Speedsolving.com Wiki - User contributions [en]

Road to Sub-15 Second Averages

2008-08-28T02:11:27Z

71.197.68.255: /* 40-55 */

Here we present some ideas as to how to break 15 seconds consistently with the Fridrich method.

== Using the Fridrich Method ==
Reaching 15-second averages may be obtained via the following tips -- to be performed in chronological order.

# [[Beginner's Methods|Beginner's Method]]
#* First learn how to solve the Rubik's cube using a tutorial, such as one in the [[Beginner's Methods]] section.
#** Tip: Solve with your cross on the bottom! It ''will'' help you out later.
#* Learn how to [[Lubrication|lubricate]] your cube.
#* Use a timer, such as an [[Web-based Software#Web-based Timers|online timer]] or a [[PC Software#Standalone Timers|PC timer]] to see your progression.
# Learn [[2-look OLL]] algorithms.
# Learn [[2-look PLL]] algorithms.
# Learn to do the [[F2L| First Two Layers (F2L)]] efficiently.
#* Use a tutorial, such as [http://ca.youtube.com/watch?v=k-xbcAMfWwM Badmephisto's YouTube Tutorial on F2L].
#* Your times will temporarily get worse, but after a few days of practicing, they will rapidly become better.
#* Practice F2L -- practice a lot. F2L is undeniably the most important part.
# Learn full (1-look) [[PLL]].
#* 21 algorithms to learn.
#* At this point, consider buying a [[Cubes#Cubes|DIY Cube]]. Assuming look-ahead is good, focusing on speed might be important now.
# Learn full (1-look) [[OLL]].
#* 57 algorithms. Don't learn them too quickly, otherwise recognition will be impeded upon. But don't learn them too slowly; try to learn ''consistently''. Steady, slow or fast, will always win the race.
# Look into [[advanced F2L techniques]], such as the [[extended cross]] (also known as ''X-cross''), or other extensions to the Fridrich Method, such as [[COLL]] for suitable LL cases..

== How to get faster with the Fridrich Method ==
''This was written by the members of the speedsolving forum in this thread: http://www.speedsolving.com/forum/showthread.php?t=3688 - Posted by someone... and edited by [[User:Rubik's Cube Fan|Rubik's Cube Fan]]''

This thread will be provided as a little tutorial for people who are stuck and want to become faster in solving the Rubik's Cube. Please read this thread and do some forum searching prior to asking questions about becoming faster. First off, the most important factor is practice. Regardless of how many algorithms you cram or optimize, it really boils down to practice. A sub 20 second average can be achieved using a basic beginners method, however, it takes practice. More algorithms are useful to help with your understanding of the cube, and very importantly, your recognition, but these will not get you nearly as far as practice will get you. In spite of this, which is the best way to go about getting those times down, apart from practice alone? Here are some basic, set out steps to follow to help you on your way (note this is only a guideline to help you). You do not have to follow these steps, as this is only to guide you.

Here's a video of one of the top cubers, [http://www.youtube.com/watch?v=qLki-254ZKA Erik Akkersdijk, getting a sub 20 second average only using a Layer By Layer method with Fridrich 4 Look Last Layer.]

=== Fridrich Method: Step 1 ===

'''Current Average:''' 1:30+ or don't know how to solve a Rubik's Cube

'''Goal Average:''' 1:00-1:19

Learn the method from one of these two sources: [http://www.stanford.edu/%7Eleyanlo/cube_solution.pdf Leyan’s Beginners Method], or [http://youtube.com/watch?v=ofZFUgaxlTQ&feature=PlayList&p=4A19F1D174B975BD&index=4 Badmephisto's Youtube Video Tutorial].

