AV vs FII comparison

penfold1992

Regular
Joined
Mar 31, 2009
Messages
103
Location
Bristol, UK
ive made this just to try to aid some people who have never brought a DIY before to try to convince them which is the cube for you.

the cube i used to cube was called a "professional speedcube" it was a storebrought cube and was really very good in my opinion but it was starting to pop way to much, overshoot frequently and lock up ALL the time. so time for a change.

anyway, first comment. Lightake. the shipping took AGES! i ordered on the 7th and it got here today... so 3 weeks 3 days to get here. AND on top of that i didnt get my square-1 which i ordered. it will be sent on the next shipping date whenever that is... so the prices may be good on lightake but do prepare to wait a while for your cubes.

AV - came in a bag as it is a DIY all the bits were seperate
FII - came inside a sheng en box with a holographic image on it...
both in a paper bag with bubble wrap attached to it.

onto the review.

FII - i unboxed this and instantly thought it was very smooth with minimal friction on the turning. it cuts corners about 3/4 of the middle cubie and it reverse cuts by about a 1/8th of the middle cubie which is really all you need in my opinion. the middle layer is very free which is nice and i get almost NO lockups (unless i turn wrong which is my fault completely) and so far i have had no pops either (the only thing i have popped is a corner cap)w. another thing to add, this feels very much like a rubiks or storebrought in feel which means it wont take much of getting used to if you never had a DIY before.
the only negitive thing ive seen at the moment for me is that it overshoots quite a lot... there seems to be no friction on the corners to slow it down so you can spin about 120 degrees when you only want 90...
one more note... comes pre-lubed

AV - a very different experience is a simple way of putting it. this cube was what i imagined a DIY to feel like and act like (not saying thats a good or bad thing). it has a different feel to all the cubes i own it has a gritty feeling to the turning however it still turns very smoothly just the feeling isnt smooth. the structure of the AV is very secure it has very little gaps to it which is to hopefully prevent lock ups and such from occuring. the edge pieces have little teeth on them to try to prevent pops however i have popped it a few times already however the tension is not set to just quite how i want it yet and i havnt sanded down the edge pieces either. the best feature about this cube is it doesnt oveshoot at all and its even difficult to undershoot. The AV is unlubed however i dont feel it really is in need of lube quite yet

Ok just a little conclusion:

If you would like a cube that:
cuts corners ok
is very slippy and loose
is quiet
feels similar to your storebrought (FEELS... as in the turning feeling)

GET A FII

if you would like a cube that:
cuts corners very well but pops quite a lot.
has a very rough feel to it and is very accurate turning
you dont care about sound ( this one is a little noisy)
and you would like a tottally different feel to your current cube
and you are not very heavy handed in turning...

GET A AV

this post isnt complete yet as i will be adding a few things later however please leave your suggestions or questions and i will try to update it as soon as possible. once again this is like a beginners Q/A for which brand new DIY to get and not necessarily for those who have many other cubes and want a full review.

Thank you for reading too ^^
 
This is pretty much opposite of how I feel.

My AV came assembled and pre-lubed, from speedcubeshop.com, and only took 3 days to ge to my house.

My AV rarely pops, and I am a rough cuber. When I force it, because I am rough, it pops.

I tried the FII, and I liked it, but it popped waaay too often.

To me, if you're a rough cuber, go with AV.
If you are not a rough cuber and have good control of turns, an FII is good.
 
I just got an F-II the other day and I'm having the exact same experience as you: smooth out of the box, only popped once, a corner cap fell out a few times. Great cube.
 
the cube i used to cube was called a "professional speedcube" it was a storebrought cube and was really very good in my opinion but it was starting to pop way to much, overshoot frequently and lock up ALL the time. so time for a change.

anyway, first comment. Lightake. the shipping took AGES! i ordered on the 7th and it got here today... so 3 weeks 3 days to get here. AND on top of that i didnt get my square-1 which i ordered. it will be sent on the next shipping date whenever that is... so the prices may be good on lightake but do prepare to wait a while for your cubes.



That's why I order from HKNowstore. The shipping only took two weeks which is good. Plus, lightake has been known for forgetting to ship items. HKNowstore is not a huge company like lightake the sells many things. They are a individually owned business. Every time I have ordered, all of my cubes came and on time

I like the A5 more because the F-II seems to wear out more quickly. Also the plastic on the F-II is not a great quality. Oh yeah, the center cap design is bad. On top of all that if ya want to put cubesmith stickers you have to make another order for "small size stickers".
 
