Difference between revisions of "Sledgehog"

From Speedsolving.com Wiki
(added example solve, fixed grammer errors)
(fixed algorithm numbers)
Line 7: Line 7:
 
|variants= Tripod, CFOP, Snyder Method
 
|variants= Tripod, CFOP, Snyder Method
 
|steps= 5
 
|steps= 5
|algs= 71
+
|algs= 59
 
|moves= not been calculated
 
|moves= not been calculated
 
|purpose= speedsolving, fmc
 
|purpose= speedsolving, fmc
Line 24: Line 24:
 
4. Place the remaining three edges using up to 2 sledgehammer algorithms. If parity occurs, use a J-perm to swap the two edges
 
4. Place the remaining three edges using up to 2 sledgehammer algorithms. If parity occurs, use a J-perm to swap the two edges
  
5. Finish the remaining corners using either hexafusion or one of the 62 algorithms.
+
5. Finish the remaining corners using either hexafusion or one of the 50 algorithms.
  
 
== corners ==
 
== corners ==
There are 4 possible types of cases that can be encountered while solving corners using the Sledgehog method. The first and most straightforward case method is where one corner is solved, and the other three are cycled. There are 36 different algorithms in this set.
+
There are 4 possible types of cases that can be encountered while solving corners using the Sledgehog method. The first and most straightforward case method is where one corner is solved, and the other three are cycled. There are 24 different algorithms in this set.
  
 
The next type of case is one where all the corners are placed, but some are rotated. For this case you may just use beginners corners or use advanced algorithms.
 
The next type of case is one where all the corners are placed, but some are rotated. For this case you may just use beginners corners or use advanced algorithms.

Revision as of 14:30, 5 April 2018

Sledgehog method
Tripod method.gif
Information about the method
Proposer(s): Ryan Vigil
Proposed: 2017
Alt Names: "The Best Method", sledgedog
Variants: Tripod, CFOP, Snyder Method
No. Steps: 5
No. Algs: 59
Avg Moves: not been calculated
Purpose(s): speedsolving, fmc


A method, proposed by Ryan Vigil in late 2017, based on tripod and sledgehammers. As a more intuitive method, it can be used to generate a good skeleton for FMC if steps are done loosely.

The Steps

1. Build a cross. Very intuitive

2. Build F2L-1. This step can be done as the first step, using blockbuilding

3. Finish tripod. This step is done intuitively.

4. Place the remaining three edges using up to 2 sledgehammer algorithms. If parity occurs, use a J-perm to swap the two edges

5. Finish the remaining corners using either hexafusion or one of the 50 algorithms.

corners

There are 4 possible types of cases that can be encountered while solving corners using the Sledgehog method. The first and most straightforward case method is where one corner is solved, and the other three are cycled. There are 24 different algorithms in this set.

The next type of case is one where all the corners are placed, but some are rotated. For this case you may just use beginners corners or use advanced algorithms.

The 3rd type of case is where no corner is in the right place. this alg set has 27 algorithms, but you may just use a triple sledgehammer to reduce it to the 2nd type of case. Not all of these algs have been generated.

hexafusion

The final type of case is where one corner is placed, but it is rotated. For this step you use a combination of (R' D' R D) (or a sort of warped sexy move) and U to both orient and permute the remaining corners. This process is call hexafusion because if (R' D' R D) is done 6 times, the cube will return to a solved state. If the U and U' moves are placed correctly, you can solve all the corners with the six "sexy moves". Hexafusion can be difficult to wrap your head around, and can only really be learned by practice.

Example solve

Scramble: R' U L R2 F L' D' L2 B F L' U' F2 U2 R2 L2 U D2 L2 U'

Solve:

Cross: x' D' L' D' U' R D' F B2

F2L-1: R U2 R' U' B' U' B U2 L' U' L2 F' L' F R' U2 R2 U R'

Tripod: y U' R U' R' F' U L' U' L F

Remaining edges: F R' F' R

Parity: R U2 R' U' R U2 L' U R' U' L

Hexafusion: (first corner) (R' D' R D) (fixing later problems) U' 2(D' R' D R) (second corner) U2 3(R' D' R D) (last two corners) U2 2(D' R' D R)

pros

This method has potential for blockbuilding, adding freedom into the solve. A lucky scramble can get you nice blocks, and therefore quicker solves. All of the 3 corner algs are 12 moves or less, therefore being very fast to learn. In addition, during the sledgehammer stage, additional sledgehammers can be used to force a corner in, giving you a better corner case.

cons

When you are using this method, lookahead is very difficult. It is very hard with a quick glance to tell the difference between a double corner swap and a hexafusion case, not to mention recognizing the corner swap cases.

Also, there are more rotations with this method, as corners can position themselves on any of three axes for a case.

Variants

This method was developed independently of Ryan Heise's Tripod method, and is similar only in the construction of tripod. But even in that, Heise's method was developed for blockbuilding, and Vigil's sledgehog was designed with F2L in mind. However, these methods could be mixed in matched to cater to each scramble.

It can also be compared to CFOP, because both rely on F2L, but sledgehog leaves a slot to work with.

Sledgehog also has a subset in common with Anthony Snyder's method, as the last three corner subset is used in both.