NOTE: It is possible to achieve sub-1 minute with these methods

If you are still stuck, follow these tips:

* Try to reduce pauses, meaning try to never stop turning during your solve
* [http://www.youtube.com/watch?v=TPC17CMPDTU Sand], [http://www.youtube.com/watch?v=5xQ0ywP-bbU Break in], and [http://www.youtube.com/watch?v=s0rjg7ckq-0 Lubricate Your Cube] (In that order, and only sand if your cube is brand new and you've barely solved it).
* Decrease your last layer times (about 25 seconds or less) - you can do this by improving your recognition and execution for each case
* Work on solving the cross. Try to do the cross in 12 moves or less, and under 12 seconds. Here are some links which will help you achieve/learn this:
** http://www.cubefreak.net/cross.html
** http://www.cubestation.co.uk/cs2/ind...op/cross/cross
* Use finger tricks (this will speed up your times A LOT)
* Practice - The more you practice, the faster you'll become
* Once you get a little used to the beginner method, you can also try inserting the first layer/side corners from different angles. See Macky's guide: http://cubefreak.net/easy_fast.html
* Use a timer to see your progression: http://www.cubetimer.com

''Estimated Time: 2-4 Weeks''

--------------------------------------------------------------------------------------------------------------------------

=== Fridrich Method: Step 2 ===

'''Current Average:''' 1:00-1:19

'''Goal Average:''' 40 - 50 seconds

Learn 4 look last layer (4LLL). (Links to where to learn the algorithms will be at the end of this guide)

2 Look OLL

* Edge Orientation - 2 algorithms

* Corner Orientation - 7 algorithms

2 Look PLL

* Corner Permutation - 3 Algorithms Aa/Ab and E/V/Y/Na/Nb

* Edge Permutation - 4 algorithms - Ua, Ub, Z, H

Here are a couple of videos explaining how to use the 4LLL (2 Look OLL + 2 Look PLL) algorithms for your last layer:

* 2 Look OLL: http://youtube.com/watch?v=DTYvklyOpVM

* 2 Look PLL: http://youtube.com/watch?v=S61q3FYVFis

''Estimated Time: 2-4 weeks''

---------------------------------------------------------------------------------------------------------------------------------------

=== Fridrich Method: Step 3 ===

'''Current Average:''' 40-55 seconds

'''Goal Average:''' 30-39 seconds

* Now learn [http://youtube.com/watch?v=k-xbcAMfWwM&feature=PlayList&p=0B7E0E5922B76D76&index=7 '''intuitive''' First Two Layers] (F2L).
* Your times will temporarily get worse, but after a few days of practicing, they will become better greatly!
* Practice your F2L, and never give up!

''Estimated Time: 2-3 weeks''

-------------------------------------------------------------------------------------------------------------------------------------------

=== Fridrich Method: Step 4 ===

'''Current Average:''' 30-40 seconds

'''Goal Average:''' 20-29 seconds

* Now, learn the rest of the PLLs so your 2 Look PLL becomes 1 Look PLL - 21 Algorithms (you have already learned 7 algorithms for 2-Look PLL) (Links where to learn the algorithms are at the end of this guide
* Learn how to look ahead during F2L - this will tremendously help your times

''Estimated Time: 2-6 weeks''

-------------------------------------------------------------------------------------------------------------------------------------------

=== Fridrich Method: Step 5 ===

'''Current Average:''' 20-30 seconds

'''Goal Average:''' Sub 20 seconds

* Practice your F2L, learn/make up your own techniques, and possibly learn some of the algorithms for odd cases. (Links where to learn the F2L algorithms are at the end of this guide) Also, remember to look ahead! Try to complete your cross and F2L in 12 seconds or less on average
* Master all your PLLs and OLLs that you know. Meaning optimize it to your maximum speed, try to use the triggers, and try to get all of them under 3 seconds for recognition and execution.
* Get your cross sub 4 seconds consistently (make sure you solve the cross on the bottom of the cube.)