Last edited:
i think i need to break my AV in a lot more... its currently really not up to how i would like it to perform imo. for me its very stiff when tightened but too poppy and loose when loosened a little bit... im trying to figure a way of balancing these two whilst still getting the experience from the cube this is before i lube it anyway... i may have to haiyan mod it too soon

EDIT: may i just add again this is a kind of guide to help people who have never brought a DIY before and are coming from storebrought so if you have your own opinions please post and ill add it into my first post. thanks for the comments so far though i apreciate it
 
I like the A5 more because the F-II seems to wear out more quickly. Also the plastic on the F-II is not a great quality. Oh yeah, the center cap design is bad. On top of all that if ya want to put cubesmith stickers you have to make another order for "small size stickers".

I don't own an A5, so I can't compare the durability, but I can say that my FII is a couple months old and still performs well after tens of thousands of solves. It does generate some plastic shavings, which I clean out and relube every few weeks, but that's the only maintenance I've done (haven't so much as touched the tension since the first day). If the whole cube melted into a pile of goop tomorrow, I'd still consider it worth the investment.
 
i wouldnt say A5 pops alot if you adjust the tension right...

I tightened mine so it wouldn't pop, but it was too tight, so i just set the tension back to normal, and it popped a lot, but it was worth the feel.

In general:
Out of the box, I liked my AV much better than the FII, but after gluing the caps, on the FII (not centers), and adjusting the tensions, I like it better. The main reason for this is because they are equally as good in different ways after I have done this, but the no-popping beats out the popping (FII barely ever pops). But sometimes I use my AV depending on my mood, they both are very good cubes, and the AV seems smaller in my hands, which I like better, but I still prefer my FII. Btw, I relubricated it with maru lube and put tiles on it.

oh yeah, and another note, it's harder to take off the center caps on an FII than on an AV, which actually got a bit annoying when I tried to adjust my tensions.
 
maybe its the lube making mine feel soo much different... i have no lube in my AV yet and i might be just putting some maplins silicone spray in it to make it slide a bit better whilst it breaks in a bit but really i dont think it needs the lube too much.. its still fast just... doesnt feel smooth and glidey

i prefer FII out of the box by a long way but AV is... growing on me... i just need to mod it and break it in much more
 
This is pretty much opposite of how I feel.

My AV came assembled and pre-lubed, from speedcubeshop.com, and only took 3 days to ge to my house.

My AV rarely pops, and I am a rough cuber. When I force it, because I am rough, it pops.

I tried the FII, and I liked it, but it popped waaay too often.

To me, if you're a rough cuber, go with AV.
If you are not a rough cuber and have good control of turns, an FII is good.

I think that most people who are used to using a Rubik's storebought kinda have to have relatively good control of turns because the storebought locks up so easily and cuts corners so badly. (at least this is the way it is with me)
which is good because by these descriptions it means the FII is right for me, and that is what i ordered a couple days ago

obviously i dont have personal experiences to judge with, but as a cuber unexperienced with good speedcubes, it seems to me to be a good review. :tu
 
My main problem with the Alpha V is that it needs a lot of modification to be even decent.

When assembling the Alpha V and trying it out for the first time you WILL have to use sandpaper to remove impurities and leftover bulges from the plastic molds. Otherwise you will hear and feel how they will grind against each other. That doesn't mean that he Alpha V is a bad cube bit it needs a lot of attention and effort to make it good. The Haiyan mod is surely infamous in this case.

The F-II is hands down a better choice if you are lazy or just want a good cube straight out of the box. Not only does the F-II come pre-assembled and pre-lubed, it is incredibly smooth and properly adjusted straight out of he box.
However the stickers on the F-II are completely **** and will have to be replaced immediatly.
 
maybe its the lube making mine feel soo much different... i have no lube in my AV yet and i might be just putting some maplins silicone spray in it to make it slide a bit better whilst it breaks in a bit but really i dont think it needs the lube too much.. its still fast just... doesnt feel smooth and glidey

i prefer FII out of the box by a long way but AV is... growing on me... i just need to mod it and break it in much more

That's your problem. Lube it. It DOES make a difference. Though I personally hate maplin silicone spray
 
Back
Top