Difference between revisions of "Roux method"

From Speedsolving.com Wiki
m (→‎External links: Tutorial in French from speedcubingtips.eu)
(15 intermediate revisions by 12 users not shown)
Line 14: Line 14:
 
}}
 
}}
  
The '''Roux Method''' (French pronunciation: [ʁu]) is a 3x3 speedsolving method invented by [[Gilles Roux]]. Unlike the [[Fridrich]] and [[Petrus]] methods, the inventor of this method has used it to achieve an official sub-15 average. Similarities can be drawn to the Petrus method's block building and the [[Waterman method]]'s layer-on-the-left and edges-last aspects.
+
'''Roux''' (French pronunciation: [ʁu]) is a [[Rubik's cube]] speedsolving method invented by [[Gilles Roux]]. Unlike the [[CFOP method|CFOP]] and [[Petrus method|Petrus]] methods, the inventor of this method has used it to achieve an official sub-15 [[average]]. It is the favorite method of many top OH solvers. Similarities can be drawn to the Petrus method's block building and the [[Waterman method]]'s layer-on-the-left and edges-last aspects.
  
==The Steps==
+
==Steps==
  
 
1. Build a 1x2x3 block anywhere on the cube.
 
1. Build a 1x2x3 block anywhere on the cube.
Line 22: Line 22:
 
2. Build a second 1x2x3 block opposite of the first 1x2x3 block, without disrupting the first 1x2x3 block.  After this step, there should be two 1x2x3 blocks: one on the lower left side, and one lower right side, leaving the U slice and M slice free to move.
 
2. Build a second 1x2x3 block opposite of the first 1x2x3 block, without disrupting the first 1x2x3 block.  After this step, there should be two 1x2x3 blocks: one on the lower left side, and one lower right side, leaving the U slice and M slice free to move.
  
3. Simultaneously [[orient]] and [[permute]] the remaining 4 corners on the top layer (U-slice).  You can use [[CMLL]],[[COLL]], or Corner OLL's (along with the T and Y permutation) to do this.
+
3. Simultaneously [[orient]] and [[permute]] the remaining 4 corners on the top layer (U-slice).  You can use [[CMLL]],[[COLL]], or Corner OLL's (along with the T or J, and Y permutation) to do this.
  
 
4a. [[Orient]] the 6 remaining edges using only M and U moves (UF, UB, UL, UR, DF, DB need to be oriented correctly).
 
4a. [[Orient]] the 6 remaining edges using only M and U moves (UF, UB, UL, UR, DF, DB need to be oriented correctly).
Line 37: Line 37:
 
*It is also more intuitive and requires fewer algorithms.  
 
*It is also more intuitive and requires fewer algorithms.  
 
*After the first block is built the rest of the cube can be solved mostly with R, r, M and U moves thus eliminating rotations.
 
*After the first block is built the rest of the cube can be solved mostly with R, r, M and U moves thus eliminating rotations.
*Statistically it is one of the best methods, as shown by [[Alex Lau]]'s success in the WCA.
 
 
*CMLL is one of the best algorithm sets as there are only 42 cases and most algorithms are fast OLLCPs from CFOP
 
*CMLL is one of the best algorithm sets as there are only 42 cases and most algorithms are fast OLLCPs from CFOP
 
*The blockbuilding and intuitive nature of the method allows for rapid improvements in lookahead and inspection
 
*The blockbuilding and intuitive nature of the method allows for rapid improvements in lookahead and inspection
Line 44: Line 43:
 
==Cons==
 
==Cons==
  
*Block building can be difficult for a beginner to get used to. The reliance on r and M moves may also be difficult for some people, so much so that cubers who have trouble with M turns should probably not use this as their main method (or better, practice the M moves). Slice turns can also be slower than [[OBTM|outer turns]].
+
*Block building can be difficult for a beginner to get used to. The reliance on r and M moves may also be difficult for some people, so much so that cubers who have trouble with M turns should probably not use this as their main method (or better, practice the M moves).
 
*Since the M-slice is used often, especially in the final stages, there is a larger chance of a [[DNF]] rather than a [[+2]] if the solver misses the second flick in an M2, or if the solver misses the last M move. It is a DNF because M uses both the R and L face in one.
 
*Since the M-slice is used often, especially in the final stages, there is a larger chance of a [[DNF]] rather than a [[+2]] if the solver misses the second flick in an M2, or if the solver misses the last M move. It is a DNF because M uses both the R and L face in one.
 