''Estimated Time: 1-2 Months''

-------------------------------------------------------------------------------------------------------------------------------------------

=== Fridrich Method: Step 6 ===

'''Current Average:''' Sub 20 Seconds

'''Goal Average:''' 15 Seconds or less

* Master your Cross and F2L, try to finish them in 10 seconds or less on average
* Get your cross done in ~2 seconds on average
* Learn the rest of the OLL algorithms - 57 algorithms (Note that you should completely master everything else before learning these, as they will only help you by about 3 seconds or less)
* To learn/memorize the OLL's easier look at [http://youtube.com/watch?v=I1Lb-eFXzro Badmephisto's video]
* Practice, practice, and keep on practicing!!
''
Estimated Time: 4+ months''

--------------------------------------------------------------------------------------------------------------------------------------

=== Fridrich Method Algorithms ===

'''F2L Algorithms:'''

* http://www.cubestation.co.uk/cs2/ind...3/cfop/f2l/f2l
* http://www.cubewhiz.com/f2l.html
* http://www.cubefreak.net/F2L.html
* http://solvethecube.co.uk/
* http://erikku.110mb.com/F2L.html

'''OLL Algorithms:'''

* http://www.speedsolving.com/showthread.php?t=766
: 2 Look OLL for Corner Orientation are cases 21-27.
* http://cubewhiz.com/ollprint.html
: 2 Look OLL for Corner Orientation are cases 4-10

'''PLL Algorithms:'''

* http://www.speedsolving.com/showthread.php?t=708
* http://cubewhiz.com/pllprint.html
* http://erikku.110mb.com/PLL.html

Corner Permutation are the Aa/Ab and E/V/Y/Na/Nb permutation algorithms.

Edge Permutation are the Ua, Ub, H, and Z permutation algorithms.

You should print out your OLLs/PLLs so you can learn them and use them at any time. Keep in mind that you should choose the algorithms that best suit you. Just because one person is
fast with an algorithm doesn't mean you will be fast with the same algorithm.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

=== Remarks: How can i get as fast as Nakajima? ===

Speed up your f2l. Nakajima has crazy f2l. If you want to study advanced f2l, forget cubeloop! almost half of the algs there are inefficient and are difficult to recognize. Nakajima's 106 advanced f2l cases are way better! here's the link:

http://www.cubingtechniques.com/cubing/algorithmsbank/f2l/

(You might want to use this [http://translate.google.com/translate_t translator])

It's in japanese though, so you might not understand the explanations but the algorithms are right there for your disposal. Try also [http://jmbaum.110mb.com/ Jason Baum's cubing page]. It contains the best OLL and PLL algs (i think, they're even better than macky's or vandenbergh's) for ambidextrous cubers.

== From noober cuber to UBER CUBER! ==

''Written by Lotsofsloths in this thread: http://masterthecube.com/forums/index.php?topic=1008.0 - Posted by Pcwiz''

=== 1:30+ ===

Use [http://www.masterthecube.com/Rubik%27sLBLmethod Tucker's Beginners Method],

to acheive an average of 1:00-1:19.

If you are still stuck, follow these tips:

Try to reduce Pauses.

Lube your cube.

Decrease Last layer times.

You can decrease Last Layer times by improving yor recognition for each case.

''Est. Time: 3 Weeks''

=== 1:00-1:19 ===

Once you acheive these times;

I strongly suggest you learn [http://masterthecube.com/forums/index.php?topic=1008.0 4 look last layer].

Once you goto that link, DON'T learn F2l!! Just learn the last layer part of it.

This includes:

Edge Orientation(2)

Corner Orientation(1-7)

Edge Permutation(1-4)

Corner Permutation(1-3)

''Est. Time: 3 weeks - 2 monthes''

=== 40-55 ===

[http://www.youtube.com/watch?v=smaSzO9k8OU I suggest from here that you now learn F2l.]

This WILL increase your times at first, but in a couple days it should decrease your times GREATLY!

Now, practice your F2l.

''Est. Time: 2 weeks''

=== 30-40 ===

[http://www.cubingsloth.co.nr/ I now suggest that you learn ALL THE PLLS!]

