Difference between revisions of "ShengEn"
(→Type-B) |
(→Type-B) |
||
Line 17: | Line 17: | ||
[http://cube4you.com/index.php?gOo=goods_search_list.dwt&gcat=31>ype= Type B cubes] are the worst cubes for speedcubing. Oddly enough, many of the more 'exotic' cube colors are of this type, such as transparent cubes. | [http://cube4you.com/index.php?gOo=goods_search_list.dwt&gcat=31>ype= Type B cubes] are the worst cubes for speedcubing. Oddly enough, many of the more 'exotic' cube colors are of this type, such as transparent cubes. | ||
− | [[Image:Type_b.jpg|none|thumb|Type-B Cube]] | + | [[Image:Type_b.jpg|none|thumb|White Type-B Cube]] |
=== Type-F I === | === Type-F I === |
Revision as of 00:52, 4 February 2010
|
Manufacturer of the type-B and type-F 3x3x3 cubes.
Products
Type-B
Type B cubes are the worst cubes for speedcubing. Oddly enough, many of the more 'exotic' cube colors are of this type, such as transparent cubes.
Type-F I
|
Type F cubes are different in that instead of having caps on the inside of the pieces (as all cube pieces are hollow) they have caps on the OUTSIDE so as to keep the rubbing surfaces as smooth as possible. Unfortunately, the core is of bad quality, and deteriorates quickly after lubing. It can be replaced with an A core and improved. Type F cubes often considered to be the smoothest cubes on the market. They turn relatively fast and are used by some speedcubers.
Type-F II
Type-F II cubes are widely considered to be similar in turning quality to the Type-F, but without the drawbacks of Core deterioration. Many cubers use this cube. The cube has the curious characteristic of slightly rounded cubies and edges that are truncated and capped. The rounded cubies cause average 3x3 stickers to be just under 1mm too small. This cause tiles to extend out from the cubies a little. The truncated edges are presumably to reduce friction in the cube and prevent the edges interfering with the core. This cube is quite light compared to other cubes, which coupled with the smooth turning gives the cube a delicate feel.
|
Under the correct tensioning this cube can cut 3/4 of the centre piece with minimal effort and without popping.
See Also
External Links
- www.sheng-en.cn
- Speedsolving.com: Comparison of Chinese DIYs
|