*The M-slice becomes increasingly difficult with higher [[order]] puzzles. With [[7x7x7]] and [[6x6x6]], many argue that Roux is essentially unusable; however, with practice, one may be able to do well with it on [[big cubes]].
 
*The M-slice becomes increasingly difficult with higher [[order]] puzzles. With [[7x7x7]] and [[6x6x6]], many argue that Roux is essentially unusable; however, with practice, one may be able to do well with it on [[big cubes]].
Line 63: Line 62:
 
EOLR: a variant proposed by Gilles Roux and further documented by Alex Lau, Kian Mansour, and Iuri Grangeiro. It combines steps 4A and 4B of the method, orienting edges and placing ULUR on the D layer simultaneously. The cases are all intuitive, as they involve performing the EO case from different angles to set up a "good arrow" where ULUR can then be placed on bottom.  
 
EOLR: a variant proposed by Gilles Roux and further documented by Alex Lau, Kian Mansour, and Iuri Grangeiro. It combines steps 4A and 4B of the method, orienting edges and placing ULUR on the D layer simultaneously. The cases are all intuitive, as they involve performing the EO case from different angles to set up a "good arrow" where ULUR can then be placed on bottom.  
  
UFUB: Instead of solving ULUR edges in 4B, UFUB are solved. This can lead to more efficient solutions, but lookahead becomes much more difficult. It is most useful for skipping the "dots" 4C case.  
+
UFUB: Instead of solving ULUR edges in 4B, UFUB are solved. This can lead to more efficient solutions, but lookahead becomes much more difficult. It is most useful for skipping the "dots" 4C case, but requires center recognition and more lookahead.
  
 
Misoriented centres: Standard roux involves orienting all 6 edges relative to the centre colour that is on the bottom of the blocks. Instead, we can orient them relative to the front colour. As with UFUB, efficiency is improved, but lookahead is hindered. This is most useful for known EOLR cases.
 
Misoriented centres: Standard roux involves orienting all 6 edges relative to the centre colour that is on the bottom of the blocks. Instead, we can orient them relative to the front colour. As with UFUB, efficiency is improved, but lookahead is hindered. This is most useful for known EOLR cases.
  
== Notable Users ==
+
== Notable users ==
 
* [[Gilles Roux]] [http://www.worldcubeassociation.org/results/p.php?i=2004ROUX01]
 
* [[Gilles Roux]] [http://www.worldcubeassociation.org/results/p.php?i=2004ROUX01]
 
* [[Thom Barlow]] (Kirjava) [http://www.worldcubeassociation.org/results/p.php?i=2006BARL01]
 
* [[Thom Barlow]] (Kirjava) [http://www.worldcubeassociation.org/results/p.php?i=2006BARL01]
Line 99: Line 98:
 
* [http://www.speedsolving.com/forum/showthread.php?29123-The-reconstruction-thread&p=634675&viewfull=1#post634675 Reconstruction for BigGreen's unofficial Ao5 9.51]
 
* [http://www.speedsolving.com/forum/showthread.php?29123-The-reconstruction-thread&p=634675&viewfull=1#post634675 Reconstruction for BigGreen's unofficial Ao5 9.51]
 
* [http://games.groups.yahoo.com/group/speedsolvingrubikscube/message/5923 Original Method Proposal]
 
* [http://games.groups.yahoo.com/group/speedsolvingrubikscube/message/5923 Original Method Proposal]
 +
* [https://www.speedcubingtips.eu/methode-de-resolution-roux/ Tutorial in French]
  
  

Revision as of 10:54, 6 July 2019

Roux method
Roux method.gif
Information about the method
Proposer(s): Gilles Roux
Proposed: 2003
Alt Names: none
Variants: none
No. Steps: 4
No. Algs: 9-42
Avg Moves: Speed:48, FM:28-
Purpose(s):


Roux (French pronunciation: [ʁu]) is a Rubik's cube speedsolving method invented by Gilles Roux. Unlike the CFOP and Petrus methods, the inventor of this method has used it to achieve an official sub-15 average. It is the favorite method of many top OH solvers. Similarities can be drawn to the Petrus method's block building and the Waterman method's layer-on-the-left and edges-last aspects.

Steps

1. Build a 1x2x3 block anywhere on the cube.

2. Build a second 1x2x3 block opposite of the first 1x2x3 block, without disrupting the first 1x2x3 block. After this step, there should be two 1x2x3 blocks: one on the lower left side, and one lower right side, leaving the U slice and M slice free to move.