''Est. Time: 2-3 Months''

=== 20-30 ===

Work on yor F2l,

Possibly use the algs.

You should end up at 12ish F2l.

ALSO:

MASTER(sub 3) all of your PLLs and OLLs that you know.
''
Est. Time: 3-4 months''

=== Sub-20 ===

Learn all 57 OLLs, AND PRACTICE!

''Est. Time: ???''

== External links ==
* [http://www.cubefreak.net/speedcubing.html Macky's Guide]
* [http://www.speedsolving.com/forum/showthread.php?t=3688 Speedsolving Forum's ''How to Get Faster with the Fridrich Method'' Guide]
* [http://www.speedsolving.com/forum/showthread.php?t=3688 Masterthecube Forum's ''From noober cuber to UBER CUBER'' guide]

Road to Sub-15 Second Averages

2008-08-28T02:11:13Z

71.197.68.255: /* 30-40 */

Here we present some ideas as to how to break 15 seconds consistently with the Fridrich method.

== Using the Fridrich Method ==
Reaching 15-second averages may be obtained via the following tips -- to be performed in chronological order.

# [[Beginner's Methods|Beginner's Method]]
#* First learn how to solve the Rubik's cube using a tutorial, such as one in the [[Beginner's Methods]] section.
#** Tip: Solve with your cross on the bottom! It ''will'' help you out later.
#* Learn how to [[Lubrication|lubricate]] your cube.
#* Use a timer, such as an [[Web-based Software#Web-based Timers|online timer]] or a [[PC Software#Standalone Timers|PC timer]] to see your progression.
# Learn [[2-look OLL]] algorithms.
# Learn [[2-look PLL]] algorithms.
# Learn to do the [[F2L| First Two Layers (F2L)]] efficiently.
#* Use a tutorial, such as [http://ca.youtube.com/watch?v=k-xbcAMfWwM Badmephisto's YouTube Tutorial on F2L].
#* Your times will temporarily get worse, but after a few days of practicing, they will rapidly become better.
#* Practice F2L -- practice a lot. F2L is undeniably the most important part.
# Learn full (1-look) [[PLL]].
#* 21 algorithms to learn.
#* At this point, consider buying a [[Cubes#Cubes|DIY Cube]]. Assuming look-ahead is good, focusing on speed might be important now.
# Learn full (1-look) [[OLL]].
#* 57 algorithms. Don't learn them too quickly, otherwise recognition will be impeded upon. But don't learn them too slowly; try to learn ''consistently''. Steady, slow or fast, will always win the race.
# Look into [[advanced F2L techniques]], such as the [[extended cross]] (also known as ''X-cross''), or other extensions to the Fridrich Method, such as [[COLL]] for suitable LL cases..

== How to get faster with the Fridrich Method ==
''This was written by the members of the speedsolving forum in this thread: http://www.speedsolving.com/forum/showthread.php?t=3688 - Posted by someone... and edited by [[User:Rubik's Cube Fan|Rubik's Cube Fan]]''

This thread will be provided as a little tutorial for people who are stuck and want to become faster in solving the Rubik's Cube. Please read this thread and do some forum searching prior to asking questions about becoming faster. First off, the most important factor is practice. Regardless of how many algorithms you cram or optimize, it really boils down to practice. A sub 20 second average can be achieved using a basic beginners method, however, it takes practice. More algorithms are useful to help with your understanding of the cube, and very importantly, your recognition, but these will not get you nearly as far as practice will get you. In spite of this, which is the best way to go about getting those times down, apart from practice alone? Here are some basic, set out steps to follow to help you on your way (note this is only a guideline to help you). You do not have to follow these steps, as this is only to guide you.

Here's a video of one of the top cubers, [http://www.youtube.com/watch?v=qLki-254ZKA Erik Akkersdijk, getting a sub 20 second average only using a Layer By Layer method with Fridrich 4 Look Last Layer.]

