From Speedsolving.com Wiki
(Redirected from
Type-FII)
| Sheng-en Cube
|
|
| Company
|
| Founded:
| 2004
|
| Location:
| China
|
| Years Active:
| 2004-present
|
| Areas served:
| Worldwide
|
| Website:
| http://www.sheng-en.cn/
|
| Production
|
| Products:
| Type-B, Type-F, Type-F II
|
|
Manufacturer of the type-B and type-F 3x3x3 cubes.
Products
Type-B
Type B cubes are one of the inferior DIY types. Oddly enough, many of the more 'exotic' cube colors are of this type, such as transparent cubes. They can be used in hybrid cubes, for example Erik Akkersdijk (world record holder) used type-B cubie's with a Rubik's DIY core as his main cube.
Type-F
| Ratings for Type-F
|
| Based on 4 ratings
|
| Smoothness/Speed:
| 8.5
|
| Lockup Resistance:
| 8.5
|
| Cutting Corners:
| 8.25
|
| Pop Resistance:
| 7.25
|
| Quietness:
| 7.0
|
| Reliability:
| 7.0
|
| Weight:
| 79g
|
| Overall:
| 8.18
|
|
Type F cubes are different in that instead of having caps on the inside of the pieces (as all cube pieces are hollow) they have caps on the OUTSIDE so as to keep the rubbing surfaces as smooth as possible. Unfortunately, the core is of bad quality, and deteriorates quickly after lubing. It can be replaced with an A core and improved. Type F cubes often considered to be the smoothest cubes on the market. They turn relatively fast and are used by some speedcubers.
Type-F II
Type-F II cubes are widely considered to be similar in turning quality to the Type-F, but without the drawbacks of Core deterioration. Many cubers use this cube. The cube has the curious characteristic of slightly rounded cubies and edges that are truncated and capped. The rounded cubies cause average 3x3 stickers to be just under 1mm too small. This cause tiles to extend out from the cubies a little. The truncated edges are presumably to reduce friction in the cube and prevent the edges interfering with the core. This cube is quite light compared to other cubes, which coupled with the smooth turning gives the cube a delicate feel.
| Ratings for Type-F II
|
| Based on 5 ratings
|
| Smoothness/Speed:
| 9.6
|
| Lockup Resistance:
| 8.4
|
| Cutting Corners:
| 8.9
|
| Pop Resistance:
| 9.1
|
| Quietness:
| 7.0
|
| Reliability:
| 8.8
|
| Weight:
| 81g
|
| Overall:
| 9.33
|
|
Under the correct tensioning this cube can cut 3/4 of the centre piece with minimal effort and without popping. An interesting characterstic with F-ii's is that with the rounded cubies, you can "reverse corner cut". This means you can slightly misalign the top layer (set it up by pushing the top layer slightly in the direction of U) and you can still cut downwards with an R'.
|
|
|
| Where to buy:
Take note, if buying from popbuying, there have been reports that they send type-F's where type-FII's were ordered.
|
See Also
External Links
| This page is a DNF!
You can help our Wiki by finishing it. Login, or create an account and add anything you know!
|
|
