is my new nl pb, everything else was meh.
 
Last edited:
4x4x4: 1:02.77 --> kinda annoying cus it was a really good reduction and no OLL parity, but the PLL was just 2 diagonal corners so I did PLL parity and N perm :\
 
2x2: 6.33, 4.84, 9.04, 5.43, 6.85, 4.98, (25.70), 12.55, (3.00), 5.33, 5.76, 7.47 = 6.86

Stupid counting 9 and 12.

3x3: 22.70, 23.29, 24.57, 27.98, 28.24, 37.88, 22.34, 35.18, (41.57), (18.95), 20.25, 19.43 = 26.18

I hate computer G-perms.
 
Last edited:
Jude said:
4x4x4: 1:02.77 --> kinda annoying cus it was a really good reduction and no OLL parity, but the PLL was just 2 diagonal corners so I did PLL parity and N perm :\
Click to expand...

Are N-perms as bad on the computer as they are in real life?
 
Here are my submissions for this month.

8x8x8: 4:36.774
9x9x9: 6:25.538
10x10x10: 11:17.943
2102 @ 3.1 lol
Gigaminx: 7:05.932
Teraminx: 20:07.429
2744 @ 2.27
3x3x3: (12.497) 10.912 10.499 9.846 11.234 11.451 9.919 8.529 (8.297) 9.628 9.653 9.759 => 10.143
nice
2x2x2: (16.728) 3.169 2.361 2.934 5.199 (1.914) 4.462 3.538 2.973 2.72 8.891 3.678 => 3.993
fail
Lattice Cube: 57
Master Skewb: 2:01
Master Super-X: 2:56
no parity yessss
Master FTO: 8:05
Master Pyraminx: 2:12
Clock (10x10): 2:11.906
Clock (20x20): 9:59.765
sub10 wooo
Clock (30x30): 25:56.750
6060 moves at 3.893 tps... dang
4x5x5: 8:42.625
ugh terrible, kept completely screwing up inner section (warmup was sub4)
4x4x5: 2:20.156
good
Square-2: 2:12.406
redux was meh
1x5x5: 5.828
3x3x3 BLD: DNF DNF DNF 2:34.48 DNS
thought I wouldn't get one, phew
 
8x8x8: 15:40.14
Comment - Done on Gabbasoft

1x5x5: 3.946
Comment - Done on isocubesim

4x4x5: 10:32.507
Comment - Done on isocubesim, first ever solve was 34:59.xyz :fp I wasted a lot of time trying to solve the middle layer.

Clock (20x20): 1:36:24.489
Comment - Done in 2 parts, 1:20:00 of this was not solving time (should I remove this from the time or not?)
 
ben1996123 said:
Clock (20x20): 1:36:24.489
Comment - Done in 2 parts, 1:20:00 of this was not solving time (should I remove this from the time or not?)
Click to expand...
Of course not.

Yes said:
F R U' R' U' R U R' (U PLL parity U) R U R' U' R' F R F'
Click to expand...
You mean F R U' R' U' R U R' (U PLL parity U') F R U R' U' R' F R F' ?
Personally I prefer (L U L') (PLL parity) y' R U R' U' R' F R2 U' R' U' R U R' U' F'.


Here are the final results, and then the rankings for all events:

Final Results
1: qqwref - 99 points!!!
2: ben1996123 - 20 points!!
3: plechoss & uberCuber - 15 points!
5: hawkmp4 & zosomaniac - 10 points
7: MrData - 7 points
8: sz35 - 6 points
9: Anthony - 4 points
10: mande - 1 point
11: cincyaviation - 0 points :(

Individual events:
Code: 
[B]2x2x2[/B]
1. plechoss: 2.787
2. MrData: 3.151
3. qqwref: 3.9925
4. Anthony: 5.587
5. mande: 6.858
6. uberCuber: 7.683

[B]3x3x3[/B]
1. qqwref: 10.1430
2. plechoss: 10.719
3. MrData: 12.756
4. Anthony: 16.019
5. sz35: 24.932
6. mande: 26.186
7. uberCuber: 39.582
8. cincyaviation: 45.929

[B]8x8x8[/B]
1. qqwref: 4:36.774
2. ben1996123: 15:40.14

[B]9x9x9[/B]
1. qqwref: 6:25.538

[B]10x10x10[/B]
1. qqwref: 11:17.943

[B]20x20x20[/B]

[B]1x5x5[/B]
1. ben1996123: 3.946
2. qqwref: 5.828
3. uberCuber: 1:42.066
4. hawkmp4: 2:23.594

[B]4x4x5[/B]
1. qqwref: 8:42.625
2. ben1996123: 10:32.507

[B]4x5x5[/B]
1. qqwref: 2:20.156

[B]3x3 BLD[/B]
1. qqwref: 2:34.48

[B]Clock (10x10)[/B]
1. qqwref: 2:11.906
2. uberCuber: 5:36.243

[B]Clock (20x20)[/B]
1. qqwref: 9:59.765
2. uberCuber: 20:20.148
3. ben1996123: 1:36:24.489

[B]Clock (30x30)[/B]
1. qqwref: 25:56.750

[B]Deep-Cut Helicopter Cube[/B]

[B]Gigaminx[/B]
1. qqwref: 7:05.932
2. hawkmp4: 1:09:05.687
3. zosomaniac: 1:45:19

[B]Lattice Cube[/B]
1. qqwref: 57

[B]Master FTO[/B]
1. qqwref: 8:05

[B]Master Pyraminx[/B]
1. qqwref: 2:12

[B]Master Skewb[/B]
1. qqwref: 2:01

[B]Master Super-X[/B]
1. qqwref: 2:56

[B]Square-2[/B]
1. plechoss: 2:05.38
2. qqwref: 2:12.406
3. sz35: 3:45.17

[B]Teraminx[/B]
1. qqwref: 20:07.429
2. zosomaniac: 2:54:36
 
You must log in or register to reply here.

Similar threads

colegemuth
Monthly Computer Cube Competition - August 2018
Replies
11
Views
2,033
LightFlame_
LightFlame_
colegemuth
Monthly Computer Cube Competition - July 2018
Replies
11
Views
2,802
colegemuth
colegemuth
colegemuth
Monthly Computer Cube Competitions
Replies
0
Views
641
colegemuth
colegemuth
colegemuth
Monthly Computer Cube Competitions?
Replies
0
Views
772
colegemuth
colegemuth
qqwref
Monthly Computer Cube Summary 2010
Replies
4
Views
1,683
DavidWoner
DavidWoner
Back
Top