=== Fridrich Method: Step 1 ===

'''Current Average:''' 1:30+ or don't know how to solve a Rubik's Cube

'''Goal Average:''' 1:00-1:19

Learn the method from one of these two sources: [http://www.stanford.edu/%7Eleyanlo/cube_solution.pdf Leyan’s Beginners Method], or [http://youtube.com/watch?v=ofZFUgaxlTQ&feature=PlayList&p=4A19F1D174B975BD&index=4 Badmephisto's Youtube Video Tutorial].

NOTE: It is possible to achieve sub-1 minute with these methods

If you are still stuck, follow these tips:

* Try to reduce pauses, meaning try to never stop turning during your solve
* [http://www.youtube.com/watch?v=TPC17CMPDTU Sand], [http://www.youtube.com/watch?v=5xQ0ywP-bbU Break in], and [http://www.youtube.com/watch?v=s0rjg7ckq-0 Lubricate Your Cube] (In that order, and only sand if your cube is brand new and you've barely solved it).
* Decrease your last layer times (about 25 seconds or less) - you can do this by improving your recognition and execution for each case
* Work on solving the cross. Try to do the cross in 12 moves or less, and under 12 seconds. Here are some links which will help you achieve/learn this:
** http://www.cubefreak.net/cross.html
** http://www.cubestation.co.uk/cs2/ind...op/cross/cross
* Use finger tricks (this will speed up your times A LOT)
* Practice - The more you practice, the faster you'll become
* Once you get a little used to the beginner method, you can also try inserting the first layer/side corners from different angles. See Macky's guide: http://cubefreak.net/easy_fast.html
* Use a timer to see your progression: http://www.cubetimer.com

''Estimated Time: 2-4 Weeks''

--------------------------------------------------------------------------------------------------------------------------

=== Fridrich Method: Step 2 ===

'''Current Average:''' 1:00-1:19

'''Goal Average:''' 40 - 50 seconds

Learn 4 look last layer (4LLL). (Links to where to learn the algorithms will be at the end of this guide)

2 Look OLL

* Edge Orientation - 2 algorithms

* Corner Orientation - 7 algorithms

2 Look PLL

* Corner Permutation - 3 Algorithms Aa/Ab and E/V/Y/Na/Nb

* Edge Permutation - 4 algorithms - Ua, Ub, Z, H

Here are a couple of videos explaining how to use the 4LLL (2 Look OLL + 2 Look PLL) algorithms for your last layer:

* 2 Look OLL: http://youtube.com/watch?v=DTYvklyOpVM

* 2 Look PLL: http://youtube.com/watch?v=S61q3FYVFis

''Estimated Time: 2-4 weeks''

---------------------------------------------------------------------------------------------------------------------------------------

=== Fridrich Method: Step 3 ===

'''Current Average:''' 40-55 seconds

'''Goal Average:''' 30-39 seconds

* Now learn [http://youtube.com/watch?v=k-xbcAMfWwM&feature=PlayList&p=0B7E0E5922B76D76&index=7 '''intuitive''' First Two Layers] (F2L).
* Your times will temporarily get worse, but after a few days of practicing, they will become better greatly!
* Practice your F2L, and never give up!

''Estimated Time: 2-3 weeks''

-------------------------------------------------------------------------------------------------------------------------------------------

=== Fridrich Method: Step 4 ===

'''Current Average:''' 30-40 seconds

'''Goal Average:''' 20-29 seconds

* Now, learn the rest of the PLLs so your 2 Look PLL becomes 1 Look PLL - 21 Algorithms (you have already learned 7 algorithms for 2-Look PLL) (Links where to learn the algorithms are at the end of this guide
* Learn how to look ahead during F2L - this will tremendously help your times

''Estimated Time: 2-6 weeks''

-------------------------------------------------------------------------------------------------------------------------------------------

=== Fridrich Method: Step 5 ===

'''Current Average:''' 20-30 seconds

'''Goal Average:''' Sub 20 seconds

* Practice your F2L, learn/make up your own techniques, and possibly learn some of the algorithms for odd cases. (Links where to learn the F2L algorithms are at the end of this guide) Also, remember to look ahead! Try to complete your cross and F2L in 12 seconds or less on average
* Master all your PLLs and OLLs that you know. Meaning optimize it to your maximum speed, try to use the triggers, and try to get all of them under 3 seconds for recognition and execution.
* Get your cross sub 4 seconds consistently (make sure you solve the cross on the bottom of the cube.)