3. Simultaneously orient and permute the remaining 4 corners on the top layer (U-slice). You can use CMLL,COLL, or Corner OLL's (along with the T or J, and Y permutation) to do this.

4a. Orient the 6 remaining edges using only M and U moves (UF, UB, UL, UR, DF, DB need to be oriented correctly).

4b. Solve the UL and UR edges, preserving edge orientation. After this step, both the left and right side layers should be complete.

4c. Solve the centers and edges in the M slice, see Last Six Edges.

See also: L5E

Pros

  • Like the Petrus method, the Roux method uses fewer moves than the popular Fridrich method.
  • It is also more intuitive and requires fewer algorithms.
  • After the first block is built the rest of the cube can be solved mostly with R, r, M and U moves thus eliminating rotations.
  • CMLL is one of the best algorithm sets as there are only 42 cases and most algorithms are fast OLLCPs from CFOP
  • The blockbuilding and intuitive nature of the method allows for rapid improvements in lookahead and inspection
  • The LSE step of Roux is very easy to master, as it has easy lookahead and allows for fast, 2-gen MU TPS.

Cons

  • Block building can be difficult for a beginner to get used to. The reliance on r and M moves may also be difficult for some people, so much so that cubers who have trouble with M turns should probably not use this as their main method (or better, practice the M moves).
  • Since the M-slice is used often, especially in the final stages, there is a larger chance of a DNF rather than a +2 if the solver misses the second flick in an M2, or if the solver misses the last M move. It is a DNF because M uses both the R and L face in one.
  • The M-slice becomes increasingly difficult with higher order puzzles. With 7x7x7 and 6x6x6, many argue that Roux is essentially unusable; however, with practice, one may be able to do well with it on big cubes.
  • The M-slice is very difficult with OH, and OH Roux solvers almost always need to utilize table abuse and therefore can pretty much never solve one-handed away from a table or other surface. However, if one practices doing one-handed M-slices, it can be done very well but only with a table (which shouldn't be a concern in competitions).

Improvement

Free/non-linear blocks: The first block and second block do not need to be built in that order. You can build part of one and finish the other later. This is very useful when there are a lot of free, pre-built blocks and pairs.

Non-matching centres: The first two blocks can be built around incorrect centres. This allows for more efficiency and allows rouxers to take advantage of pre-built blocks. The centres are corrected directly before CMLL with either u M' u' or u' M' u.

Some Roux users have learned multiple algorithms for each CLL case, each affecting edges in a different way. This allows for manipulation of edge orientation, leading to an easier LSE. This is called CMLLEO.

Possibly another improvement is to expand to solving any of the four second blocks. This means that the D-layer colors of the two blocks don't have to match. This is called non-matching blocks. One negative, if someone has already learned a recognition method for CLL, is that to easily use the full range of second block options, a switch to NMCLL recognition is necessary. Another is that LSE EO is a bit more difficult to recognize in some solves.

Pinkie Pie: a variant proposed by Alex Lau in 2016, it involves orienting the UL/UR edges on the D layer while using an OLLCP algorithm to orient the remaining edges and solving the remaining corners. The user then will get a 4a skip and a very easy 4b step. While this may seem good, many faster Rouxers are of the opinion that it is simply better to influence the EO step and not go to all the hassle of placing UL/UR on D and having to recognise an OLLCP. There is also the reason that many Roux solvers use the method to have less algorithms and do not want to learn the huge OLLCP algset.

EOLR: a variant proposed by Gilles Roux and further documented by Alex Lau, Kian Mansour, and Iuri Grangeiro. It combines steps 4A and 4B of the method, orienting edges and placing ULUR on the D layer simultaneously. The cases are all intuitive, as they involve performing the EO case from different angles to set up a "good arrow" where ULUR can then be placed on bottom.

UFUB: Instead of solving ULUR edges in 4B, UFUB are solved. This can lead to more efficient solutions, but lookahead becomes much more difficult. It is most useful for skipping the "dots" 4C case, but requires center recognition and more lookahead.

Misoriented centres: Standard roux involves orienting all 6 edges relative to the centre colour that is on the bottom of the blocks. Instead, we can orient them relative to the front colour. As with UFUB, efficiency is improved, but lookahead is hindered. This is most useful for known EOLR cases.

Notable users


Forum links

External links