Difference between revisions of "Studio Cube"

From Speedsolving.com Wiki
m (clean up)
(adjust)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
The '''Studio Cube''' is a 3x3x3 manufactured by Rubik's in Hungary. It shares many similarities with the original cubes manufactured in the 1980s, such as vinyl stickers (unlike the paper stickers laminated with PET, as found on current store bought cubes) and flat centers (as opposed to the arched centers found on most modern cubes). The center caps are also removable to allow access to the adjustable screws, although initial removal may be difficult.
+
The '''Rubik Studio Cube''' is a 3x3x3 manufactured by Rubik's Studio in [[Hungary]]. It shares many similarities with the original cubes manufactured in the 1980s, such as vinyl stickers (unlike the laminated paper stickers used on Rubik's Cubes in the 1990s/2000s) and flat centers (as opposed to the arched centers found on later cubes). The center caps are also removable to allow access to the adjustable screws, although initial removal may be difficult.
  
Purchase price is variable, currently about $15.49 plus shipping on eBay (as of 2010), going up to $20 in 2007. The higher than average price can be attributed to the low numbers of cubes produced per year, hand assembly, and labour costs, all in comparison to Asian manufacturers.
+
From around 2003 [[Ton Dennenbroek]] had a special arrangement to make the Studio Cube available to the speedcube community. He sold them for around $24.[https://web.archive.org/web/20030803233007/http://www.speedcubing.com/ton/buy1.htm]
  
Opinions about its suitability for speedsolving vary, although generally it is not a preferred cube, due to the flat centres (more prone to pops), required break-in, and possible modifications required (replacements of springs, screws, and possibly the core).   
+
Purchase price is variable, about $20 on eBay in 2007, and about $15.49 plus shipping in 2010.  The higher than average price can be attributed to the low numbers of cubes produced per year, hand assembly, and labour costs, all in comparison to Asian manufacturers. 
 +
 
 +
Opinions about its suitability for speedsolving varied, although generally it was not a preferred cube due to the flat centres (more prone to pops), required break-in, and possible modifications required (replacements of springs, screws, and possibly the core).   
  
 
[[Image:Studio-cube2.jpg|none|thumb|Studio Cube]]
 
[[Image:Studio-cube2.jpg|none|thumb|Studio Cube]]
Line 10: Line 12:
  
 
== See also ==
 
== See also ==
* [[Puzzle Hardware]]
+
* [[Rubik's Brand]]
  
 
== External links ==
 
== External links ==
 
* Speedsolving.com: [http://www.speedsolving.com/forum/showthread.php?t=12659 Review of Main 3x3x3 Cube Models]
 
* Speedsolving.com: [http://www.speedsolving.com/forum/showthread.php?t=12659 Review of Main 3x3x3 Cube Models]
 +
*[http://www.speedcubing.com/ton/pages/Rubik's%2022%20Studio%20Hungary%202000.htm Rubik's Studio Cube, year 2000 version], Ton Dennenbroek
  
 
[[Category:3x3x3 cubes]]
 
[[Category:3x3x3 cubes]]
{{Stub}}
 

Latest revision as of 19:02, 8 August 2017

The Rubik Studio Cube is a 3x3x3 manufactured by Rubik's Studio in Hungary. It shares many similarities with the original cubes manufactured in the 1980s, such as vinyl stickers (unlike the laminated paper stickers used on Rubik's Cubes in the 1990s/2000s) and flat centers (as opposed to the arched centers found on later cubes). The center caps are also removable to allow access to the adjustable screws, although initial removal may be difficult.

From around 2003 Ton Dennenbroek had a special arrangement to make the Studio Cube available to the speedcube community. He sold them for around $24.[1]

Purchase price is variable, about $20 on eBay in 2007, and about $15.49 plus shipping in 2010. The higher than average price can be attributed to the low numbers of cubes produced per year, hand assembly, and labour costs, all in comparison to Asian manufacturers.

Opinions about its suitability for speedsolving varied, although generally it was not a preferred cube due to the flat centres (more prone to pops), required break-in, and possible modifications required (replacements of springs, screws, and possibly the core).

Studio Cube
Studio Cube Centres

See also

External links