''Estimated Time: 1-2 Months''

-------------------------------------------------------------------------------------------------------------------------------------------

=== Fridrich Method: Step 6 ===

'''Current Average:''' Sub 20 Seconds

'''Goal Average:''' 15 Seconds or less

* Master your Cross and F2L, try to finish them in 10 seconds or less on average
* Get your cross done in ~2 seconds on average
* Learn the rest of the OLL algorithms - 57 algorithms (Note that you should completely master everything else before learning these, as they will only help you by about 3 seconds or less)
* To learn/memorize the OLL's easier look at [http://youtube.com/watch?v=I1Lb-eFXzro Badmephisto's video]
* Practice, practice, and keep on practicing!!
''
Estimated Time: 4+ months''

--------------------------------------------------------------------------------------------------------------------------------------

=== Fridrich Method Algorithms ===

'''F2L Algorithms:'''

* http://www.cubestation.co.uk/cs2/ind...3/cfop/f2l/f2l
* http://www.cubewhiz.com/f2l.html
* http://www.cubefreak.net/F2L.html
* http://solvethecube.co.uk/
* http://erikku.110mb.com/F2L.html

'''OLL Algorithms:'''

* http://www.speedsolving.com/showthread.php?t=766
: 2 Look OLL for Corner Orientation are cases 21-27.
* http://cubewhiz.com/ollprint.html
: 2 Look OLL for Corner Orientation are cases 4-10

'''PLL Algorithms:'''

* http://www.speedsolving.com/showthread.php?t=708
* http://cubewhiz.com/pllprint.html
* http://erikku.110mb.com/PLL.html

Corner Permutation are the Aa/Ab and E/V/Y/Na/Nb permutation algorithms.

Edge Permutation are the Ua, Ub, H, and Z permutation algorithms.

You should print out your OLLs/PLLs so you can learn them and use them at any time. Keep in mind that you should choose the algorithms that best suit you. Just because one person is
fast with an algorithm doesn't mean you will be fast with the same algorithm.

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------

=== Remarks: How can i get as fast as Nakajima? ===

Speed up your f2l. Nakajima has crazy f2l. If you want to study advanced f2l, forget cubeloop! almost half of the algs there are inefficient and are difficult to recognize. Nakajima's 106 advanced f2l cases are way better! here's the link:

http://www.cubingtechniques.com/cubing/algorithmsbank/f2l/

(You might want to use this [http://translate.google.com/translate_t translator])

It's in japanese though, so you might not understand the explanations but the algorithms are right there for your disposal. Try also [http://jmbaum.110mb.com/ Jason Baum's cubing page]. It contains the best OLL and PLL algs (i think, they're even better than macky's or vandenbergh's) for ambidextrous cubers.

== From noober cuber to UBER CUBER! ==

''Written by Lotsofsloths in this thread: http://masterthecube.com/forums/index.php?topic=1008.0 - Posted by Pcwiz''

=== 1:30+ ===

Use [http://www.masterthecube.com/Rubik%27sLBLmethod Tucker's Beginners Method],

to acheive an average of 1:00-1:19.

If you are still stuck, follow these tips:

Try to reduce Pauses.

Lube your cube.

Decrease Last layer times.

You can decrease Last Layer times by improving yor recognition for each case.

''Est. Time: 3 Weeks''

=== 1:00-1:19 ===

Once you acheive these times;

I strongly suggest you learn [http://masterthecube.com/forums/index.php?topic=1008.0 4 look last layer].

Once you goto that link, DON'T learn F2l!! Just learn the last layer part of it.

This includes:

Edge Orientation(2)

Corner Orientation(1-7)

Edge Permutation(1-4)

Corner Permutation(1-3)

''Est. Time: 3 weeks - 2 monthes''

=== 40-55 ===

[http://www.youtube.com/watch?v=smaSzO9k8OU I suggest from here that you know learn F2l.]

This WILL increase your times at first, but in a couple days it should decrease your times GREATLY!

Now, practice your F2l.

''Est. Time: 2 weeks''

=== 30-40 ===

[http://www.cubingsloth.co.nr/ I now suggest that you learn ALL THE PLLS!]

''Est. Time: 2-3 Months''

=== 20-30 ===

Work on yor F2l,

Possibly use the algs.

You should end up at 12ish F2l.

ALSO:

MASTER(sub 3) all of your PLLs and OLLs that you know.
''
Est. Time: 3-4 months''

=== Sub-20 ===

Learn all 57 OLLs, AND PRACTICE!

''Est. Time: ???''

== External links ==
* [http://www.cubefreak.net/speedcubing.html Macky's Guide]
* [http://www.speedsolving.com/forum/showthread.php?t=3688 Speedsolving Forum's ''How to Get Faster with the Fridrich Method'' Guide]
* [http://www.speedsolving.com/forum/showthread.php?t=3688 Masterthecube Forum's ''From noober cuber to UBER CUBER'' guide]

Lubrication

2008-08-27T22:50:43Z

71.197.68.255: /* Other */

== Description ==
This page contains descriptions of different lubricants and suggestions for use. Suggested usage of lube includes disassembling a cube to insert the lube, applying, and turning the cube to work it in. It is also recommended that you do not apply lube to stiffer cubes, as this can sometimes make them even harder to turn.

== Silicon-Based ==
Silicon-based lubricants are a highly popular and effective way to lubricate cubes.

===Jig-A-Loo===
Used by many cubers, this lubricant works very well. However, it can melt plastic temporarily, so it is recommended that you completely disassemble your cube to lubricate it, and that you let the pieces dry well before reassembly. Jig-a-loo in fact melts the plastic temporarily, but after drying it out everything gets back to normal.
* Take a look at [http://www.speedsolving.com/forum/showthread.php?t=5129&highlight=jigaloo&page=2 THIS] thread for detailed discussion on Jig-a-loo

===Rubik's Lube===
This is the lube that comes in a syringe-like container when you order from Rubiks.com.
* [http://www.rubiks.com/Shop/Products/Rubiks%20Cube%20Lube%20Kit%203x3.aspx Rubik's Cube Lube]

===CRC Silicon Spray===
CRC silicon spray has been used by many cubers. This is a very good lubricant to use. It will dry out soon, but works well.

===Cubelube.com===
This is Exactly The Same Lube from Rubiks.com.Just a Different Packaging and site.Also, The price Is much Cheaper than Rubiks.com
http://cubelube.com/ click here

== Petroleum-Based ==
These include lubricants such as vaseline or WD-40. It is '''Strongly suggested you use these with caution''', as petroleum and petroleum distillates speed the aging of plastic, and may dissolve the plastic.

===Vaseline===
Goopy and well known, this is not the best lube. It may eat at the plastic and gum up, making the cube harder to turn.

===WD-40===
Known for damaging cubes and making them harder to turn, this does not act as a lubricant for the plastic at all. It is recommended you '''do not use this'''.

== Other ==
Other types of lubricants

=== Cooking No-stick Spray ===
Yes, PAM. Not necessarily the cleanest or best thing to use, it works nonetheless. It does not eat at the plastic and can be just as effective as shock oil on a loose cube. It is recommended you clean out your cube frequently if you use this.

=== White Lithium Grease ===
There are some mixed results of this lubricant, but it does work fairly well. The cube will have a sticky feeling after using it, though it wears off after some breaking-in.